News:

Changes Continue... Scott Hamilton

Main Menu

Mini Classifieds

1973 Pinto Wagon

Date: 05/06/2022 05:13 pm
1976-1979 FORD PINTO BOBCAT FRONT HOOD TRIM MOLDING D4FZ-16856-A OEM EXCELLENT

Date: 09/22/2020 11:33 pm
1977 Cruiser
Date: 06/29/2019 06:28 am
2.0 Mickey Thompson SUPER RARE cam cover and belt guard
Date: 08/27/2018 11:11 am
76 Pinto Wagon
Date: 07/08/2020 05:44 pm
Interior Parts
Date: 08/07/2017 03:59 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/18/2017 05:55 pm
Need 76' coupe rear Glass and Front Grille
Date: 07/20/2017 01:23 am
Early Rare Small window hatch
Date: 08/16/2017 08:26 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,593
  • Total Topics: 16,270
  • Online today: 445
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 211
  • Total: 211
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

73 Pangra Project

Started by turbopinto72, May 05, 2003, 06:42:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TIGGER

Quote from: turbopinto72 on May 01, 2005, 04:44:46 PM
And yet another view of the "shiney" garage. ( Im sure Scotts garage will be even more shiney).
Brad, the car looks real good with the Torque Thrusts on there.  Nice choice!
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

wagonmaster

Hey Brad, have you had a chance to drive it at all yet? Are the brakes working properly now? Starting to look SHINEY!!!  ;)
Brien - wagonmaster
'85 LTD LX
'85 LTD Squire wagon

crazyhorse

Hey brad, haven't you heard?... A clean garage is a sign of a sick mind!?! LOL

Peronally I think both are lookin GREAT! Knowing all the work that went INSIDE the Pangra & what went on it that garage for the last month or so, I know MY stuff wouldn't look that good!
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

Pintony

Hey Brad,
Those wheels look familiar. ;D
Loose the blacked out taillight frames. TOO much Black.
Nothing looks better than Black and Chrome!!!!!
From Pintony

turbopinto72

And yet another view of the "shiney" garage. ( Im sure Scotts garage will be even more shiney).
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

So the clear coat did not go well but at least I have a clean garage. Here are a few pic's of the ( not yet done car" but a clean garage. 8)
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

Its never too late to start clear coating your car ( even when its 2 days before a show.......... :o :o )
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

Quote from: Sir Hugh on April 11, 2005, 11:46:35 PM
Hey, is this the car you are trying to finish for the Knott's Ford show? If it is, oh man will it be a sight to see. You have done some fantastic work from what I can seen. Can't wait to see it in person. Good Luck! :D

Yes, this is the one and its giving me fits BUT I think I'm wining............. :P
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

Brian, the oil galley plug was only 1/2 of the equation. after I fired it up I STILL did not have oil pressure. So, I once again removed the aux cover plate but noticed that my fix was working. I could spin the dist shaft and see no oil leaking out the plug. The oil pressure would go up to 25 lbs then drop down to 12. SO..............off goes the pan.................again......... however I did find the culprit. It seams that the oil pick up tube had loosened from the pump causing a mass leak inside the block. Its fixed now............... >:( >:( >:( :o.........Any way Now I'm working on fitting the Hood ( which needs some massaging). Nothing like taking it down to the wire. OH BTW, I fixed the throttle cable bracket so it does not move. I added another bracket to it. More news to come tomorrow....
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

Sir Hugh

Hey, is this the car you are trying to finish for the Knott's Ford show?  If it is, oh man will it be a sight to see.  You have done some fantastic work from what I can seen.  Can't wait to see it in person.  Good Luck!  :D
Loving my plum 1978 Pinto Hatchback.  He has a rebuilt engine and is running like new. Beautiful. He still needs a new paint job though.

wagonmaster

Hey Brad, did you have much trouble getting the oil galley plug taken care of?
Brien - wagonmaster
'85 LTD LX
'85 LTD Squire wagon

TIGGER

79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

78pinto

good job, get the test run on video, i'd love to see it!
** Jeff (78Pinto) is Missing from us but will always be a part of our community- We miss you Jeff **

turbopinto72

Quote from: 79panel on April 10, 2005, 12:37:08 PM
On Friday, April 8th, I went down and helped Brad with his Pangra. We got the brakes working, the doors and decklid aligned and working well, and determined why the oil pressure went away when running the engine to test changes Brad had done. All-in-all, a fairly productive day, plus, for lunch, Brad fed me one of the best pita sandwiches I've ever had!! :) I'll let Brad fill in all the details later!
Yes, many many Thanks to Brian for all the help with the car. I have yet to try out the brakes........ :o.......... But I'm sure they will work well..... ;D........ This weekend I got the door handles back from the powdercoater and installed them as well as the inside panels etc.Got the front fenders on ( finally, after dropping one of them while the paint was wet and spending about 5 extra hours doing scratch repair and fixing a piece of gel coat that fell off........ >:( ). Any way, a little more paint and some clear coat and a test run.........everybody cross their fingers... ;)
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

wagonmaster

On Friday, April 8th, I went down and helped Brad with his Pangra. We got the brakes working, the doors and decklid aligned and working well, and determined why the oil pressure went away when running the engine to test changes Brad had done. All-in-all, a fairly productive day, plus, for lunch,  Brad fed me one of the best pita sandwiches I've ever had!!  :)  I'll let Brad fill in all the details later!
Brien - wagonmaster
'85 LTD LX
'85 LTD Squire wagon

CHEAPRACER

I installed a high volume pump on a previous 2.3 project and while bump starting the engine to check valve lash, it  shot the oil across my ceiling and down my brother before figured we should throw the cover on.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

turbopinto72

Well, hear is a good one for ya all. after firing the car up and running it  I noticed that the oil pressure guage was pegged at 100+ lbs oil pressure. I figured it was broken or something so I installed a mechanical guage at the oil feed to the turbo. It to showed 100+ lbs oil pressure. After a few days of thinking and calls to both Dan and Dwayne Esslinger it was concluded that my Hi volume/Hi pressure Melling oil pump was defective. Dwayne said he thinks I could have hada up to 200 lbs oil pressure ( this would be the bad part). SO, I called Summit, they called Melling and the next day at 9:00 am I had a new ( stock) oil pump. I pulled the rack, dropped the sway bar, pulled the pan, installed the new pump etc......... Fired it up and now have 70 lbs oil pressure at 1300 rpm cold and about 60 lbs warm ( from a STOCK pump). Who needs anything more????? as a matter of fact its probbably to much ( I will be changing oil from 20/50 to a streight wt oil.   :o >:( :P ;D
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

Thanks. I got the interior done and doors painted now. The Powder coater jacked up my door handles, front window trim and rear bumper....... >:( >:(, needless to say im not happy................ >:( >:(
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

bricker4864


Glassman

 :o Looking great as usual, Brad.  The bench looks like the back of my wagon when I was working on it.




Wheres that sound clip?  And I dont mean cow....rooster....bark :P

turbopinto72

So, what does a work bench look like when Painting............ :-\
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

You guys know how I like shiney...... ;D This is four coats of base, each coat wet sanded between with 1500 over four coats of primer and the first clear coat.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

A few up date pictures on the paint. The door is 3 coated with base and a small repair going on. The body has the first clear coat.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

crazyhorse

OWWWWWWW!!!!! Been there, done that I had a radiator cap blow off (of course I was being stupid & opening it while it was hot) I was standing directly in front of it & got the most of it on my chest. It didn't feel right for a week or two. Now I know what a lobster feels like!!!
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

turbopinto72

Thanks, I appreciate the comment. My SHINEY was almost tarnished yesterday when I was running it for the first time. About 10 min into the break-in cycle the upper radiator came off and blew hot antifreeze/water all over the place. The other bad thing was I was standing right in front of it when it happened and got doused with 180 deg water. Cant tell you how that su@ks, I got burned on both legs and one arm. Still does not fell great today ( the good news is I got all of it off my SHINEY parts............ :o :o ::) :'(
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

crazyhorse

Brad, the Pangra is lookin BEAU_TI_FUL!!! It's so nice that you may not get points in a show cuz the judges were blinded by the SHINEY!!  :P Thanks to guys like you the Pinto is WELL represented!
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

turbopinto72

Quote from: Pintony on March 05, 2005, 11:12:52 PM
Hey Brad,
I like your credo "Your Never Too Old To Go Fast"
Do you ever go REALLY fast and think??? "Did I Double Check the torq on those lug nuts?" ;D
From Pintony

hehehe, well, the other credo is " the older I get the more I need to doubble check things". I cant tell you how many nuts and bolts I find loose............. :o
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

Pintony

Hey Brad,
I like your credo "Your Never Too Old To Go Fast"
Do you ever go REALLY fast and think???  "Did I Double Check the torq on those lug nuts?" ;D
From Pintony

turbopinto72

Allmost ready for some paint.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

turbopinto72

And it all went down to the metal ( and fiberglass ).........just about ready to paint.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto