Mini Classifieds

Wanted Dash for Pinto up to 1975
Date: 01/19/2020 09:06 am
Ford Speedometer Hall-Effect sensor with 6 foot speedometer cable

Date: 12/30/2022 01:30 pm
Intake manifolds

Date: 03/06/2021 03:04 pm
1975 Pinto wagon emissions decal wanted
Date: 09/20/2018 11:01 pm
4-14" Chrome Plated Wheels 4 x 108 + 0mm offset with new tires

Date: 09/12/2018 12:33 pm
ENGINE COMPLETE 1971 PINTO
Date: 12/28/2017 03:55 pm
Esslinger 2.0 intake
Date: 03/06/2017 11:58 am
I'm looking for a 78 or older Pinto near Alberta
Date: 08/13/2021 10:39 am
2 Pinto Wagons for Sale

Date: 10/29/2018 02:02 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 628
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 560
  • Total: 560
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

My Cruiser Wagon Project.....

Started by TIGGER, July 31, 2006, 12:23:06 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

bbobcat75

got to love the bright orange!!!
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

TIGGER

Not sure if they will continue this one or start a new one. 
I am sad to see it go as I have owned it for 8 years.  But I hardly drove it this year and have not done much to it restoration wise since I put it on the road three years ago.  So in that respect I am ok with it going to a new home.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

dave1987

Sorry to hear you sold the car! :( At least you can still monitor progress of the car via internet since they are becoming members! Or are they not planning to continue the work log?
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

TIGGER

I sold the car today :'(   It is going to a good home in Phoenix though.  The new owners are real nice people and will be finishing what I started.  Stay tuned for part 2 as they will become members here.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

TIGGER

Quote from: dave1987 on November 08, 2010, 01:54:46 AM
Hey TIGGER, curious as I am working on my wiper post leaks, what did you use to replace the "gasket material" for your posts? I don't know what the original stuff is or what to use as a suitable replacement.

Dave, I used 3M Flexible strip caulk (31050).  I made a couple loops with the stuff around the flange as well as around the screws just to be safe.  It is about $20 for 20 yards.  It is great stuff, I use it for all sorts of things.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

77pintocw

Hey dave1987:

I'm about to finish restoring my '77 Cruising Wagon and when I got
to the wiper posts I used some of the extra Dynamat sound deadening
material to make perfect copies of the original gasket material.  It works
great and keeps any leaks from occurring around the posts.

77pintocw
1977, Pinto Cruising Wagon, White with Blue Graphics

dave1987

Hey TIGGER, curious as I am working on my wiper post leaks, what did you use to replace the "gasket material" for your posts? I don't know what the original stuff is or what to use as a suitable replacement.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

TIGGER

I got the motor out last weekend.  I pulled the pan to make sure everything was ok.  While I was there, I replaced the rear main seal again.  Aparently I put one half in backwards the last time I had it out.  Rookie mistake on my part.  I got it in right this time.  I also pulled the head and replaced the headgasket as it too was leaking oil.  That is one thing I did not do last time I had the engine out.  I finished putting all the acessories on Friday night and got the engine in last night.  I did not have time to work on it today but I should have it running by the end of the week.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

TIGGER

I got the engine almost ready to pull.  I have one more bellhousing bolt to remove and it is ready to come out.  It went pretty quick, about 3 hours.  I hopefully will have time after work tomorrow to play with it again.  I am thinking the flex plate was making the noise as the converter bolts were loose.  One had backed quite a ways out, not good.  I hope that was it and there was no damage to the tranny.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

TIGGER

Well the car is off the market as the engine started knocking this week.  I am not sure what happened.  It ran fine on the way to work on Wednesday and then on my way home the motor started knocking when I started it.  It went away under accelleration and then would come back at an idle.  I am not sure what the problem is yet but I think I am just going to swap motors again :(
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

douglasskemp

Quote from: discolives78 on July 16, 2009, 10:07:19 PM
I just thought of them as really nice Pinto's (look, a tach and gauges!)

Have to agree.  I like my little black 1987 'Pinto'.  I especially like driving for 3 weeks on one tank of gas.  :lol:  Oh, and with the 235/60R15s on it, I like being able to out corner the little Honda crapfests that are around here.  :evil:  Nothing like taking a 35mph corner @ 70!  :2fast4u:
The Pinto I had I gave to my brother. The car was originally my mom's, (78 red Pinto sedan with a 2.3 and a 4spd.) I am originally from Tucson, AZ but moved to Oxnard CA :D
I'm looking for a Pinto wagon with an automatic.

discolives78

It shows how much styling matters, huh? I liked the fox mustangs from 83 to 93-the taillights on the 79-82 were cool, but I didn't like the angular "egg-crate" front. Looked better after they rounded it off. I don't care for 94-04 'Stangs. The newer ones are way cool. Mustang II's are an acquired taste, I guess. I like them more for their family relation to the Pinto than for their own merit.

That saleen is pretty cool! Nice to see a rare car in good hands.

I had a 83 3.3L Mustang GL :-\, an 85 2.3 :D, and an 87 2.3 :(. I just thought of them as really nice Pinto's (look, a tach and gauges!)

Chuck :afro:


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

TIGGER

For the most part, I like them all.  I have a 67 Coupe, 96 GT, and now this Saleen.  My wife sold her 00 GT a couple months ago.  Some day I will have a 65 or 66 fastback. 

Back in 86 there was a Saleen like mine that lived in my neighborhood.  I don't know for sure yet but it may even be the same car.  Anyway, ever since then I have wanted a fox body Saleen.  It is just ironic that it is the same year and color I fell in love with.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

r4pinto

Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

Mike Modified

 ;D The only person who needs to like a car is the one who owns it.   ;)  I'm not overly fond of the early Fox-bodies 'stangs, but the Saleens are an entirely different cup of tea.   It's certainly much more desirable than the mundane Mustang. 

Mike

75bobcatv6

imo those Mustangs werent worth anything. but thats my opinion. I hated the way the made mustangs look from the the Mustang II till now.

TIGGER

I was restoring the CW back to original, down to the AM radio.  IMO both cars are worth more original than modified, especially the Saleen.   
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

r4pinto

Quote from: Mike Modified on July 12, 2009, 01:32:05 PM
???

Take the V-8 out of an $8-10,000 car and transplant it into a $3000 car.  End up with a $3000 V-8 car and $1500 hulk.

Not on my watch!   ;D

Mike

Gotta agree with you there Mike. I know it's a Pinto but destroy a rare car for a Pinto, Nope.. that would be wrong, especially being one of 26 made that year. Who knows how many are left.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

Mike Modified

 ???

Take the V-8 out of an $8-10,000 car and transplant it into a $3000 car.  End up with a $3000 V-8 car and $1500 hulk.

Not on my watch!   ;D

Mike

75bobcatv6

Quote from: dholvrsn on July 12, 2009, 12:55:44 PM
I would have transplanted the 'Stang engine into the porthole Pinto.  :P
;D

same here =)

dholvrsn

I would have transplanted the 'Stang engine into the porthole Pinto.  :P
;D
'80 MPG Pony, '80-'92
'79 porthole wagon, '06-on
'80 trunk model. '17-on
-----
'98 Dodge Ram 1500
'95 Buick Riviera
'63 Studebaker Champ
'57 Studebaker Silver Hawk
'51 Studebaker Commander Starlight
'47 Studebaker Champion
'41 Studebaker Commander Land Cruiser

Mike Modified

Really nice.  Selling off your CW to keep that had to have been an easy decision.

Mike

TIGGER

The car had been sitting for the last 10 years.  It needs some TLC but nothing I can't handle.  The majority of the Saleen stuff is present and in good shape.  The 4th matching grey wheel came with the car but was damaged.  I have since had it repaired and had the tire swapped this afternoon so the black wheel on the drivers front is no longer on the car.  Other than the decals, the only things missing is the correct 86 rear wing and 3rd brake light.  I have found both but neither will be cheap to purchase.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

Mike Modified

Good choice!  Got any pics?

Mike

TIGGER

I would keep the CW if I could but the wife said if I want the Saleen, I have to get rid of something...
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

r4pinto

Can't say I blame you there. You can find many cruising wagons but not a rare find like the 86 Saleen you got.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

TIGGER

Yep it is for sale.  I bought an 86 Saleen in grey.  The car is one of 26 for that year.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

Mike Modified

78 Ford Pinto Factory Crusing Wagon (Beaverton/Aloha)

http://portland.craigslist.org/wsc/pts/1264227189.html

This Craigslist sale is this car, right?  So, what did you buy that this has to go? 

Just curious, it could easily be none of my business.   ;D

Mike

TIGGER

LOL, that wheel looks familar ;D  Nice job on the center.  It looks tons better.  You may try and take the horn off and clean the ground and contact.  Sometimes there is crud inside as well.  This may clean up your muffled sound.  When I was testing my last horn spare it sounded muffled however after I shaked out the crud from inside it now sounds normal.  It is off a 79-80, which is a little different, but it works so I am happy.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

discolives78

I got my horn working too, but it sounds 'muffled', so I guess I will need a new horn assembly too. I went back to the factory wheel, I modified the one I won off e-bay. I added wood trim and separate black crest with silver 'wings' from a Bobcat.

 

Chuck


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.