Mini Classifieds

INTERIOR DELUX ARM RESTS - 2 PAIR

Date: 03/23/2018 09:23 pm
1980 Pinto taillights
Date: 12/26/2017 03:48 pm
Need Clutch & Brake Pedal
Date: 12/23/2016 06:16 pm
1972-1980 Pinto/Bobcat Wagon Drivers Side Tail Light OEM

Date: 04/20/2017 10:10 am
upholstery for bucket seats
Date: 10/30/2018 08:44 am
Wanted Pinto Fiberglass Body Parts
Date: 08/16/2018 08:54 am
2.3 carb intake

Date: 07/15/2020 09:25 pm
Pinto hubcap
Date: 01/07/2017 08:40 pm
77 Cruising wagon Rear cargo light
Date: 10/02/2017 02:16 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 628
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 567
  • Total: 567
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

My V8 street Pinto project

Started by mrpinto, October 23, 2006, 12:41:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gearhead440

What rear leaf springs did you use for your V8?  I need to replace mine on a 1980 and need to know what spring rate would be best for a V8.
Speed is only a question of money: Just how fast do you want to go?

mrpinto

Not sure what year they are, but I'm pretty sure all Mustang II's are the same. I don't think they changed at all from '74 to '78. Some pipes had to be moved a bit, and the angle of the collectors had to be changed a bit
1979 302 Pinto Custom
1971 460 Drag Pinto

pintoman1972

Now the question is what year Mustang II headers did you modify?  I ask because I am looking for a set for mine.  Being a former drag car the present headers are pretty beat up.  I know every fit is different as there are no motor plates used in mine, just modified motor mounts.  But I have to start somewhere and knowing what fits yours is a start.  Thanks.

mrpinto

The headers are modified Mustang II.
1979 302 Pinto Custom
1971 460 Drag Pinto

pintoman1972

Mr Pinto,
What headers are on the car?

Dick

mrpinto

Wow, haven't been on here in forever, and just went back over this thread. OMG, brings back memories! haha, I'm so glad that it's done, and yet can't wait to start my next project, although it's not another Pinto.

I've got a few miles on the Pink Pinto, and had a ton of fun in it. Did some racing, got it as fast as 11 secs in the 1/4, then decided to build a full on drag version, so I sort of "detuned" the Pink car to improve the street manners. I now take it out the odd weekend, to car shows etc. Been a few years now and my bodywork seems to be holding up ok, haha.
Here's a pic I got this summer.


Also have a drag Pinto with a 460 that is about 90% complete, but I expect it to be a mid 9sec or so. I keep the two "girls" in my little "stable" ;)



As for my next project, being a pretty die hard Ford guy, I couldn't stray. But it's gonna be quite different than the Pinto. I can't wait to get at this thing. Still in the planning stages as of yet, but maybe I'll start a new project thread on it, although it isn't a Pinto.

1956 Ford f100

1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

New best at 12.26 @ 108mph. Going through the traps at 5300rpm, so more gear is in order.
1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

Did a best 12.51 the other day. It's never been timed properly, cause I didn't have a pointer installed. So when we got home, installed the pointer, and timed it, it was 10 degrees out!! So that might be good for half a second, maybe more.
1979 302 Pinto Custom
1971 460 Drag Pinto

nospinto72

NICE CAR   What did it run at the track?
dragracing rules

High_Horse

Coooollll!!!!
                                                             

                                                                           High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

mrpinto

Thanks guys! I had a blast driving the car for the first time in 6 years yesterday. And it's way different than it was before!!

The car runs good, considering it's not been tuned at all yet, and I'm still breaking it in. It's only timed by ear, and it's a little lean, so bigger jets or a bigger carb is in order. Even so, this car DOES NOT hook up at all with the slicks I got!! Smokes through 1st and 2nd! So once i get it tuned and hooked, I should get some good times.



1979 302 Pinto Custom
1971 460 Drag Pinto

High_Horse

Mr. Pinto, Congradulations on a job well done. With the completion of cars like this....of this caliber of quality and creativity.. sets the standards a little higher...Badass!!!!!!!!!!!!!!!

                                                                                                                                                 High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

75bobcatv6

Superb work on this car, I wish i could see this pinto in person ...

mrpinto

Slowest progress in history!!!



But after many delays , she's ALIVE!!!

http://www.facebook.com/home.php?#/video/video.php?v=76567400009&ref=nf

1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

Got some more progress pics. Hopefully have it on the track next week.

The fresh engine it it's new nest.


I think I overdid it with the 14x4" breather! Won't clear the hood even with the big scoop!!


New Proform electric water pump, Afco "Scirocco" aluminum race rad, 11x11" tranny cooler, and 12" Flexalite fan installed. Also a new K&N 11x2" Xstream Flow breather sits "under" the hood!


It's a TIGHT fit!!! :o


And when I say tight, that's exactly what I mean!



A bit of wiring, a few hoses and we're good to go! 8)


1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

I lost a lot of momentum on the Pinto. I quit my job and recently opened my own business, so my time was used up to say the least.

But now I'm back on track. Ready to bolt the engine and tranny in the car int the next day or two..


1979 302 Pinto Custom
1971 460 Drag Pinto

High_Horse

You do nice work....Two thumbs up!!!!!!!!!!!!!!!


                                                                      High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

beegle55

AWESOME PINTO. It's just amazing. So much quality custom work put into that car it is awesome.

     -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

mrpinto

After some delay due to finances, I finally have my engine pretty much together.

I snapped a few pics along the way.



1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

Quote from: dholvrsn on January 15, 2008, 10:41:58 AM
How'd you get der Merkur seats to fit?

I removed the original mounting hardware, and welded on the Pinto hardware and they bolted in like the originals. I got them for free, so I figured if they didn't work out it wasn't a big deal.

They're very comfortable seats, and after a little paint they also look very nice. They do sit a touch higher than the originals, but since I'm only 5'5", I'm not complaining! :D
1979 302 Pinto Custom
1971 460 Drag Pinto

dholvrsn

How'd you get der Merkur seats to fit?
'80 MPG Pony, '80-'92
'79 porthole wagon, '06-on
'80 trunk model. '17-on
-----
'98 Dodge Ram 1500
'95 Buick Riviera
'63 Studebaker Champ
'57 Studebaker Silver Hawk
'51 Studebaker Commander Starlight
'47 Studebaker Champion
'41 Studebaker Commander Land Cruiser

mrpinto

I haven't been on here in forever. I moved to a place where we can't get internet, if you can believe that! ???

Anyways, thanks for all the kind words. I'm having so much fun with this car, I can wait to get it finished so I can start another one!! haha

The progress has slowed a bit on the "Pinko" recently. I left my job and am currently starting to open my own business, so that kind of took care of my finances for a bit.

Right now I'm waiting on a few engine related parts so I can get the engine together. The extreme cam I got required me to get larger valve springs, and I decided to get the heads ported, along with a few other things. Hopefully, the engine will be assembled in a couple weeks and we can get it under the hood and start plumbing and wiring it.

This is my engine / drivetrain combo.

'88 306 block
SP power forged pistons
Ported World Windsor Jr. 180cc heads (1.94/1.60 valves)
Proform aluminum roller rockers
Comp XE282 roller cam  (.565 / .574 lift - 232 / 240 dur @)0.05) and matching springs
Ford Racing Hydro roller lifters
Weiand Stealth intake
MSD pro billet dist., coil and 6AL box and wires
Holley 650 mech. DP carb
Proform 35gpm electric water pump
SP high volume oil pump
Moroso 8qt oil pan
Carter electric fuel pump and Holley regulator

Rebuilt C4
Stage 2 Transgo manual valve body
Heavy duty clutches
B&M Megashifter

Rebuilt 8" rear
Motive 3:80 gear
Richmond 28 spline axles
Richmond Loc-Rite locker
Cooper Cobra 295/50R15 tires (26.5 high)


This combo should hopefully move this Pinto easily enough.

And of course I had to carry the color scheme under the hood! ;D





1979 302 Pinto Custom
1971 460 Drag Pinto

High_Horse

PopBumper,
       
Quote"D***" (as in, like, I'll never have a ride that nice, how can you even compete with something like this?)
The answer to that question is....Get out there and give her hell. This car inspires me.

                                                                                                                   High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

popbumper

When one takes the time to peruse this material, two emotions clearly emerge....

"WOW" (as in, like, wow does not even begin to cover it)...and....

"D***" (as in, like, I'll never have a ride that nice, how can you even compete with something like this?)

Words really can't express the sheer intellect of this project - you are to be congratulated, what a wonderful, well documented effort of love. I could only hope to aspire to such a level.

Chris :surprised:
Restoring a 1976 MPG wagon - purchased 6/08

High_Horse

Mr. Pinto,
                   Really nice!!!!!!!!!!!


                                                                                                                 High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

mrpinto

Haven't posted in a while, so here's a set to update y'all with Mr. Pinko!



I wasn't a fan of the opening in the valance, so I made a filler panel made out of perforated metal to fill the area but still let air flow through freely.

Got a set of seats out of a Murker XR4Ti, cleaned them up, used some fabric paint on the dark areas, and masked off the Pinto logos for a little custom touch.

Here's the freshly built 306 shortblock. New SP forged pistons, rods, turned crank, new timing set, and Comp .565/.574 lift roller cam. On top are going a pair of World Windsor Sr. 200cc heads. This Pinto is gonna fly!!
Oh BTW, the engine is going to be pink too!! 8)
1979 302 Pinto Custom
1971 460 Drag Pinto

mrpinto

Quote from: sharpe on September 01, 2007, 02:22:34 PM
i have a question about the rear, because i wanna lose my rear bumper too. is that all custom or did you put some pieces together to make that happen? also , what did you do about the huge bumper brackets did you cut them off? because i was looking and if i unbolt it there might be a problem with the leaf springs. thank you   

The back has a lot of custom work. The valance was welded on, and pieces were welded in the gap. Not to mention the tail lights and spoiler that really change the look of the car.

The bumper brackets were removed. I unbolted the bumper brackets and the leaf shackles, removed the bumper brackets and rebolted the shackles in place.
1979 302 Pinto Custom
1971 460 Drag Pinto

sharpe

i have a question about the rear, because i wanna lose my rear bumper too. is that all custom or did you put some pieces together to make that happen? also , what did you do about the huge bumper brackets did you cut them off? because i was looking and if i unbolt it there might be a problem with the leaf springs. thank you   

High_Horse

Well, I would expect that you would have reached the apex of this project. You continue to overwhelm my Pinto senses. As I am conventionally asperated I find it appropriate lately to make sure I have a paper bag to breathe into when approaching your thread. Maybe I am overreacting....puff...puff...puff.

I will give you some advise.......A good artist knows when to stop.
My advise.......Don't stop.
Observation......Puff...Puff...puff.........Badpuffass.


                                                        High_H........................
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

77turbopinto

Thanks to all U.S. Military members past & present.