Mini Classifieds

2.3 front sump oil pan
Date: 07/24/2018 03:17 pm
Parting out 77 Bobcat Hatch
Date: 11/06/2017 04:16 pm
1974 Pinto Door Handles

Date: 03/07/2017 04:06 pm
LOTS OF 1971-1973 PARTS FOR SALE
Date: 02/03/2018 11:28 am
73 2.0 Timing Crank Gear & Woodruff key WANTED
Date: 09/01/2017 07:52 am
2.0 Cyl Head1973
Date: 11/29/2018 12:51 pm
Misc pinto parts 71-73 2.0
Date: 05/05/2020 11:56 pm
Front sump oil pan
Date: 01/02/2017 06:54 pm
72 Pinto
Date: 03/07/2019 12:07 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,582
  • Total Topics: 16,269
  • Online today: 2,399
  • Online ever: 2,944 (Yesterday at 11:57:36 PM)
Users Online
  • Users: 0
  • Guests: 1510
  • Total: 1510
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

simple fat bumper fix

Started by JoeBob, September 25, 2011, 11:56:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

russosborne

After about 4 years I thought why not bring this up to the front again.

I will be doing this on the 79. So I had to dig and find it to read up on it again.

Maybe if it is back up front it will help someone else out as well.

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

74 PintoWagon

I think it looks great, that Plasti-Dip is cool stuff.
Art
65 Falcon 2DR 200 IL6 with C4.

JoeBob

a view of the back
77 yellow Bobcat hatchback
Deuteronomy 7:9

JoeBob

I finished the bumper retraction a few years ago. I was still just a bit unhappy. My bumpers were badly scratched. I could not afford to have them refinished. I came up with this fix. I sprayed them with plasti-coat. It gives them a rubber look. So many cars now have black rubber bumpers that even though this was not an option in 1977 it looks right. The plasti-coat is easily removed with no left over mess. tell me what you think.
Bill
77 yellow Bobcat hatchback
Deuteronomy 7:9

bbobcat75

This was way easier to do on my 78 wagon. Drilled a hole in absorber pressed them in with a 50 ton press at work then just drilled a hole thru and nut and bolted it into place worked great plus was able to get as much in as needed.  Did it to the front and rear bumpers. Just my 2 cents!
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

russosborne

Thanks.
I don't want to just push in the bumper bracket though. There is no way of knowing if it ends up in the right position or not. I want to make it totally adjustable so I can just easily move it in and out by hand until I have it just right and then drill it and bolt it. All the way in may not work. I just won't know until I can work with it.
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

Pinto5.0

Try setting the bumper bracket under the front crossmember of the car while it's jacked up & let the jack down slowly.

Personally I'd cut the piece that looks like an I beam down & weld it back together
'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

74 PintoWagon

Probably from age, time for a press too bad you're so far away..
Art
65 Falcon 2DR 200 IL6 with C4.

russosborne

yep, unfortunately it didn't help.
It is really tight. I don't know if it was supposed to be this way or if it is just old. I even tried burning the rubber out, but I don't think the propane torch gets hot enough. Although I did stink up the neighborhood pretty good.
Going to have to get them pressed out I guess.

Oh, for anyone reading this, don't try beating on the plate that bolts on to the reinforcement to knock it out. I tried that after hitting it on the other end for several minutes, all I did was bend the plate. It might be ok if you are trying to knock it in though.

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

74 PintoWagon

Ahhh, a little incentive, LOL.. ;D ;D
Art
65 Falcon 2DR 200 IL6 with C4.

russosborne

That I have, just no way to really keep everything from flying when I hit it.
But my wife has me so p.o'ed right now I am going to go out and beat on it and see what happens.
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

74 PintoWagon

Quote from: russosborne on August 25, 2014, 10:42:35 PM
I don't have any thing other than my two hands to hold, beat, drill, etc. I don't think I could do it with these. Not enough hands.
thanks,
Russ
Time to invest in a BFH.. ;D ;D ;D
Art
65 Falcon 2DR 200 IL6 with C4.

russosborne

Well, I can't seem to paste the image here, but I was reading my factory manual (thanks Art) and it seems that for the rear bumpers the difference I am seeing IS because mine is a wagon. The rear bumpers mount differently on a wagon vs a sedan/hatchback.

So as long as you don't have a wagon (74 for sure, I don't know about the others) you can do the rear bumper fix.

Russ

reason for editing: I am having a really bad day and nothing is going right.
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

russosborne

the rate my week is going I would end up in the hospital somehow.
I don't have any thing other than my two hands to hold, beat, drill, etc. I don't think I could do it with these. Not enough hands.
thanks,
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

74 PintoWagon

Do you need a press can't you just beat them out?? then just slide it back..
Art
65 Falcon 2DR 200 IL6 with C4.

russosborne

If I had a press that would work. My thought is to have the inners pressed out so I can remove the rubber and then hopefully the inners will just slide in and out so I can get them positioned in the right spot.

My reason for posting the pictures in this thread is just to let those with a 74 know that Bill's mod won't work on their cars, unfortunately. It's a great mod for those cars that it will work on.

Thanks,
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

dick1172762

Put the front bumper shock in a press and make it shorter.
Its better to be a has-been, than a never was.

russosborne

And here are pictures of the 74 front bumper shock. Apparently very different than the 75 and up.
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

russosborne

Just for anyone with a 74, the rear bumper mounts are also different. I just took a look tonight. Sigh.
If I remember, I will try to get some better pictures of the rear setup on mine, but I will have to get it up in the air first. I was pretty much just pointing the camera at the area for these ones, but they should show enough of the difference.
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

JohnW

I think at some point I'm going to make new brackets for my '80 out of steel plate with angle iron where the bumper shock is. I tried to drill out the shocks but I couldn't get it to push in. I still want it to stick out around an inch or so from the body in case I get hit.
-

russosborne

That will be the only way to do this on mine with the stock bumpers, unless I could fabricate something.
Just another thing to think about. It doesn't have to be done anytime soon.
It would probably be easier to just get a small bumper, but easier always equals $.
Thanks,
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

JoeBob

Could you drill new holes in the bracket or frame to allow you to bolt on anyway you see fit?
77 yellow Bobcat hatchback
Deuteronomy 7:9

russosborne

Quote from: joebob on September 25, 2011, 11:56:41 PM

For some reason the mounting frame for the radiator on passenger side was ¼ inch too far forward to allow the bracket to fit properly. A light tap with a sledge hammer moved it back into the correct position. See photo. red tape shows where I hit with the hammer. http://s1124.photobucket.com/albums/l568/bobjoebob/bumper%20fix/?action=view&current=radiatortap.jpg
   

Ok, I was re-looking at this, and just noticed a major difference between Bill's car and mine. The radiator support and forward part of the frame is completely different.  :(

Mine matches what the 74 manual shows(Vol. IV Body page 47-09-02), so there must have been changes over the years.  :-\

Compare my pictures below to his in the above link.  His support has a nice curve to it. Mine is very angular(?), anyway, totally different. So I guess there shouldn't be a surprise that the front bumper mod won't work on my car. I am wondering when Ford changed the support over to the nice one like Bill has? I like curves.  ;D

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

russosborne

Bill, it just took getting bumped at the right time.  ;D

Dan, no, it is the actual bracket that won't clear. Might be able to grind it down some, I haven't looked that hard at it yet.  :-\ I decided to move to another area I have been working on for now until I can come back with a clear head.

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

JoeBob

It is so funny. My post went almost 3 years without anyone making a reply. I could not imagine that this was not interesting to someone. Now 40 replies in just a month, it is so strange. Thank you Clyde for posting photos.

Bill
77 yellow Bobcat hatchback
Deuteronomy 7:9

Clydesdale80

Quote from: russosborne on August 11, 2014, 03:59:09 PM
Well, that was interesting.  ???

I just found out that this mod won't work at all on my car, at least not in the front.  :(
I took the mounts off the bumper so I could work with them, and found out that if I move them back one hole the front of them won't clear the frame. It's not by a lot, but enough. I'd have to measure it to see exactly, but I am thinking much less than one inch. The mounts seem to be totally uncompressed. Both sides are the same way. Everything fit nicely before I took the bumper off.  :-\ :o

I really don't know what is going on. I was thinking maybe it was a wagon thing, but my manual shows the same dimensions for the frame holes for both the sedan and the wagon. I wouldn't imagine that the newer years would be any different there.

Who needs a bumper anyway? ;D

Russ

is it the head of the bottom bumper bolt hitting the rad support?  that bolt has to be move as described in the original post.  otherwise I guess things changed somewhere between 74 and 78.
Bought a 1978 hatchback to be my first car.

Pinto5.0

Wagons look good with a roll pan out back & no bumper to break it up.
'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

dga57

Quote from: russosborne on August 11, 2014, 03:59:09 PM

Who needs a bumper anyway? ;D



I guess that's one way of looking at it!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

russosborne

Well, that was interesting.  ???

I just found out that this mod won't work at all on my car, at least not in the front.  :(
I took the mounts off the bumper so I could work with them, and found out that if I move them back one hole the front of them won't clear the frame. It's not by a lot, but enough. I'd have to measure it to see exactly, but I am thinking much less than one inch. The mounts seem to be totally uncompressed. Both sides are the same way. Everything fit nicely before I took the bumper off.  :-\ :o

I really don't know what is going on. I was thinking maybe it was a wagon thing, but my manual shows the same dimensions for the frame holes for both the sedan and the wagon. I wouldn't imagine that the newer years would be any different there.

Who needs a bumper anyway? ;D

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

russosborne

That would probably be the best way. However my fabbing is limited to what I can do with a hand drill, a hacksaw and/or a grinder.  :-[
And possibly a BFH. ;D

I am thinking that if I remove the reinforcement piece from the bumper that should make the rest light enough so I can modify the mounts if I need to. I wouldn't want to do that with the full weight of the stock setup though. Although to maintain the correct spacing I am wondering if I will have to cut the reinforcement up and use like 4 inches (width) on each mount since fabbing a spacer for me isn't in the cards.

Just going to have to start playing with it I guess. I'm trying to get motivated to go out there right now, but it is a tad warm. ;D

Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.