Mini Classifieds

Wanted 71-73 Pinto grill
Date: 03/09/2019 10:45 pm
t-5 2.3 trans and new flywheel cluch and pressure plate though out bearing for sale
Date: 09/09/2018 03:22 pm
need 1978 pinto guage cluster
Date: 03/07/2021 07:35 am
1977 Cruiser
Date: 06/29/2019 06:28 am
1980 Pinto Parts

Date: 08/05/2020 04:20 pm
Tire needed p185/80r13
Date: 12/31/2017 09:08 pm
'79 4 speed manual shifter needed
Date: 07/30/2018 04:32 pm
Looking for Pinto manual shifter parts
Date: 01/28/2021 03:49 pm
TWM Intake
Date: 08/15/2018 08:20 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,292
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 569
  • Total: 569
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Any 2.0 performance enthusiast.

Started by 72Wagon, January 17, 2009, 07:47:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

72Wagon

 Pintosopher, Thanks I figured their was a down side. I run a Racer Walsh disc with a factory Ford pressure plate it has served me well. This disc is probably 25 years old, the car itself has less then 3000 miles put on it in 23 years. It does get fired up and run a couple of times a year. I got into Harleys and parked the car. I have been reading this site for a couple of years and I am getting the Pinto FEVER back. Hope to put it back on the road this spring.
Kevin
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Pintosopher

Kevin,
Lightening the stock flywheel has limits but a 20% loss of weight should not cause a strength issue IF its done by a real pro, and then re-balanced. Most of the aftermarket flywheels are drilled for both 2.0 & 2.3 engines. Check out the Mini stock sources, Racer Walsh, Esslinger Engineering. Tilton (Big Bucks but very reliable),Centerforce . I was running a 2 disc non-sprung aluminum that weighed half the Stock flywheel & clutch package weight. (14 vs 32 lbs) It caused some problems with the flywheel surface and it turned out to be a major issue because of the lack of a Steel friction ring on the flywheel. Later, went to a Lightened Steel Fly, 2 disc non sprung discs. These don't work on the street, no give in the clutch hub, all or nothing at startup from standstill.

If you've got the low end torque, the flywheel weight is less of an issue for street driving.

Keep tweaking that car, you'll be surprised..

Pintosopher
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

72Wagon

 Just a few questions about lighter flywheels, how much weight loss is needed to make a noticeable difference? Can the stock flywheel be lightened enough to make a difference? If this is a buy one only option, are they still available and from who and at what cost? Last big ? what is the trade off or downside of using one?
Sorry for all the ?'s
Kevin
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Pintosopher

72wagon,
Sounds like your 2 litre is very similar internally to my "mild" racing engine, there's a bunch more punch to be had. My engine short block was a backup to a very strong IMSA RS Pinto that was Dynoe'd at over 165 HP at the crank with a Holley 390. The owner builder said that his car would out drag the Mazda RX2 rotary on the "old "layout  at Laguna Seca Raceway uphill. He said that if the rules had allowed Dual Sidedraft carbs , 175-180 plus was attainable.
My current setup has (2) 40 DCOE with Velocity stacks, for Autocross. It could easily use 45's and keep the throttle response. All out racers use 48 or even 50mm DCOE, but are using real high lift cams and serious compression, and race gas only.
The Light flywheel / clutch makes the engine rev like a superbike and really had me drifting under power at the last hillclimb I ran on Pavement with racing slicks.
Yes, you have more to tap...

Pintosopher
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

Gregg

a lighter flywheel , electric  fan  ,airplane or racing fuel will give it a little more

72Wagon

 I guess I should tell you what has been done to this engine.
Bored .030 over
Flat top pistons
Balanced internals
High volume TRW oil pump
Cylinder head shaved .100
Slight porting to head
High lift Cam (dont know specs off hand)
Adjustable Racer Walsh cam gear
Aluminum Crank pulley (reduced diameter)
Spearco intake
Holley 390cfm carb
Holley electric fuel pump
MSD 6a ignition
75amp alternator (gm 1 wire)
Accel Ignition Coil (yellow super coil)
Headers feeding into 2inch exhaust and Glasspack muffler
Original 4 speed (rebuilt)
8 inch rearend wiith 3:55 gears (have spare center section with 4:11's)
Stainless 5 blade flex fan   

Well thats all I can remember off the top of my head.

I beleive my weak link might be my distributor although it has been rebuilt with new bushings and has not floated the points at 7000+ rpms. The advance curve is stock.
Like I have said it runs good, just think the trottle response could be better, the carb has been rejetted and the secondaries have been set to start opening at 3,000rpm. plugs are burning clean, Fuel economy is good if I keep my foot out of it.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

72Wagon

Quote from: crossy on January 18, 2009, 09:19:07 AM
72 wagon, what brand is the matching valve cover and belt cover? still made? crossy

Crossy, They are M/T branded (Micky Thompson) I do not know who actually manufactured them. I have seen similar ones with out the M/T logo. These things have not been made in 30 years, ocasionaly they come up on ebay. I paid $50 for the pair used 30 years ago.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

crossy

72 wagon, what brand is the matching valve cover and belt cover? still made? crossy
ehh ehhh ehhh FIRE! FIRE!

crossy

you should definitely get rid of the points and maybe a hotter fire coil for those mods you have. I have been slowly collecting parts for mine. the T-5 will be first , but i have the intake, 390, header for it. I want a 450 or so lift cam. I also need to find a 3.50-3.70 punpkin for the 8" I was lucky enough to find. I have many other projects here of all sorts so it's always tough to find time. I basically want a NON-tuner, tuner. I want to spank a few youngins in their Hondas at the track and still have it get reasonable enough fuel mileage that I can drive it to work twice a week.
I just found a cherry set of 4 lug, 13" cragar SS's i put on it and that Inspired me a bit.

I had a BONE STOCK one back in the late 70's that i got to run LOW 16's and ONE high 15 with just careful tuning and tweaking.

I wonder if Pintoracer kept any records of the jetting he had on the Holley 390.
crossy
ehh ehhh ehhh FIRE! FIRE!

72Wagon

 Thanks, it has had a lot done to it, but I am still not sure if my cam timing is set correctly and I am still running a stock distributor so my ignition needs help. I wish I had a dist. tester to set advance curves. Have also thought about switching points to a Pertonics (sp?)set up but not sure if will work with my MSD.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

71pintoracer

Wow! Nice looking 2.0! Looks like you have done quite a bit to it already. I raced 2.0's on dirt for many years and I ran a 2.0 in my 71 for a good while and drag raced it some. I had a basicly stock engine, headers, 390 holley, mallory dist and a motorsport cam. A 50 shot of nitrous had it running 13.40's in the 1/4.
If you don't have time to do it right, when will you have time to do it over?

72Wagon

Looking for some experienced 2.0 performance experts to exchange tips and ideas with. I have started getting my 72 Wagon ready to put back on the road this spring. It has not been on the road since 2002, it does get started and run a mile or two every year and it runs preety good, but I am looking for ways to improve on what I have.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.