Mini Classifieds

1978 pinto grill
Date: 07/24/2018 02:18 pm
Wagon hatch letters
Date: 12/31/2023 04:24 pm
Dumping '80 yellow Pinto

Date: 06/21/2017 03:45 pm
71-73 2.0 4 speed transmission wanted
Date: 09/06/2020 01:57 am
76 pinto sedan sbc/bbc project for sale $1700 obo

Date: 10/27/2018 03:30 pm
I have a 1977 Cobra body lots of parts here
Date: 04/12/2017 06:57 pm
'78 Pinto Windshield Trim
Date: 05/09/2017 10:46 am
Want seals for Pinto wagon "flip out" windows
Date: 08/08/2017 01:44 pm
Want side to side luggage rack rails for '75 Pinto wagon
Date: 08/30/2018 12:59 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 586
  • Total: 586
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Radio installation question

Started by r4pinto, January 01, 2008, 09:36:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

r4pinto

It actually looks similar. I've done the ash tray already so I'll get a pic posted of how it turned out in semi gloss black.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

dave1987

For my stock radio I used some matte clear coat in light coats and it turned out great. How bright does semi-gloss make the paint?

1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

r4pinto

I ended up trimming the opening. It didn't turn out too bad. I'm gonna give the radio trim a fresh coat of semi gloss black then bolt it back in the car.

Thanks for the help guys.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

r4pinto

So you are right. I have the same brochure so I was able to look at it. Only thing I can think of is that the 77 Pinto did not have an am fm 8 track as an option, but only the am fm radio or an am 8 track.

Dunno, still looking at my options before I  cut up the radio trim panel.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

losin sux

Matt, I have a copy of the 77 sales brochure and in that is a pic of the radio.  Aeronutronics is actually silkscreened on the dial.
77 HB 2.3 C3 3.40

r4pinto

Interesting. I'd hate to trim teh bezel, but it looks like that's what I'm gonna have to do. I doubt I'm gonna be able to find an am/fm 8 track made for a Pinto
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

billnall

D5SA-19A168-AD appears to be a t-bird radio. I was looking at the Ford parts catalog and looks like Pinto had radios that were unique to Pinto only. But all the other Fords interchange between each other. So according to that looks like we have special cars.
Ford Parts Man
Bill

r4pinto

Well, I didn't have any problems with depth. The radio was sitting in the dash before, I just don't have a way to fasten it to the dash, or to the radio bezel.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

lugnut

I tried to do this swap a couple of years ago and gave up.  The AM-FM 8 track i had came out of a 78 t-bird.  My Cruising wagon came with the factory AM (only) 8 Track.  Aside from the shaft length issue, the radio with FM too is too deep I believe.  If you look at the sales brochure in 1978, the radio options that they list are AM, AM-FM Stereo, and AM-8 Track.  Like I said, I gave up on it, which is a shame cuz I have a big collection of 8 Track tapes, and several players.  I'm going by memory here, but there was something in the way behind the radio.

r4pinto

The part that shows to the tip is about 2 3/16" long.

Thanks for the compliments on the radio. Not too bad for $10, and it even works.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

TIGGER

As I understand it, the Philco brand was used from 68 till the early to mid 70's.  My 73 sport accent parts car came with a mint Philco AM-FM stereo from the factory.  I have seen the same radio go for big bucks on Ebay.  I have never seen a Philco Radio like yours though, nice find.  The ones I have seen were Aeronutronic Ford.  I pulled a few AM-FM 8-tracks out of some full size Lincolns and Galaxies but I have not paid much mind to the shaft lengths.  I sold my last one early last summer so I am not able to measure it for you.  Just for grins, please post the shaft length of your radio.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

r4pinto

There is an Aeronutronic Ford sticker with a model number. It is

6L-D5SA-19A168-AD.   There's also a Philco-Ford Corporation inspection sticker on it, but the only numbers I see on it are patent numbers.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

billnall

I would think that is the correct one because the part number for am/fm/tape bezel is D6FZ18842B although there are not enough numbers to cross to a part# just going by the D6  B.
Perhaps the radio is a different year are there any labels on the radio with numbers?
Ford Parts Man
Bill

losin sux

I thought that Aeronutronics made the radios for the late 70's model Pinto.  I was pretty stoked to see you found the seldom seen AM/FM 8 track but then I saw it was the Philco version.  With that said the manufacturers difference tween the two might be why yours don't fit.  I will have to keep that in mind as I am still looking for one with a working 8 track.

Steve
77 HB 2.3 C3 3.40

r4pinto

From left to right as they appear on the backside:

D6EF                         18A02     BWA      CAV. 1

The big spaces I put in were present in between the numbers on the back of the bezel.

Thanks for any help you're able to give.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

billnall

There are a total of 5 different radio bezels from 71-80.
Are there any numbers on the bezel?
If so I will try to help you.
Ford Parts Man
Bill

r4pinto

How can I tell the difference on the bezels? When I got it I ws under the impression it was for use with fm tape.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

billnall

There are at least 2 different radio mounting bezels.
1 for radio w/tape player and a diffferent one for without tape.
It looks like the picture on this threat is a non tape bezel.
You have 2 options, cut the center hole larger or get a bezel for a am/fm/tape radio.
Ford Parts Man
Bill

r4pinto

I couldn't really tell you what it came out of since I got it at the Ford swap meet at the Ohio Expo Center November 06. The knobs were fine, it's the shafts that are too short for me to bolt the radio to the front trim plate. Do the shafts actually come in differnt lengths?
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

douglasskemp

Is that 8track out of a Pinto? or just a Ford?

Not all Ford radios are the same.  I found this out the hard way when I went looking for repair parts for the AM pushbutton in my 69 F100.  I tried using a volume knob out of a radio from an Econoline van of the same vintage.  Wouldn't you know it, the knobs are SHORTER by about an inch!  So now I have a couple older E series radios sitting in my dad's shed in AZ and can't use 'em.  I know there are a few Econophiles in here, they would get dibs, but the radios are lost in dusty bliss for now.
The Pinto I had I gave to my brother. The car was originally my mom's, (78 red Pinto sedan with a 2.3 and a 4spd.) I am originally from Tucson, AZ but moved to Oxnard CA :D
I'm looking for a Pinto wagon with an automatic.

dave1987

You could try Ace Hardware, they always have odds and ends like that.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

r4pinto

hmmm... looks like I might just be keeping an eye out for them at the junkyard. It's been a few days since I gone to the junkyard so they might have some older Fords in there.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

crazyhorse

Since Ford went to the single din in about '85 I kinda doubt they still MFG the parts. If you have an OLD Ford dealer nearby, they MIGHT have them as NOS.
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

r4pinto

Hmmm.... I'll see where I might be able to find some countersunk nuts for the radio. Do you know if they might still be available through ford or if they're obsolete?
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

crazyhorse

IIRC ford had some countersunk nuts to attach the radio. In your situation, I'm not too sure what to do, other than try to find these.
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

77turbopinto

You COULD open the hole so the face-plate of the radio comes through the panel. You can use extra washers and nuts to get the best spacing.

Keep in mind that if your radio panel is plastic, DON'T over tighten the nuts.


Bill
Thanks to all U.S. Military members past & present.

r4pinto

I did remove the small piece of aluminum & it made no difference to it.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

r4pinto

Yep, it sure was. I took a couple pics of the trim around the radio.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

dave1987

Is the face of the radio flat against the inside of the bezel? If not and the knobs don't reach, there should be a spacer (small piece of aluminum tubing) between the radio and the bezel which you could trim shorter, or maybe even go without it.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

r4pinto

What if the shafts are too short for the radio trim? The Ford radio I have fits the trim, but the shafts don't stick out enough to thread nuts on. I'll try to get a pic of what I'm trying to refer to.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress