Thanks for the compliments, this is basically what I've done to the suspension,
Tires -BFG Sportcomp2's 195/55-15
Wheels- Mustang 10 hole, 4x4.25", 15x7" (getting these was a big mistake, it took 5/16th spacers and a lot of trimming to clear the wheels from the upper A frames, which are now rubbing again. Looking at 4x4.25", 15x7", 3" back space Aero wheels)
Rear,
Rock Auto-YBKG5514 Gas-A-Just shocks
1" lowering block
Addco #345 Rear sway bar kit
Front,
Rock Auto-YBKG4511 Gas-A-Just shocks
Spring shop cut coils approximately 2", Still didn't look low enough, so I cut another half coil.
Addco #184 Front sway bar kit
5/16" wheel spacers.
I'm not sure what the issue was, but both sway bar kits required a lot of cutting and fabricating to get the sway bars to mount to the front and rear chassis and A frames.