Yep those are good mods , did my first one back in late 80,s to a 80 wagon, same two wire with 2.3 bell, had a good trans guy down the street , back then they did not have any mods because it was still kind of new , but everyone thinking of doing this mod has better going out NOW to pick up on this stuff because it is going to be very hard to find like a pinto in a wrecking yard to get parts from, the A4LD production has ended almost 20 years ago to the computer controlled ones later on , if your thinking of do this to your pinto better grab a few now if you have a place to stash them, pinto parts too, and do not believe the bad stories on the pinto , I hear them all the time, my reply is they were fixed by the recall , on the trans change the fluid every 15K , do not pull in over drive , when pulling a trailer use drive gear only , then make sure you lock up the converter by a adjustment or a bypass switch , (got one on my ranger) and next is the stall speed is higher , now I need a posa unit , bet Rebolting 73 does too when he power brakes and gets up on boost his tires goes up in smoke , I can see his smile from way down here in Mississippi when he does ,