Mini Classifieds

Mint Original Black Rear Seat $275.00

Date: 07/30/2020 11:45 am
Wanted Postal Pinto
Date: 08/30/2021 03:20 pm
1973 Interior parts wanted
Date: 01/02/2017 11:02 pm
1973 Pinto Pangra

Date: 07/08/2019 10:09 pm
Wanted Type 9 5spd Transmission
Date: 07/04/2017 03:26 pm
Seeking reveal molding for driver's door for a 1980 Squire Wagon
Date: 11/08/2020 02:10 pm
'79 Ford Pinto, Green,

Date: 10/29/2019 11:50 am
1976 Pinto

Date: 10/24/2017 02:00 pm
2.3/C-4 torque converter needed
Date: 02/08/2018 02:26 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 1,185
  • Online ever: 1,681 (March 09, 2025, 10:00:10 AM)
Users Online
  • Users: 0
  • Guests: 586
  • Total: 586
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

While we're talking, how about that stock 2.3?

Started by cdg, February 21, 2008, 07:54:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cdg

Racer Walsh - looks like a good parts resource for the 2.3.  I was also on Esslinger's website the other day looking at some cool parts.

I'm really drooling over that dual Webber manifold - the velocity stacks they use in the picture on the website are beautiful.  But that's an expensive setup, and probably not really optimal for drag racing anyway...  It's still beautiful in my mind though.  :D

My idea of drivable is being able to drive it to the closest drag strip and back without needing to trailer the car, or a helmet and earplugs.  Driving it to the drag strip for me that means the drive between Wickenburg and Surprise, which is about a 20 to 30 minute drive in normally very mild traffic.  Or being able to drive into town and back reasonably reliably (about a 10 mile round trip). 

I like the 2bbl suggestion - this summer that will probably be the first mod to go on the car.

69GT

   My idea  would be...  Ported head, bigger cam (roller) and beehive springs if they make em for that head. Full length Headder and exhaust and more compression (9.5:1 or so) A-4LD automatic tranny 3000 or more RPM stall.  8" Pinto rear with 4.11 or 4.30s. Might run 14s. Pretty sure it would with a 5-Speed.  The A-4LD tranny I believe  has a locking converter so if it can be made to work in your carbed non computer Pinto it would not have a problem with the high stall on the freeway. It could probably be done fairly cheap. Less weight always helps. My 72 only weighs 2200 LBS with a full tank.  We put a mildly built A-4LD in my friends SVO and it ran pretty hard.  This is just pondering on my part. A lot depends on your idea of drivable. My friend when he was younger had a 13 second N/A 2.0 Pinto with every mod in the book thrown at it. It was a hand full but he drove it on the street.  Other idea would be get a Turbo coupe shortblock. Do the cheap mods and put a 100 shot of nitrous. Oh and get a 4 hole lower intake manifold off a F.I. late model 2.3 buy the 2 BBL adaptor kit (Racer Walsh) and put on a 350 or 500 CFM 2 BBL carb from the junk yard. They (lower manifold) are great flowing right off the shelf. Hope this gives you some ideas. Except for the year and tranny I have been thinking of doing the same thing to my Pinto. 

High_Horse

QuoteThere is a medical diagnosis for our condition: Academus rejectus statusnosis.
I'm liking this site more every day.


                                                                                     High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

cdg

Thanks for being more understanding.

I pressed new crankshaft seals into my '74 Suzuki in my dorm room.  It came at a huge sacrifice of time, space, and money.  I'm about to do the main bearings in it next.  Then it's on to the Pinto, and God only knows how long that will take.  I read once that the average weekend warrior gearhead spends more than 7 years on his or her project before it ever sees the road or the trail.

Pintosopher

 Greetings cdg,
  I have to agree with Pintony, BUT there's a huge caveat...
  There is a medical diagnosis for our condition: Academus rejectus statusnosis.
  We , no matter what station in life, age, income , of geographic location, demographic or political affiliation, cannot resist the inclination to submit huge amounts of personal energy, money , and even social skills for the purposes of being in an exclusive group of automotive rebels. It started in England and has infected all Ford enthusiasts of European lineage. The Escort/Cortina people are the causal carriers of this condition, and there is no cure.
There have been many variants of this condition, much like a flu virus, but a considerably more pleasant euphoria that may occur, as the disease progresses. Rest assured, there is no mortality issue, just a chronic need to tinker , acquire, sell , and infect other car lovers.

Marriage should be so pleasant...

Welcome, the holy archive is open to your intellectual needs, grab your wrenches, and engage!

Pintosopher
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

High_Horse

cdg,
  I agree with Pintony....finish your schoolwork for now and just keep the pinto in good running condition, out of the elements and out of harms way.

77TurboPinto... :lol:

                                                                                                                         High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

Pintony

Quote from: 77turbopinto on February 21, 2008, 09:41:18 PM
In theory, a stock N/A Pinto with a 2.3 should hit 75mph in the Q-mile (based on stock HP and an overall weight of 2600lbs).

The question is: How fast can it get to that speed?

I too am glad that your Pinto is not a priority. Spend your money on your education that way you will be able to play with Corvettes and Shelbys, not stuck like me settling with Pintos.

Bill

STUCK??
SETTLING??
RRRIIIGGGHHHHTTTT!!!
Yea that is where I want to be....
Oh that is just a Pinto..Pft....
Who has the banning stick??
Somebody said the C-word..... ;D
From Pintony

71HANTO



"Pintos aren't desirable"



Pintos may not be desireable to the Pebble Beach crowd but it sure seems like allot of people are scouring the US and Canada for these little survivors.

Like Yogi Berra said: "No one goes to that restaurant any more because it is always too crowded!" ::)
"Life is a series of close ones...'til the last one"...cfpjr

cdg

Oh come on man, everybody here knows you're more or less joking.

Pintos aren't desirable, but they're fun, and they're kind of rare in most parts of the country.  Given the choice between a Ferrari and an old Toyota HiLux one time in a parking lot, I ran for the HiLux truck.  They're just so uncommon with all the rust issues they had.  There's a Ferrari in every rich neighborhood and at least 50 at every high dollar car show. 

To me, that's what sets a genuine gearhead apart from a pretender.  The true gearhead will have an appreciation for strange and unique automobiles, not just the classics.

Besides, what if I put some snake emblems on my pinto and make the world's first Shelby Pinto, or the Pinto-Cobra.   :lol:  Actually I bet somebody has done that already.

77turbopinto

I wonder how much heat I will get for the aforementioned comment....


Bill
Thanks to all U.S. Military members past & present.

cdg

I will continue to enjoy my Pinto as it is for some time to come, and I think that is some great advice. 

I heard of a guy who had broken his 2.3 on this forum into the 15s with an N/A 2.3.  I wonder who that was...

As for my financial situation, I'm stretched thin now, but I get most of my education paid for on achievement scholarships, and I own 2 other perfectly reliable trucks to get me around when I have to.  :)  And as for Shelbys and Corvettes, I've already driven them, and I like my Pinto.  It's not about having the fastest car on the road, or the sweetest looking ride, but it's rather about having some unique and finely tuned to me.

As for why I'm worn thin financially, it's less to do with my education and more to do with my expensive habits.  I maintain about a thousand other hobbies, ranging from photography, furniture, guns, ghost town hunting, private aviation, guitar, and motorcycles.  I don't drink or party, but all of the above pretty much take all my money anyway so I wouldn't be able to drink if I wanted to.  :)

77turbopinto

In theory, a stock N/A Pinto with a 2.3 should hit 75mph in the Q-mile (based on stock HP and an overall weight of 2600lbs).

The question is: How fast can it get to that speed?

I too am glad that your Pinto is not a priority. Spend your money on your education that way you will be able to play with Corvettes and Shelbys, not stuck like me settling with Pintos.

Bill
Thanks to all U.S. Military members past & present.

Pintony

Hello CDG,
I have to say that just skimming your Post that you will NEVER achieve a streetable
14 sec 2.3 W/O a Turbo. A 14 in a mild turbo 2.3 is a GOOD FAST number...
The 2.3 block is plenty strong.
I prefer the Turbo block as they do not wear at the cylinder walls, but require the use of Electric fuel pump.
Sounds like you need to get some items in your life worked out B4 you get too involved with this project.

My advise is get what you have running as best you can and enjoy the Pinto for what it is. Do not fix what is not broke, or you will be broke $......
From Pintony


cdg

OK, my '80 Pinto is really not a priority in my budget right now.  I need to pay off some college expenses, pick up the main bearings for my '74 Suzuki TS125, and pay off what I owe my dad for buying the paint for the aforementioned motorcycle.  I was thinking about sinking some money into the body of this Pinto, but I'd rather start looking at the engine and drive train first, since the body will be fine with a little sand and rattle can for a while.

So I'm poor basically, and I got my Pinto for $130 (a little less really).  It's got the 2300 with a C4 automatic, but the transmission is probably slowly on its way out.  I'm not a racer, but I think I understand a few things about how to make a car go fast as I worked a good part of my life wrenching on cars.  I'm horribly unfamiliar with Pintos and generally cars of this era.  I'm only 20 years old, so by the time I was working, most of these cars were long off the roads, especially in Pennsylvania where I grew up.

So the 2.3 liter 4 cylinder with a C4 automatic.  I'm not sure what axle or axle ratio is installed, but I suspect it's a pretty tall ratio, as it has no guts accelerating from a stop, but is capable of well over 75 on the freeway (I don't have the guts much past 75 to spurr it to go any faster though).

My goals for this car to start with are:

1) It has to run on pump gas

2) I'm going to leave the slushbox in it

3) Less money is better so long as quality parts are used throughout

4) "Homegrown" is a distinct possibility for some of my own parts.  Plus I really like unique pieces in a project - I think it shows pride in your car when you set it apart from the pack.

5) I'd put a goal at a 14.5 second quarter mile or better, but the car must be capable of cruising at 60-65 mph without feeling like it's on the verge of blowing up.

So a few questions:

1) Pushing a carbed 4 cylinder to its limits - any thoughts on where to start?  Fords are notorious for crummy cylinder heads and intake manifolds from the assembly line.  Could this be a good "port it yourself" project?

2) Valves - I'm guessing that we can go bigger, but would it prove better?

3) Intake manifold- a much bigger carb isn't going to do much for this engine, I suspect, expect at really high RPMs.  But how about a 2bbl adapter?  Can the stock manifold be ported, or is there a great aftermarket solution?  I wonder if side draft motorcycle carbs on a custom intake couldn't be used.

4) I've heard a lot of discussion about the bottom ends on the turbo fords, and how much better they are than the N/A motors, but how can some of this be overcome?  For example, are main girdles available to tighten up the bottom end?  At what point should I be thinking about an aftermarket crank, rods, pistons, and bearings?

5) What about having some machine work done to this engine?  It's reasonably low miles, but perhaps sending the head out to be milled down for higher compression, possibly getting the block decked at the same time...    It has to run on pump gas, but I'm cool with it being premium fuel with octane booster!

6) What about the cost of a stroker setup?  I know that 2500 and 3000 4 cylinders have been found in turbo applications, but anybody hear of N/A applications besides the 2.5 Rangers?

7) What about a mild cam?  This is probably going to warrant a high-stall torque converter and a shift kit.  Or maybe some of those Rhodes or Roads lifters or whatever they call themselves...

8) I've been told on this forum that the internals on the Pinto C4 are not as tough, built for light weight.  Leave the stock innards, or dump them for some heavier metal?  I'm wanting to weigh the pros and cons of having the lighter weight versus the extra strength.

9) I'm not sure which rear axle is in this Pinto, but I"m going to be willing to bet it's the 7" rear.  Is it tough enough to stand up to a modded N/A motor?  The lighter weight might be nice.  Also what about the availability of tougher axle shafts, and ring & pinion sets for the smaller axle?

10) I'm going to guess since I haven't had the hubcaps off that these are 4 bolt hubs.  Any word on some good adapters?  What about leaving the stock wheels and having a professional widen the stock wheels so the car continues to look bone stock?  Power obviously does no good if it can't be put to the ground.

11) I assume there's room to grow with a header.  Any good manufacturers out there?  If not I'm a reasonably good welder, so the only challenge to me would be making my own gaskets. 

These are the bulk of my considerations, things that I'll keep looking for on my own, but that I thought some people here might be able to throw some advice in on.  I'm not looking for a turbo build, just a carbed 4 cylinder.  I was thinking it might be fun to see just how cheaply it could be done, if I collect parts from garage sales and ebay and swap meets and whatnot.  Quality over cost, like I said, but cost will be a factor just the same.

Your advice and opinions are very much welcome here.  :)  This is a huge list, but it's not an obligation to answer these at once.  One decision at one spot is going to affect the subsequent decisions down the line.