Mini Classifieds

1973 Ford Pinto Squire Wagon 3 Door

Date: 07/11/2023 11:39 pm
Pinto 4-spd transmissions
Date: 06/15/2018 09:15 am
1976 Ford Pinto Pony
Date: 09/06/2018 05:40 pm
Floor pans for my 1975 Pinto Sedan
Date: 12/09/2016 08:34 am
2.8 radiator
Date: 10/25/2019 04:10 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/28/2018 09:18 am
'76 Wagon Driver Side Rear Interior Panel
Date: 11/11/2019 04:49 pm
hood for a 79-80
Date: 11/30/2018 10:55 pm
EARLY PINTO CLUTCH PEDAL ASSEMBLY
Date: 02/14/2019 06:27 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 567
  • Total: 567
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

4spd shifter

Started by wedge446, January 06, 2008, 03:03:23 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Blacksheep22

Well, You know how us Junkyard / Racecar drivers are....... Another quick "Temporary" Fix I do is to take electrical tape and wrap the !@#$%^&U out of it! (the small boot that is)  :lol: Hey it works, what can I say!
71 Pinto Mini-Stock 1994 Track Champion
72 Pinto all original 63000
73 Pinto Wagon 2.0  4 Speed 8inch

dave1987

Very true. I think it would be nice having the arched shaft from the MII though.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

TIGGER

Quote from: dave1987 on March 09, 2008, 03:42:38 AM
The Mustang II shifter has this spring mod already on it. I will try and post a picture tomorrow.

I've been trying to figure a way to disassemble it so I can put the threaded retainer on it instead of the MII's bolt down retainer, but have had no luck so far.

Yeah I know, I have about four of them at my storage place.  I brought one home this week to take a look at.  It looked like more work than doing Pintony's mod so I bagged it.  It took about 15 min to modify the shifter with a $1.19 spring.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

Srt

Quote from: Pintony on January 20, 2008, 11:07:09 AM
\ So Dave,
do you have any fingers left after tring to reach down a drain hole and spin a
razor sharp chinese throwing star into an impossible "blind" fine thread socket??? ;D
From Pintony

:lol: laughed my a$$ of at that one!!  Boy did you hit the nail on the head.
the only substitute for cubic inches is BOOST!!!

dave1987

The Mustang II shifter has this spring mod already on it. I will try and post a picture tomorrow.

I've been trying to figure a way to disassemble it so I can put the threaded retainer on it instead of the MII's bolt down retainer, but have had no luck so far.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

TIGGER

Pintony, I did your spring mod on my 72 beater today.  It made a big difference.  Thanks! and 1 up for you ;D
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

dave1987

Hahaha. I know exactly what you mean. I got fed up with it and ended up getting the Craftsman heavy duty mechanic's gloves I remembered I had in my trunk. Thank the lord I had them or I probably would have my fingers wrapped in gauze right now.  :lol:
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Pintony

Quote from: dave1987 on January 20, 2008, 02:00:33 AM
So I experienced this "shifter pulling out" thing that a few of you have had. My shifter came out of the tranny tonight while shifting into second. It remained in the boot but the threaded screw down retainer that holds it to the tranny came out. I forgot to push down the tabs that keep it from turning counter-clockwise. It's all better now though. :)

\ So Dave,
do you have any fingers left after tring to reach down a drain hole and spin a
razor sharp chinese throwing star into an impossible "blind" fine thread socket??? ;D
From Pintony

dave1987

So I experienced this "shifter pulling out" thing that a few of you have had. My shifter came out of the tranny tonight while shifting into second. It remained in the boot but the threaded screw down retainer that holds it to the tranny came out. I forgot to push down the tabs that keep it from turning counter-clockwise. It's all better now though. :)
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Scott Hamilton

Tony. YES.. that is it..

Cool.. Shifter stop.. what is that?  And more importantly how does one put it back?  Can I assume that it must be utilized with the push down reverse in some way soooo I need to 'farkle' around and try to see how this fits back in there with the original shifter.. then I can try with the replacement...

Shifter stop... maybe restricting the shifter from moving in one specific direction?

It came out on me when I tried to install the new shifter, only then (after it was out of the transmission) did I know it even existed...

Thanks Tony...
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

Pintony

Hello Dave,
The ring is spring steel so I do not think you could bend it out of stock material.
If you come to the Tulsa meet or the Knottsberry meet I will bring you one.
From Pintony

dave1987

I do have the plastic bushing but not the ring clip in the photo. What is the diameter of the rod and how hard would it be to fabricate this form a stainless steel rod?
Our beverage bar drink grates have 1/8" stainless rods that break off from time to time from age. If one comes off again soon I may take it home and attempt a fabrication of this part.
If you could get me the diameter of the rod, the diameter of the circle in the photo, the distance from the straightened part and the begining of the circle and the distance of each straight part before the bends I could possible make something for us with 4 speed trannys that do no have this.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Pintony

Here is a Photo if the shifter saddle that makes the shifter feel less sloppy and the shifter stop..
Hope this helps the members here???
From Pintony

dave1987

So what exactly is it's purpose?I do not see it on my 78 and may go on a hunt to find one.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Pintony

UPDATE!!!!
  The ring that Scott mentioned is listed in the "BIG BLUE BOOK" as a shifter STOP.
part 7E444




dave1987

Could you post a picture of this ring? It might be on my 79 shifter.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Pintony

Hello Scott,
I have the ring NOS and I know where it goes but as to it's functon??? I'm not sure.
Actually I just figured out how the reverse lock-out works last night....
I'm sure it just drops in the hole where the shifter goes. Maybe it is there to center the shifter or to keep it from shaking while in neutral???
From Pintony

Scott Hamilton

I guess I need to post pictures but it looks like the forks just needs ground down (height) about 1/4 inch or less and more of a pronounced notch needs to be added to allow for the reverse push down and over.. It almost works just as it is..

I have another question...

I pulled the stock shifter from my mustard runabout and there is a round clip or ring that fits inside the transmission after you take the shifter out...  In all the Pintos O I have played with I don't remember this... My green runabout does not have this nor does a rebuilt trans I have on the shelf...

The really bad thing is that this clip is now not in the trans housing correctly & I don't know how to get it back where it was...

What is it?
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

Pintony

Hey Scott,
Yes that is a serious COOL shifter.
My parts cost less than 2 bucks.
In what way do you have to modify the R. W. shifter to make it work???
From Pintony

Scott Hamilton

Has anyone tried this..

http://racerwalsh.zoovy.com/product/RWA3144/Pinto_shifter_Racer_Walsh.html

I ordered one and it looks like if a little metal work is done on the forks it will work...
It screws right down in the trans perfectly and has it's own spring built in...

Just needs slight work on the forks to make them match up to the original Pinto shifter.. (71-73)...

I'm not the expert so... what say you?
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

wedge446

I understand now.. Thanks
I was lucky, my spring boot is still in one peice.. I took a washer to use a a shim between the E clip and the rubber boot/spring as a temp. fix until I find a spring like you have.
Thanks for the info.
With a cutting torch and welded anything will fit.

Pintony

Quote from: Original74 on January 11, 2008, 09:22:30 PM
Tony,

Did you put the boot back on just to keep grease in and dirt out?

Dave

Hello Dave,
Yes the original Pinto shifter boot is only keeping the dirt out of the shifter now.
From Pintony

Original74

Tony,

Did you put the boot back on just to keep grease in and dirt out?

Dave
Dave Herbeck- Missing from us... He will always be with us

1974 Sedan, 'Geraldine', 45,000 miles, orange and white, show car.
1976 Runabout, project.
1979 Sedan, 'Jade', 429 miles, show car, really needs to be in a museum. I am building him one!
1979 Runabout, light blue, 39,000 miles, daily driver

Pintony

Hello Wedge 446,
When the shifter is NEW the rubber boot >"is"< the spring I added.
I added the spring to hold tension between the cup and the C-clip, so the reverse lockout would work as it did when the boot was new.

The rubber boot is the only thing that holds the ball in the socket.
Originally the boot is taller than the distance between the cup and the C-clip.
Without this tension the shifter will feel real sloppy in your hand and while shifting from 2nd to 1st geat there is "NO GATE" and the shifter slips into the reverse gear slot.

After 30 years the boot is decayed. The boot in my posts is so bad it has collapsed between 1 of the bellows and is now in 2 pieces no longer holding the shifter UP.
When the Pinto is NEW you have to "POP" the shifter down-ward with the palm of your hand to get into reverse.
Tomorrow I will buy another spring and put something in the photo to help add scale to the photo+ measurements of the spring I used.
From Pintony

crazyhorse

The shifter in my '80 came out on me a couple times. The second time, it stripped the nylon threads. Both times going into 3rd. My knuckles haven't been the same since!
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

wedge446

I`m going to try the mod... Where did you find the spring you used? got any mesurements of the spring?

Also, what is the idea of using the spring.. I`m assumning it pushes up on the shifter. Is there something inside the pivot point of the shifter that waresout ?

I`m not questioning your mod, I just like to understand how things work.
With a cutting torch and welded anything will fit.

dave1987

Last summer I went to the pick and pull and found an old shifter in a 79 Sedan, still had a good boot on it and everything. I brought it home and put it in, just because it had a better boot on it.

I had no idea that the Pintos had this reverse lockout on it. I pulled out my old shifter (I keep everything that was original on the car) and took a look at it. Sure enough, the C-clip that holds the boot down had slid up the shaft. So I put the old clip on and I can now see exactly how this reverse lockout feature works.

I just got done fixing the shifter in the car (same problem, loose c-clip) and my gosh what a difference. To bad I can't rest my hand to the left and light up my backup lights while driving down the freeway now. ;)

But really, this should definitely change the way I drive the car!

I would still love to see what pintony has in store for this fix, and will probably end up getting a "fix kit" from him to
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Pintony

Then I used zip-ties to hold the boot I cut the slice in..
The shifter now should act as it did when new and the reverse lockout "GATE" should be restored...

Pintony

I bought a spring just bigger than the dia. of the shifter shaft and opened up one end to fit into the cup, then wound it around the shifter,
Then replaced the C-clip. +
Added a generous amount of grease...

Pintony

Hello Group,
Here is the shift improver that I am working on.
First remove the big C-clip and cut the boot off the shifter.
As you can se the boot is broken into 2 pieces.
The boot is what keeps the shifter from jumping into reverse all the time.
The boot may not be broke like this one but is weak from age.


Thanks Dave for helping with my sepllung ;D