Mini Classifieds

Weiand Single plane manifold - for 72 Pinto 4 barrel Carb
Date: 04/25/2017 12:17 pm
1978 ford pinto door striker (passenger side)
Date: 09/01/2017 11:58 am
Bellhousing for C4 to 2.0 litre pinto
Date: 01/30/2017 01:48 pm
1973 Pinto Runabout

Date: 03/25/2019 09:02 pm
WTB: Ford Type 9 5 speed Transmission
Date: 06/28/2019 09:14 pm
77-78 front grill
Date: 04/07/2017 12:35 am
1977 Left Side quarter panel
Date: 06/10/2019 04:16 pm
72 pinto

Date: 06/23/2016 12:40 pm
4-14" Chrome Plated Wheels 4 x 108 + 0mm offset with new tires

Date: 09/12/2018 12:33 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,895
  • Latest: tdok
Stats
  • Total Posts: 139,581
  • Total Topics: 16,270
  • Online today: 261
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 204
  • Total: 204
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Help with 2.0 Crankshaft Pulley

Started by 1972 Wagon, January 24, 2020, 09:44:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dga57

Quote from: LongTimeFordMan on January 29, 2020, 11:54:45 AM
I was at the party in 2016

Also did the 2017 and 2018

Missed 2019 but planning on the 2020

I was the. guy riding around on the red mobility scooter at carlisle

My car is the red 73 wagon with the black.stripes

I also did the tee shirts and buttons for 2017, and 2018

Well then, I most certainly must have met you.  I'm pretty sure I made contact with all the attendees of the pizza party at some point that evening; or at least I tried to!  The weather really interfered with my plan there, but all things considered, it still went fairly well.  It was arranged to be an opportunity to show off the Pintos but the rain kept spectators from showing up.  Roger Aldheizer (the Sales Director there) did record an interview with Norm and post it on the dealership's website, so that was decent publicity for the Ford folks in the area to see and, while I provided the pizzas, drinks, and cake, it was he who made the dealership facilities available for the party.  Before we hit the road the next morning, I was in the motel parking lot trying to see to it that all the participants got a PCCA magnet but I'm sure there were a few folks I missed (if you didn't get one, PM me and I'll send you one).  Once we got to Carlisle, I really didn't hang around long.  The weather was lousy there too so I headed homeward after a couple hours.  My wife is severely handicapped from a stroke and, while I left her in good hands, I wanted to get on back home as soon as possible.  I already knew Norm, Louise, and Bev from the 2011 Stampede and I just couldn't let the 2016 Stampede have a stopover in my town without getting involved with it in some small way.

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

1972 Wagon

Monday I dropped off the suggestions everyone gave to my mechanic Russ. Since my Pinto is in the "project car" category, Russ works on it when his regular repairs are done. Due to its age, Russ let's his crew do things like the oil changes, but only he and Charlie work on the engine. That way if anything goes wrong, Russ knows who is responsible! I'll post when Russ gives me an update.
*The Original Family Car: A 1972 Pinto Wagon*
Ordered by my folks from Bunnell Motor Company, Inc., Bunnell, Florida
Delivered: June 20, 1972
Entrusted to my care: August 1976

LongTimeFordMan

I was at the party in 2016

Also did the 2017 and 2018

Missed 2019 but planning on the 2020

I was the. guy riding around on the red mobility scooter at carlisle

My car is the red 73 wagon with the black.stripes

I also did the tee shirts and buttons for 2017, and 2018
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

71pintoracer





How many revs do you think the stock rods would handle?

The car only has 70k miles and i have the original engine stored for the grandkids. Just wanted a rebuild to drive around so i woulnd
have you been to any of the stampedes.i did the 2016 to.carlisle, the 2017 to dearborne.and the 2018 thru the smokies. Maybe we have met

The stock rods will easily handle 7k. l haven't made any of the stampedes.
If you don't have time to do it right, when will you have time to do it over?

dga57

Quote from: LongTimeFordMan on January 25, 2020, 05:58:37 PM

have you been to any of the stampedes.i did the 2016 to.carlisle, the 2017 to dearborne.and the 2018 thru the smokies. Maybe we have met

Not to butt in here, but you say you did the 2016 Stampede to Carlisle?  Did you participate in the pizza party at the Ford dealership on the last night before driving the final leg to Carlisle?  I hosted that event which, despite the miserable weather, was well received.  My Pinto wasn't up to the trip at that point, but I met up with the gang the next morning at the motel and joined in for the trek to Carlisle anyway, bringing up the rear, driving my red 2015 Mustang convertible.  Jimmy wasn't there for any of that, but it's highly likely that WE have met.  Small world!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

LongTimeFordMan

Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

LongTimeFordMan

Well tbis is a fresh rebuild .060 over bore, forged pistons, stock cam advanced about 8 devrees, head cut .040.stock rods.

I wanted low end torque for cruising so 6000 rpm.is plenth for me. With this setup it starts making power about 2000 and easily revs to 6000.

How many revs do you think the stock rods would handle?

The car only has 70k miles and i have the original engine stored for the grandkids. Just wanted a rebuild to drive around so i woulnd use up the original.

have you been to any of the stampedes.i did the 2016 to.carlisle, the 2017 to dearborne.and the 2018 thru the smokies. Maybe we have met
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

71pintoracer

Very Nice! Looks really good! 6000 rpm is nothing for these little engines, they will go 7k without a whimper in stock form, with a little bit of tuning, which you have for sure. Cam timing is critical to get these engines to run good.
If you don't have time to do it right, when will you have time to do it over?

LongTimeFordMan

71pintoracer..
Not to change the thread but just thought you might want to see my  ustom manifold.for 2 SU HIF4 carbs from a 72 mgb. Setup improved performance drastically over the stock weber.
With stock cam, pertronix and the carbs engine spun easily to 6000.Havent wanted to run it farther.

Salvaged plenum tubing from a directv antenna mount and made runners from 1 3/8"
Thinwall conduit
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

LongTimeFordMan

Also as 71 pintoracer wrote you can adjust the ignition timing by ear.

BUT you cant really set the cam timing "by ear" without an adjustable cam pulley.

The only option without the adjustale pulley is to move the belt one or more cogs forward or back and this is WAAAYY to much for the engine to even run.

One cog is about 18 degrees and you need to adjust to about 3-8 degrees and then need to stop the engine and remove the belt.

With the adjustabke pulley you loosen the adjustment screws, turn th3 crankshaft a bit and retighten.
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

LongTimeFordMan

Are you describing the timing belt pulleys. And what do you mean by "too high".

Do you mean too thick so that it rubs on the cover or too large in diameter.

There are 3 timing belt pulleys on a 2.0.

A small one on the crankshaft, the one on the camshaft and one on the au,ilary shaft on the driver side of the engine.

The cam pulley and auxiliary pulleys are the same so if one fit the other should as well.

HOWEVER it is possible to put the pulleys on backwards, that is facing the wrong way.

This not only affects the timing but as well can interfere with the belt cover..

Here are some pix of the pulleys.  They are identical but showing both sides.

Note the balance "bumps" on one side on the blue one

If installed properly the auxiliary shaft pulley should have the bumps facing inward as in the brown pulley.

The cam pulley should be installed with th bumps facing forward like the blue pulley

Its also.possible to not install the belt cover and if you have an adjustable cam pulley its probably more convenient without the  over if you want to experiment with the cam timing.

It also looks.cool...

The 2.0 is a "non interference engine" meaning that if the camshaft belt breaks and the cam stops but the pistons dont there is enough clearance between the open valves and the pistons to prevent damage.

Normally the valve timing prevents the valves and pistons from colliding.

Not sure how much you can actually skim off a head without the danger of having the valves hit the pistons,

I suspect that .060 might be the max but perhaps 71PintoRacer has an idea.

It is also poss8ble to measure the thickness of the head to find out how much it has been machined

If your mechanic needs assistance i can pm you my phone number so that he can call
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

1972 Wagon

I have limited mechanical ability so I probably am not explaining it very well. In 1995 the head was planed twice. When the block was reassembled the top timing pulley was too high. The mechanic switched the two timing pulleys because one was smaller and cleared. That's the best that my husband and I can recall. Since then, the car has been lightly driven and always ran fine. The past 4 years, Russ, our mechanic, and i have been working to gradually address various age related issues and the timing belt was at  the top of the list for this year. That work led to the discovery of the small leak in the head gasket. Again, I appreciate all the help to keep my Pinto on the road. We live in a small, rural community and everyone knows who drives the Pinto!
*The Original Family Car: A 1972 Pinto Wagon*
Ordered by my folks from Bunnell Motor Company, Inc., Bunnell, Florida
Delivered: June 20, 1972
Entrusted to my care: August 1976

71pintoracer

LTFM the Mallory is all electronic and has 24* of advance, so at 10* initial you get a total of 34*. lt always worked well for me.
72 Wagon l'm a little confused about "they had to change two of the timing pulleys." And cam timing and ignition timing are totally different. l have "tuned" timing by ear lol but a mark at TDC and an advance style timing light are all you need.
l have 3 stock heads and 1 complete that has been cut .060" with a Motorsport Racing cam.
If you don't have time to do it right, when will you have time to do it over?

1972 Wagon

Thanks for the suggestions. Monday I will pass along the tips to my mechanic. I doubt the head can be resurfaced. When the engine was rebuilt in the mid 90's, the head was planed and a casting defect was exposed so it had to be done again. As a result the head was a bit low and two of the timing pulleys had to be switched. In all these years it has never caused a problem. My current mechanic knows the timing marks can't be used and times it by "ear." The shop I use has an excellent reputation and over the last 4 years they have taken good care of my Pinto. They know my dad was the Pinto's original owner and that I will always keep it. Thanks again for your help. I really appreciate it.
*The Original Family Car: A 1972 Pinto Wagon*
Ordered by my folks from Bunnell Motor Company, Inc., Bunnell, Florida
Delivered: June 20, 1972
Entrusted to my care: August 1976

LongTimeFordMan

71 pinto racer,

Is the advance curve adjustable on  the mallory unilite.

I reworked my factory distributor to have 16 degrees centrifugal advance starting at about 2000 rpm.

locked down the breaker plate and removed the vacuum advance and set the initial timing at about 14 degrees  to get about 30 total.

That helped a lot as well.
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

LongTimeFordMan

I second the lrevious post

Ford retarded the cams in all their engjnes in the 70s so advancing is a must.

But i have had both an alloy cam pulley and a steel one.

For street use the alloy one wore out in about 5000 miles, dont know why.

So i switched to a steel and it really made the car come alive.

Take 71 pintoracer up on the parts he has and you will be surprized at how much better yiur car will run.
Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

71pintoracer

l have 2 used adjustable cam pulleys, $50 ea. 2 small performance aluminum crank pulleys, $30 ea. and a Mallory Unilite distributor w/ cap, rotor, wires and a spare module, $75. + shipping.
The best thing you can do to ANY 4cyl Pinto engine is set the cam timing. They were typically 2-4 degrees retarded from the factory so when you surface the head .040" you end up 8 degrees retarded and it runs like a slug. Advance that puppy 2-4* ATDC and you won't believe the difference!
If you don't have time to do it right, when will you have time to do it over?

LongTimeFordMan

As far as getting a new head, if yours isnt  cracked and you are doing a valve job just keep the one you have. They are getting pretty scarce

Just have a valve job done and have hardened seats installed

Having one that has been machined before can be a good thing and it can actually provide better performance.

A 2.0 head can easily be machined .040 and will provide better compression, about 9.0:1 vs the original 8.1:1

Every .040 inch machining will raise compression about 1 point

The 1971 pintos had 9:1 compreszion and made 100 hp in 72 and 73 they reduced the compression to 8.1:1 and the horsepower dropped to 87.

I cut mine .040 and can still run 87 octane with no problems

BUT as in previous posts machining the head will affect the length of the cam to crankshaft pulleys and make it difficult to get the camshaft timing correct

An adjustable cam pulley is about $120 and a really good investment to optomize the cam timing.

https://www.burtonpower.com/kent-cams-adjustable-steel-cam-pulley-ford-sohc-pinto-ft310a.html

Racer Walsh can get it for you

Also again consider a pertronix ign module about $125

https://www.amazon.com/PerTronix-91847A-Adaptive-Aftermarket-Distributor/dp/B000N2U5TG

Pinto uses a bosch distributor similar tk the volkswagon

They fit into the distributor and replace the ign points

Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

LongTimeFordMan

The pulley should come off pretty easily.

Someone here should have some spares.

if not try Racer Walsh
904 721 2289 or
904 721 3177
And ask for Brian he is one of the few sources left and is in florida

Also, before you remove the belt have the mechanic mark the camshaft pulley to make setting the cam timing easier.

There are marks on the pulley backing plate and head but they arent accurate andnit is possible to get the cam timig a tooth off either advanced or retarded.

Heres a pic of how i did mine.

I turned the engine until the top dead  center "0"  timing mark on the crankshaft pulley aligned with the pointer on the engine block.

I then used a hacksaw to cut a small notch in the sheet metal backing plate behind the cam pulley that aligned with the center rib on the cam cover.

That way its pretty easy to realign the cam and crankshaft by lining up the notch with the rib in the cam cover.

Also make sure that the rotor in the distributor is pointing at the small.hash mark in the distributor indicating cyllender no.1.

You might also consider installing an adjustable cam pulley to.advance the cam about 4 to 6 degrees.

This will improve the low end performance quite a bit and if your cyllender bead has been machined during a valve job the cam timing may be affected

An adjustable cam pulley wi.allow for optomizing the cam timing

Racer Walsh can get one for you, just request a STEEL one not an alloy

If you decide to.install the adjustable pulley i can provide you with some useful info as to how tk advance the camshaft.

Also a pertronix electronic ignition will improve performance and reliability.

I posted a post here about how to do it.

First Photo shows notch in pulley aligned with rib.

Second photo shows detail.of notch.

BUT note that in the second the notch is NOT aligned to.factory setting but with camshaft advanced about 7 degrees.

In factiry setting the notch should be exactly aligned with senter rib.

Red 1973 pinto wagon DD, SoCal desert car, Factory 4 speed, 3.40 gears, Stock engine, 14" rims and tires, 60 K original miles

1972 Wagon

The head gasket on my 1972 2.0 wagon started to leak and it's time to replace the timing belt. My mechanic is having trouble removing the crankshaft pulley and is concerned that he might damage it. Before he proceeds further, he wanted me to ask if there is a source for a replacement pulley. He also wanted to know if there are any tips to remove the pulley. As the head was resurfaced in the mid 90's, he also wants to know if there is a source for a new one. He is trying to prepare for a "worst case scenario." Any help/ suggestions would be appreciated. Thanks!
*The Original Family Car: A 1972 Pinto Wagon*
Ordered by my folks from Bunnell Motor Company, Inc., Bunnell, Florida
Delivered: June 20, 1972
Entrusted to my care: August 1976