Mini Classifieds

Looking for front seats
Date: 08/10/2021 09:54 pm
Parting out 77 Bobcat Hatch
Date: 11/06/2017 04:16 pm
1978 Squire wagon 6 Cly
Date: 02/16/2020 05:42 pm
Misc. Pinto parts

Date: 11/09/2019 04:25 pm
71,72 Pinto Door Panels

Date: 06/17/2018 08:27 pm
1980 Pinto for sale

Date: 11/24/2016 06:32 pm
Clutch pedal needed
Date: 01/11/2024 06:31 am
1971-1975 Pinto
Date: 01/09/2017 04:14 pm
Wheels and Parts

Date: 07/06/2018 04:50 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,577
  • Total Topics: 16,269
  • Online today: 1,090
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 74
  • Total: 74
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Hey, Look! It's..........

Started by pintogirl, August 22, 2011, 07:00:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blupinto

I said dipstick, not dipsh.... ahh never mind! lol

How are you Dick? Are you busy racking up notoriety with the state troopers and that lead foot of yours? You know the U.S. Mail isn't delivered by Pony Express, right!? lol Hope you are doing well. I wanna relive that trip SOOOO bad! ;D
One can never have too many Pintos!

postalpony

blupinto  Who are you callin' a dipstick???   I resemble that
remark, lest your memory has faded..



    My best to you, Becky  hope all is swingin' your way!!

                           Postalpony
1980 Hatchback was a "Postal Unit" on the
west coast in it's early life. Now residing
in Ohio, But we don't haul the U.S. Mail anymore;
Now all we do is HAUL!
5th gear 4700 rpm & still pullin'= 113+  mph

UPDATE-83.762 mph in 4th gear As verified by a W Va State Trooper-WITH 1 GEAR TO GO 6-2-11

blupinto

To add to what Starliner said, it never hurts to periodically check that dipstick (unless the engine's hot. Ouch! lol).  :hypno:

One can never have too many Pintos!

Starliner

That is one beautiful wagon!   

I would definitely invest in a temperature gauge to protect your investment.
The temperature gauge is really the only gauge you need.  Then you can monitor the day to day temperature range to understand where it normally operates.   Then if it starts running cooler or hotter from the norm then you can check things BEFORE you have a problem.

For oil, an idiot light is good enough.  Typically you either have oil pressure or not.  The standard idiot light will take care of that.

1973 Pinto 1600 - Sold!  
1979 Pinto 2300 - Sold!
1984 Audi 5000 Avant - 60,000 original miles
1987 Audi 5000 S Quattro - The snowmobile
1973 Volvo 1800 ES wagon -  my project car
1976 Mustang II - Wifey's new toy

dave1987

Its your ignition switch. My 73 wagon was doing that same thing with the key. There is a tiny ball bearing inside the switch that gives you the "click" into each position. Sounds like it fell out.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

pintogirl

Quote from: blupinto on August 25, 2011, 06:25:52 PM
Hey! I had dibs on her! lol

You must have a different Car Quest than me... so far the one here in Oceanside has had NOTHING for my '71... not even an air filter. >:(

LOL, yah, you still have first dibs on her! :D  Right now she isn't going anywhere, literally! LOL  ;D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

blupinto

Hey! I had dibs on her! lol

You must have a different Car Quest than me... so far the one here in Oceanside has had NOTHING for my '71... not even an air filter. >:(
One can never have too many Pintos!

pintogirl

Quote from: TIGGER on August 23, 2011, 10:03:01 PM
The part that turns the key is connected to a metal rod that is on top of the column.  When you turn the key that rod moves up and down activating the switch that is mounted to the bottom of the column.  If your key goes in and out and turns the cylinder ok then it is fine, you do not need to change it. 

I had the same problem with my 73 turbo car about 5 years ago, I had to fiddle with the key to get the ignition to work. I tried to adjust it first but I ended up making it worse.  A new one fixed it.  I got it thru Napa but you can get NOS ones on Ebay fairly reasonable as well.

I think the problem is in the cylinder the key goes into. I can turn it and almost leave it in any spot I want, instead of it automatically going back to the correct "run" spot.


I have been doing pretty good going to Carquest for my parts. Nellie is on the back burner for now as far as getting her brakes fixed. I am kind of spending money I don't have on another project right now!  ;) 

Matt, I will donate her to you for a small fee! LOL :showback:  ;D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

r4pinto

Or you could just save yourself the hassle & donate the car to me  ;D
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

dave1987

I was able to get my master brake cylinder from O'Reilly's. I got my brake cylinders, hoses, pads, shoes and hardware all from RockAuto.com, but only because I was placing a mass order from them anyway. I know that O'Reilly's can get me new brake shoes for Brownie (73 Wagon) shipped in from Salt Lake for $18-ish.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

old 1973

Totally understand the brake situation,I replaced rotors new pads completely rebuilt rear drum brakes this year,I picked up replacement trim from another club member out of Detroit michigan. Now waiting for funds to build back up so I can get my trim re-wrapped and the woodgrain tape done. About ur brakes I ended up getting most of my parts from oreillys auto parts, and a few pieces fromautozone.
My rides: 1972 Squire wagon (Kermit)#121
               1973 Squire wagon (Penny) #120
                1975 Mpg sedan (Pumpkin) # 122
                 1978 cruiser wagon (casper)

TIGGER

Quote from: pintogirl on August 23, 2011, 07:10:33 PM
Oh, I figured since I had to play with the part that the key went into, I would have to replace that. Maybe I am talking about a different part and don't know the correct name for it. I am talking about having to replace the part that turns with the key. It has to be moved to just the right spot and then I can get gas gauge. So it is not really going back to where it should for the "run" position. That and I have to find the sweet spot just to get the car to turn over. 

The part that turns the key is connected to a metal rod that is on top of the column.  When you turn the key that rod moves up and down activating the switch that is mounted to the bottom of the column.  If your key goes in and out and turns the cylinder ok then it is fine, you do not need to change it. 

I had the same problem with my 73 turbo car about 5 years ago, I had to fiddle with the key to get the ignition to work. I tried to adjust it first but I ended up making it worse.  A new one fixed it.  I got it thru Napa but you can get NOS ones on Ebay fairly reasonable as well.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

pintogirl

Quote from: blink77 on August 23, 2011, 03:02:08 PM
The ignition switch has nothing to do with the key.
It is mounted on top of the steering column under the
instrument panel. You have to loosen the column up
to get at it. When you change it , it will still be original
as it would be if you changed spark plugs.
Bill

Oh, I figured since I had to play with the part that the key went into, I would have to replace that. Maybe I am talking about a different part and don't know the correct name for it. I am talking about having to replace the part that turns with the key. It has to be moved to just the right spot and then I can get gas gauge. So it is not really going back to where it should for the "run" position. That and I have to find the sweet spot just to get the car to turn over.


Thanks old 1973. This one has a little over 44k on it. The inside is like new. The outside has some minor damage. The guy that sold it to me ( a car show guy) told me it would be considered an 8 as show standards go. I really am happy with her! People probably think she has ratty seats because I keep covers of them and also put a blanket over the back seats. I am just trying to keep the sun off of them! LOL


Oh, another problem I found on my way home. She seems to have a brake issue. It was pretty scary when I figured out that something was wrong! Her brakes kind of pulsated till she finally came to a stop. I thought I was going to have to grab the e brake. Then after that, the pedal would slowly lose its pressure as I sat at the light. I'm thinking she will need a new master cylinder along with a brake inspection all around!
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

old 1973

Gorgeous squire! I have a 73 that I'm restoring it only has 63k orig miles on it it is an on going project.
My rides: 1972 Squire wagon (Kermit)#121
               1973 Squire wagon (Penny) #120
                1975 Mpg sedan (Pumpkin) # 122
                 1978 cruiser wagon (casper)

blink77

The ignition switch has nothing to do with the key.
It is mounted on top of the steering column under the
instrument panel. You have to loosen the column up
to get at it. When you change it , it will still be original
as it would be if you changed spark plugs.
Bill

pintogirl

No Becky, I haven't done anything with her radiator. Funny thing is, is it doesn't smell like radiator hot, more like burning oil hot. She doesn't smoke or burn oil though.

Well, she is parked again. She is having electrical issues. They are being caused by a possibley failing ignition switch. She was fine last night when I parked her. Started driving her this morning and noticed she was now on E insted of being on F like she was last night. ( gas gauge, if you didn't catch on, lol) So not really remembering how much gas she had, I headed to a gas station. She didn't take but a couple dollars. When I went to start her again, I got nothing. Had to play with the ignition and finally she started. Now she has a fuel gauge, but her alternator light is on. Again, played with the switch and the light went out. After work she had no gauge again, but I didn't mess with her do to the light was at least off for the alternator. I then noticed she had no blinkers! Ugghh. I don't know if she had brake lights or not on the way home. I know she had them on the way to work, it was dark so I could see them lighting up signs and such behind me.

So needless to say, she is now parked again.

Wonder if one can rebuild an ignition? I really don't want to get a new one because she is all original. I guess I could get a new one and have it re keyed to fit my keys?

That is a project for another day. To many other ones going on right now. At least it will be a somewhat easy fix! :D 
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

dga57

Quote from: pintogirl on August 22, 2011, 07:00:36 PM
I haven't started a post in a while, so what better to talk about but Nellie Belle! LOL

I agree 100% Kim!  She's a real beauty!!!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

blupinto

Kimmy, I'm glad you've been re-bitten by the Pinto Bug... I was a little worried there for a minute... ;)

I know I'm preaching to the choir here, but did you get her radiator flushed/rodded? It's one of the best things you can do for Nellie Belle. I am SO glad I got Ruby RedHot's radiator fixed and rodded out by these great radiator guys (S and S Radiators in Oceanside) because she made it across the continent and back without overheating to the point of damage... and I drove her all day every day through hot n muggy Tennessee and Arkansas. I concur with the guys... Nellie Belle is quite a looker. I couldn't ever hide her away though. She's the ultimate eye candy for a Pintoholic like me! ;D
One can never have too many Pintos!

pintogirl

Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

Fred Morgan

Kim that is great looking could be better then a ski enema !
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

pintogirl

Thanks for the tip on the cap. I will try to find one. That would be a lot easier. I was planning on just wire tieing the gauge under the hood somewhere anyway. Don't want to run it in the car because she is to clean to cut holes in.

Thanks for the nice comment on her. She is my best looking Pinto!!   ;D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

sedandelivery

I forgot to say that's one fine looking wagon!

sedandelivery

I bought a MR Gasket radiator cap for my Pinto SD which has a thermometer built right in. Pep Boys have them, just make sure it's the right "poundage" for your car. Mine was 13 pounds. The guage works well, and there is no real installation.

pintogirl

Nellie Belle!!!!! LOL



Yah, I finally dug her out of her parking spot. Got the cob webs and dust off of her! I have been procrastinating on driving her because I just feel like she is getting hot. She had a hot smell to her when I drove her last year. I have been waiting for hubby to install a temp gauge under her hood, but things keep getting in the way. I decided I couldn't wait any longer. Just had to drive her. I figured at 3am and 8am in the morning, it won't be all that hot so she should be ok.

I checked her fluids, well except for the water, that is why her hood is open in the pic., a reminder for me to check it when she cools down! LOL So she should be ready to roll at 3am tomorrow!!  ;D

I know, boring, but I haven't started a post in a while, so what better to talk about but Nellie Belle! LOL
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA