Mini Classifieds

Wanted Pinto Fiberglass Body Parts
Date: 05/19/2018 04:56 pm
Need Interior Panels
Date: 07/09/2018 04:59 pm
71,72 Pinto Door Panels

Date: 06/17/2018 08:27 pm
Various Pinto Parts 1971 - 1973

Date: 10/01/2020 02:00 pm
Seeking reveal molding for driver's door for a 1980 Squire Wagon
Date: 11/08/2020 02:10 pm
1971 Pinto Runabout turn key driver

Date: 12/04/2018 07:40 pm
2.0 Mickey Thompson SUPER RARE Rocker cover and belt guard
Date: 08/22/2017 09:21 pm
Interior Parts
Date: 08/07/2017 03:59 pm
Leaf Spring Mount Rubber Insulator
Date: 08/05/2018 01:58 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 563
  • Total: 563
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Ruby RedHot's Door

Started by blupinto, April 26, 2010, 10:01:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Fred Morgan

After you get center pin backed out of rivet 1 hand on the glass the other you need to compress rivet back side while pushing it through glass.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

blupinto

Fred I never thought of that! Thank you! How can I secure the glass so it doesn't break...unless I'm thinking what you're thinking... it might just be crazy enough to work!  ;D
One can never have too many Pintos!

Fred Morgan

Becky try real short 1/4" bolt with channel locks. The pin in the plastic rivet is 5/16" use 1/4" and you will not need to be perfect center. 1 side of pliers off center on rivet head so pin will clear.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

blupinto

Ha ha Jim you're killing me. The regulator's fine. The glass itself is what I want to swap. On the '71 door windows there are two light blue plastic retainers that hold the glass onto the regulator. With a bit of pushing and stubbornness I was able to push the pins (same plastic) out of the retainers... but I had the advantage of having the door removed. In that way I had the proper leverage. I'll have to try the 2X4 thing, so I might not crack the glass. ;D
One can never have too many Pintos!

71pintoracer

Whenever I replace a window regulator at work I have to drive the steel center out of the pop rivet before drilling the rivet, I use a 2x4 cut to size behind the regulator and glass and hammer away!!  :lol:
If you don't have time to do it right, when will you have time to do it over?

Bigtimmay

ive never had to remove the windows in any of my pintos/bobcat yet.  It cant be all that hard and i can tell you this for sure no window repair place is going to remove your door just to pull the glass so it cant be all that hard to remove them prolly just pop the clips and pull it out like any windowon any car the window track should support the window till you pull it out.
But then again i could be wrong guess i can go take a look at my cars track tommorow if its not raining again need figure out wats rattling in there anyhow it sounds like broken glass though if it isll ill vaccum it out while im in there.
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

blupinto

Ok today was Cheat Day. I had Jerry next door adjust the door instead of doing it myself. Good thing- adjusting a door is WAAAAY more complicated than I thought! It's not perfect but it's a lot better... and closes easier. The window and the handle are still proving difficult so sometime next week I'll tackle at least the door handle. I'm still open to ideas for a better way to pop the window retainer pin when the door is hung... ::)
One can never have too many Pintos!

blupinto

I think I'm good with the paint right now... ;D

Next question: I want to swap windows. Is there a preferred method of popping those blue plastic pins out with the door mounted?  When a door is off it's not hard to put a support for the glass in there (a Turtle Wax can with that yellow-green top works well!) but when the door is vertical it poses a challenge... or am I worried for nothing? I plan to push the pins out like I did on the original door.
One can never have too many Pintos!

blupinto

OK I don't have pictures but I did start the painting. I got my 320 grit sanding block, Rustoleum black metallic paint and rubbing alcohol (cleans surface off and dries fast). I sanded til there was no rust visible and wiped it with alcohol rag. I newspapered and masked the heck out of the door and have so far put two coats on. Thepaint is a little more metallicky than I care for but it matches the original paint the best of everything. I'll take pix later.  ;D
One can never have too many Pintos!

blupinto

One can never have too many Pintos!

Bigtimmay

Floor jack will work just make sure you put a pillow or sumthing on it before you start jacking the door up you dont wanna screw it up
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

blupinto

Dwayne, I'm not saying Fred did me wrong...on the contrary.  I do wish things were more moveable like latches and door locks but as long as they're fixable I'll work them. I can't thank him and Team Riggs enough for installing the door period! I just wish I noticed the door being a little off while it was being installed, while there were strong arms and wood blocks to assist. As it stands I will probably be employing the floor jack as my helper, as no one around here will help me. I'm just glad it's fixable (as opposed to the door's hinges being bent or something).
One can never have too many Pintos!

dga57

Quote from: blupinto on April 26, 2010, 10:01:08 PM
Ruby herself isn't in need of a Your Poject thread...yet, but her newly-acquired door sure does! lol. It was a mess inside and out! With some elbow grease the outside and the inside where dirt and water collects wiped out it's not bad looking. The door needs to be aligned and I'm hoping it's possible. Sometime this week I am going to sand and paint the interior top and bottom so I'm hoping to find black metallic paint with a satin finish.  Also I will be swapping windows, as the "new" one isn't factory tinted and the rest of Ruby's windows are. Then there's the outer door handle. Ruby's original is still pretty shiny so I want her to keep it. There's more stuff too, like the upper window sweeps aren't allowing the window to go fully up...the sweeps themselves have turned to brittle plastic (yes it snaps!) and there's rust cancer under the wide black sticker trim on the bottom of the door (more on that later).  I am beseeching you all to help me here!


Anyway, here are a couple before and after pictures taken today.  The door doesn't look half bad!

Becky,

I would say it's an extraordinary match to have been transplanted from another car!  It will take a little more work to get it where you want it, but all in all, I think Fred did you right!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

larjohnson

Becky...believe it or not I too had to repaint the metal part of my 1971 Pinto's interior side of her doors.  I went to Walmart and got a can of their .97 cent paint (comes in glossy and satin) and it works great.  I also went to my local auto parts store and got some vinyl and carpet dye, which comes in a spray can also for around $6.99 a can.  This viny and carpet dye is great stuff...it'll take the vinyl anywhere in the car, and make it like new.  All you have to do is apply it like you're spray painting anything else from a can.  It's easy, and your interior will look brand new.  BTW, I used the Walmart paint, and repainted the dash...the car literally looks brand new...check out my gallery...have a great day....Larry
Had a 1971 trunk model in High School, wanted another for old times sake, just purchased another in Washington State, very nice restore project.  I also own an all original 1972 Ford Pinto Runabout, one owner, always garaged, with 33,000 actual miles.  Life is SWEET!!!!

blupinto

Ruby herself isn't in need of a Your Poject thread...yet, but her newly-acquired door sure does! lol. It was a mess inside and out! With some elbow grease the outside and the inside where dirt and water collects wiped out it's not bad looking. The door needs to be aligned and I'm hoping it's possible. Sometime this week I am going to sand and paint the interior top and bottom so I'm hoping to find black metallic paint with a satin finish.  Also I will be swapping windows, as the "new" one isn't factory tinted and the rest of Ruby's windows are. Then there's the outer door handle. Ruby's original is still pretty shiny so I want her to keep it. There's more stuff too, like the upper window sweeps aren't allowing the window to go fully up...the sweeps themselves have turned to brittle plastic (yes it snaps!) and there's rust cancer under the wide black sticker trim on the bottom of the door (more on that later).  I am beseeching you all to help me here!


Anyway, here are a couple before and after pictures taken today.  The door doesn't look half bad!
One can never have too many Pintos!