Mini Classifieds

1973 Pinto Runabout

Date: 03/25/2019 09:02 pm
13x6 minilite style wheels MAKE OFFER——NEED GONE

Date: 08/01/2018 01:17 pm
1979 pinto
Date: 04/19/2018 02:02 am
A.c. alternator hrackets
Date: 09/03/2017 12:11 pm
cam pulley
Date: 05/30/2018 04:56 pm
1979 Pinto Sedan Delivery

Date: 06/15/2019 03:30 pm
Need Mustang II Manual Transmission Mount
Date: 04/21/2017 02:03 pm
Looking for a 1980 windshield
Date: 07/30/2020 04:51 pm
73 2.0 Timing Crank Gear & Woodruff key WANTED
Date: 09/01/2017 07:52 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 899
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 552
  • Total: 552
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

New Member..New to racing...Pinto Road Racer

Started by pintoroadracer, April 05, 2009, 08:40:46 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jimk351c

Nice to see yet another Road Racer on here!

Dick Elliott, I still owe you a phone call :)
Jim Karamanis
'72 Vintage Road Racer
Manassas, VA
jimk@elbracing.com
http://elbracing.com

wingman72

Looks great, do you know where the fenders came from??  I run the same model year up in Iowa(MAM).   
2nd place Mid Am Championship 2000,2001, 1st place 2008

375instroke

What's going on with this car?  Have you posted pics?  I have a Pinto that needs circle track mods to be reversed, and will be testing it out in April.

Srt

Quote from: pintoroadracer on May 21, 2009, 07:22:46 AM
Finally got the Pinto ready for the track and FINALLY got a pic of it.  It ran great and had no issues.  Spent about 2 hours on the 2.1 mile track.  

My buddy took about 225 pics with his good camera.  I am going to get the DVD today and will sort out some good on track shots for you guys.

sure would like to see those pics or a video.  and i'm with hanto.  build pics are cool too.  maybe we can all schedule a visit to wherever you are at the track
the only substitute for cubic inches is BOOST!!!

slooldracer

still racing my 2 litre in SCCA/NASA what part of the country r u in ?
The older I get, the faster I was

71HANTO

EXCELLENT...Looks like a blast...can't wait for more pics :amazed: I'd love to see pics of the suspension setup if you have any.

:welcome:

71HANTO
U/2.0L 71 Vintage Trans-Am Pinto Project
"Life is a series of close ones...'til the last one"...cfpjr

pintoroadracer

Finally got the Pinto ready for the track and FINALLY got a pic of it.  It ran great and had no issues.  Spent about 2 hours on the 2.1 mile track.  

My buddy took about 225 pics with his good camera.  I am going to get the DVD today and will sort out some good on track shots for you guys.


dick1172762

EP73! Did you ever post or E-mail me the picture of the drivers side of the panahard rod. I talked to you a while back about it. Glad to hear your doing good against the ricers. When are you going to try hill climbs with the group out of your area?  Dick Elliott   
Quote from: EP73Pinto on April 07, 2009, 08:02:08 PM
Welcome to PCCA. Nice to see another road race Pinto. I have a 73 Pinto that road raced from 76 to sometime in the mid 80's in the ICSCC. (International Confrience of Sports Car Clubs). It was class champion 3 times with 3 different drivers. I auto-x it now in SCCA E Prepaired. Search my posts to see pix and get details on the mods. I'm having a blast beating Honda's and VW's. Talk to you later.
Its better to be a has-been, than a never was.

EP73Pinto

Welcome to PCCA. Nice to see another road race Pinto. I have a 73 Pinto that road raced from 76 to sometime in the mid 80's in the ICSCC. (International Confrience of Sports Car Clubs). It was class champion 3 times with 3 different drivers. I auto-x it now in SCCA E Prepaired. Search my posts to see pix and get details on the mods. I'm having a blast beating Honda's and VW's. Talk to you later.

turbopinto72

Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

pintoroadracer

Still working on getting some pics uploaded...my wife hogs the camera as she is always taking pictures of our 2 year old.

Pinturbo75

nice to meet u but this post is worthless without pics!!!
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

pintoroadracer

Hello all.  I am new here.  I just purchased a Pinto Road Racer from a buddy in town.  I sold my 91 Firebird (bought it cheap and sold it for $2000 profit) and decided to buy this car.  It has the 2.3 in it and the 4 speed manual.  Roll cage installed and was a racer for several years....last being around 1995.

I worked on it all weekend and have it running.  Needed a new Holley Fuel Pump and a couple new stainless lines that were leaking fuel.  Also put a new Cam seal in and fixed a leaking radiator.  She runs good and only needs a few more items and changes to make it legal for the local asphalt road track (Motorsports Park Hastings, Hastings Nebraska).  The braked bled our okay and the bias valve works too.  Just need to turn them rotors and repack the bearings.

I am waiting for the repair manual to arrive this coming week.  Had some questions on timing and what not.  It has a MSD box for ignition and I am unsure where to set the timing at.  I think I am around 15 deg. btdc at the moment.

I am also curious on the best resource for parts, of course, like we all are here I imagine.  Need some new bushings and things.  Any info helpful.


BTW, I am 34 years old and this is my first "racecar".  Been wanting to race since I was a wee pup but never had the money or chance (plus Dad and Mom thought I was nuts as it wasn't a natural thing around our little farm)  Well, the chance came to me and the money will just have to trickle in like always.  My boss has an 500 hp 1985 camaro and has raced over 20+ years, so I have good help on that end as far as setups go.  The oher nice thing is we work in an auto repair shop (he owns it) so we have a great place to work on the cars and I can get parts for cost if NAPA or ADVANCE has the ability to get them for me.

That is it for now.  Cant wait to meet you all and I will try to get some pics up soon.

Barry