Mini Classifieds

Rally spoiler wanted
Date: 05/04/2017 01:32 pm
1973 Ford Pinto, Shift linkage for a/t and cross member
Date: 02/25/2017 08:45 pm
WTB 1974 or 1975 Pinto Grille and Turn Signals
Date: 04/08/2018 05:47 pm
2 Pinto Wagons for Sale

Date: 10/29/2018 02:02 pm
'80 Pinto Wagon
Date: 02/01/2018 05:20 pm
2.3 front sump oil pan
Date: 07/24/2018 03:17 pm
Wanted: Oil Breather F0ZZ6A485A "87-8 from 2.3L Turbo
Date: 08/06/2021 02:23 pm
Wanted 1973 Ford right fender
Date: 06/03/2017 08:50 pm
NOS Sedan decklid

Date: 10/23/2019 11:51 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,457
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 526
  • Total: 526
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Let the painting begin!!

Started by CHEAPRACER, September 03, 2008, 10:13:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

larjohnson

Your Pinto's looking great!!!!!! I just went thru this repaint a few months back.  It's amazing what a little paint will do when it comes to improving the appearance of your Pinto.  Good luck!!!  Looking forward to seeing the finished product.   Larry :police:
Had a 1971 trunk model in High School, wanted another for old times sake, just purchased another in Washington State, very nice restore project.  I also own an all original 1972 Ford Pinto Runabout, one owner, always garaged, with 33,000 actual miles.  Life is SWEET!!!!

CHEAPRACER

and more
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

CHEAPRACER

Overshot my completion date almost by a year. Now my goal is at least by next years Knotts show. Some updated pics for you.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

CHEAPRACER

I thought I had pics of the whole repair process but I was wrong. I cut out the rust on the inner and outer panel, welded in new panels pieces, sprayed them with metal etching primer, a couple coats of rustoleum, then a heavy dose of rubberized undercoating on the inside wheel well and deep in the rear compartment.May not be the perfect way of doing it but I'll find the source of the water leak and I'm sure the problem will be solved.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

dholvrsn

I don't know about him, but I used fiberglop to repair those spots on my wagon.
'80 MPG Pony, '80-'92
'79 porthole wagon, '06-on
'80 trunk model. '17-on
-----
'98 Dodge Ram 1500
'95 Buick Riviera
'63 Studebaker Champ
'57 Studebaker Silver Hawk
'51 Studebaker Commander Starlight
'47 Studebaker Champion
'41 Studebaker Commander Land Cruiser

dave1987

That rust spot is scary! I have it bad on my passenger side quarter panel in the exact same spot, just larger. How are you going to repair it?
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

CHEAPRACER

Quote from: smallfryefarm on January 23, 2009, 11:03:59 AM
Hey i was wondering what size those tires are on the front of the car. I have 15 inch wheels but i havent bought tires yet wondering how tall i can go with out rubbing.

165-80r-15 on 3.5" wheels. I have yet to rub them even with the front lowered about 2 inches but  I'm sure it's possible.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

smallfryefarm

Hey i was wondering what size those tires are on the front of the car. I have 15 inch wheels but i havent bought tires yet wondering how tall i can go with out rubbing.
Smallfryefarms Horsepower Ranch

CHEAPRACER

My junkyard hood wasn't too straight and someone closed it with the air filter stud loose or something. It looks like a lot of filler from the picture but it's pretty thin skim coats of Evercoats polyester putty. Stuff works good for flattening panels if you have the patience but they price it like it contains gold.

And I just scored a gallon of Victory Red (ya I know it's a Chebby color) urethane base off ebay for $74.99!!! That's a savings of about $325. I'm going to assume it must be old stock, I'd hate it to be the other...
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

CHEAPRACER

Some pics of the only rust spot found
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

r4pinto

Thanks for the rivet nut idea & where to get it. That should get me able to get a mirror on the passenger side door. +1 for the info.  :)
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

CHEAPRACER

   The vise grip idea won't work with me, my arms are too thick and I can only get to the front nut. I've done my home work and the proper name for these are rivet nuts. The tools are sold for about $30-$150 on the net and they do make special pneumatic high dollar ones for production guys. My budget told me to check the local Harbor freight and, not to my surprise, they had one in stock for $16.99 with the 100 piece nut set for another 10 bucks. I'm still thinking about the nut set as it's aluminum and there are much better splined steel nuts on the market, but then again, it's only a mirror not the door so they should be fine.
   I've also tried, for the first time, Epoxy primer. Having used only polyester, 2k urethane, and good old lacquer in the past, I've found this stuff to be very shiny (almost as good as cheap paint) so you can see any imperfection in the body work before block sanding or painting. I'm not sure if all epoxies are this way but I'm using DynaTone by Alsa corp and it seems to be good stuff. If it sands well then this will be my primer of choice.
   The camera is loaned out as of this typing but I'll post pics soon.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

CHEAPRACER

I'm just getting ready to try the vise grip method with a very small pair and if that don't work then it's drilling time. I injured my back & have been out of commission for awhile so tomorrow will be my 1st day back on the Pinto job.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

dave1987

I just had to do this while removing my old chrome mirror from my driver's side. I ended up using a 6" vice grip. I had to reach through the uppermost center hole in the door to reach it though. I have long and skinny arms though, which helped.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Did you ever get the blind nuts out? Curious minds want to know.....

Chris
Restoring a 1976 MPG wagon - purchased 6/08

CHEAPRACER

OK, problem already. I have the sport mirrors which are not coming off due to the blind nuts spinning in the body. I guess I'll have to drill them out so time to buy another tool kit I'll only use once. Good thing I love tools. Anyone with any better ideas. There doesn't seem to be enough room for vise grips to hold them. Thanks.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0

popbumper

Good luck on your project! I can relate to your comments about "finding less time" to do things, which is why my car also is an extended project. 20 years ago, when I was in my 20's, I had the good fortune of living alone in a garage apartment, where I did a frame off restoration on a 1957 Chevy 2 dr hdtp that I bought, running and solid from California - for $800!! Like you said, those were good times - I could work on the car nearly every day without any hesitation, and while money was lean, time was abundant.

With my family now, and a house/lawn to maintain, and no good working space, it's a bigger challenge. The Pinto will still get finished, but on a much longer calendar. Have fun with yours!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

CHEAPRACER

  Well, here I go into the biggest step I've taken so far on building my car.
  A little background of my painting talents include about 6 years of ROP education and I've got my name on more then 20 paint jobs over the years but I haven't picked up a paint gun now in over 8 years so the water stuff, low voc, Cal emissions crap is like starting over.
   I started my bodywork this past weekend to the surprise of how little dented up the Pinto really was. The biggest part of the whole thing, filler wise, was the replacement hood that I purchased to replace the one I had cut out for the upper intake manifold. I've since rotated and shortened that so a new uncut hood was on my list & I also plan to reinstall the scoop. After all was filled and sanded, I brought out my new can of polyester primer that didn't make a sound when the can was shaken. I guess it wouldn't if it was hard as a rock now would it? Back to the paint store I went, who a day earlier said they would be open on Sat until noon, only to see a "closed for Labor day weekend" sign on the door. Well, I'll try everyone else...no luck closed. Called 3 Napa's and found one with primer, showed up to find out they lied to me about having quart sized and a gallon was over 100.00. I can buy the best for less then that before I'd pay for some no name brand so I bought a simple can of Duplicolor to cover my metal until my original store opened back up for business.
  I've found it's harder now to find time then ever for my project. It seems there is more lawn to mow or more kids to attend to. I'm predicting a 3-4 month long timeline when I could have done it in 3 weeks 20 years ago.
  One final thought though, I'm having fun, not getting burned out, and it's turning out pretty good so far so here's a few pics and thanks for looking


Edited 9-4; Alright, how come I spelled lawn as glbutt or was that a trick.
Cheapracer is my personality but you can call me Jim '74 Pinto, stock 2.3 turbo, LA3, T-5, 8" 3:55 posi, Former (hot) cars: '71 383 Cuda, 67 440 Cuda, '73 340 Dart, '72 396 Vega, '72 327 El Camino, '84 SVO, '88 LX 5.0