Mini Classifieds

1976 pinto for sale

Date: 01/12/2017 02:08 pm
72 Turbo Pinto "Hot Rod" rebuild
Date: 08/09/2018 11:09 am
79-80 full glass hatch

Date: 01/04/2017 04:04 am
1974 Pinto Door Handles

Date: 03/07/2017 04:06 pm
1973 Pinto Wagon

Date: 05/06/2022 05:13 pm
Need seals Pinto Wagon
Date: 02/16/2017 05:09 pm
pinto wagon parts
Date: 12/19/2019 01:43 pm
New cam

Date: 01/23/2017 05:11 pm
WTB: Factory air cleaner and fan shroud 1971 2.0
Date: 02/05/2020 11:06 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,895
  • Latest: tdok
Stats
  • Total Posts: 139,581
  • Total Topics: 16,270
  • Online today: 1,779
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 1743
  • Total: 1743
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

78 bobcat in the local yard!

Started by dave1987, August 28, 2008, 02:29:07 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dave1987

Roof rack is shot. It wobbles, faded and gouged to hell like someone tried putting some steel stock on it but didn't put a towel or anything under it.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Quote from: dave1987 on May 21, 2009, 01:30:27 AM
Not beating a dead horse at all. Been busy, lately. I pulled them from storage last week and since I last THOUGHT I sent you the PM about them, getting things done around here has been hectic! I sent you an email with the photos instead of PMing you this time! :)

Dave:

  Still have not received an email from you; not sure what's up, my spam filter has nothing in it. I sent you a PM with my email address again. Thanks.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dholvrsn

'80 MPG Pony, '80-'92
'79 porthole wagon, '06-on
'80 trunk model. '17-on
-----
'98 Dodge Ram 1500
'95 Buick Riviera
'63 Studebaker Champ
'57 Studebaker Silver Hawk
'51 Studebaker Commander Starlight
'47 Studebaker Champion
'41 Studebaker Commander Land Cruiser

dave1987

Not beating a dead horse at all. Been busy, lately. I pulled them from storage last week and since I last THOUGHT I sent you the PM about them, getting things done around here has been hectic! I sent you an email with the photos instead of PMing you this time! :)

Carolina Boy, sorry but there is no way to cut floor pans from that yard anymore. They didn't know I brought a sawzall with me when I cut the driver's side out and quickly told us no electric tools allowed, and they no longer have services to cut the pans out.

r4pinto, I sure do! Light, lens and pigtail with the sleeving still on it! :) You've got a PM!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Sure would like to get those rocker moldings - yeah, I know, I'm beating a dead horse at this point.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

r4pinto

Dave, I read that you got the license plate light. If you still have it how much for it?

Thanks
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

Carolina Boy

I need the floorboard if it is in good condition and can be removed. I only need the front passenger side from the seat mounts to the toeboard. If Fred is reading this, Would this work in my 78 Pinto?
If life gives you a lemon, squeeze it in your moonshine and buy a Pinto.

dave1987

I finally got around to getting the pictures of that wagon off my phone. Here's what was left:

1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

I really wish they were, I would do a conversion on mine if they were. :(

They are for the center windows on Wagons. The black plastic hinges that latch the window open or closed.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Quote from: dave1987 on May 01, 2009, 11:46:23 PM
Rocker moldings.... Let me pop into my storage sometime in the next few days and see if it is with the rest of some wagon chrome molding. I'll PM you.

Nice, thanks!!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

blupinto

Hi Dave,

      Did you say you snagged the pop-out window inserts (that are in the pillar where the window hinges)?
One can never have too many Pintos!

dave1987

Rocker moldings.... Let me pop into my storage sometime in the next few days and see if it is with the rest of some wagon chrome molding. I'll PM you.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Dave:

  Reading back through the thread - I assume you sold the chrome rocker moldings? I never heard back.

Sure wish I could have those doors!!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dave1987

Went out to the yard one more time before they yank the bobcat out to be trashed. Too bad I can't afford the doors, they are rust free!! :( I guess they wouldn't fit my Sedan though, the Bobcat being a wagon...

I pulled the head lamp retaining rings and adjuster springs. The heater core and hose clamps. The wiper arm actuator assembly with the posts, blower motor mounting plate, duct cool air intake grommet, e-brake cable, and a few miscellaneous bits and pieces like brake hardware and fasteners.

There is some good glass still on the car as well as the fold down rear seat assembly that wish I could have taken, as well as a fuel tank in really nice shape, but alas, I cannot afford it. :'(

Soo much was saved from this car, it is a shame to see it the last time before it is crushed into scrap metal. At least it will live on through several other Pintos. Those whom I have sent parts to, you know who you are!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

I was at the yard a few days ago and figured out how to remove the window pops! I have set of two black ones up for grabs now. All the hardware, aside from the screws, is there. No cracks and the pins still fit tight.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

bbobcat75

what r u asking for the m e r c u r y letters??? and  what shape are they in im mean the chrome!! thanks!!
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

dave1987

I will try to settle prices and shipping costs with everyone by Sunday. I still have an item or two pending and I want to be sure everyone can get what they want at once before I start sending things out.

My girlfriend's starter went out on her Jeep tonight so I won't be able to get any shipping or anything done tomorrow, I will be replacing her starter and then I work from 4PM to 11PM.

I will try to at least get boxes tomorrow so I can package things up and then on Friday I can take it all in for shipping quotes. I'm one of those people that are currently living paycheck to paycheck and will need to get payment in advance before I can send anything out.

If there are any questions or concerns, please PM or email me and I will respond ASAP. Thanks for everyone's patience!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

75bobcatv6


dave1987

The clear plastic lenses are still in good shape, no cracks, but they need some plastic polish to clear up the fogging. The chrome trim on them has some light stone specking to them, and they have the bulb holders with pigtails still on them. They are still on the metal body panels with the mounting brackets, and I have the hardware for them too if you need that.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

75bobcatv6

I am what condition are they in? and how much with shipping? im also in the process of acuiring some cash to pay for some panels that someone else on here has. im really trying to get this car on the road and somewhat show able =)

dave1987

75bobcatv6, I'm sorry but the grill is called for by someone else. I do however still have the turn signal lighting assemblies if you are interested.

popbumper, I've got someone else interested in the rocker panel molding, but they have seen better days and might not sell. I need to buff them a bit and see how well they clean up.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Dave:

  I sent you a email on the radio bezel and dash cap. My zip is 75082. Let me know, thanks!

Chris

PS - do you have any pics of the chrome rocker moldings? I need a clean one for my passenger side (my driver's unit is good).
Restoring a 1976 MPG wagon - purchased 6/08

75bobcatv6

Dave if you havent sold the Grill and signals from the Front you have them sold. I need the Grill most but would love to have the lighting too. let me know shipping to 85053 please

TIGGER

Quote from: dave1987 on September 06, 2008, 11:55:51 PM
TIGGER, here are the pictures of the carpet. There are a couple tears and you can see were the edge is coming off, but I think sewing could fix the edge. I don't know what condition your current carpet is in.

The stuff on the back seat section is dirt, I can vacuum it off.


Dave, I need the rear piece for sure.  I may take the cargo piece as well.  What are you asking for both pieces and what would shipping cost to 97006?
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

dave1987

Alright guys, PM me if you are still interested!

I have pictures of most of the other items I pulled, so just ask if you're interested in anything else.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

Phils Toys, here are the wheel well moldings and the trim + front grill (if you want it).

Two of the three wheel well moldings are damaged, but they arn't horrible (I've seen a lot worse). Pictures show the two that are bad, but the third one (top) is in darn good shape! A good buffing and they should look pretty nice again.

The hood chrome and the stip in the middle of the grill could use a good buffing and they'll shine like new. The rest of the grill might like a coat of paint, but that's entirely up to you if you want it.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

popbumper, here is the radio bezel, dash pad and the steering wheel.

The bezel could use a coat of paint, the dash pad should DEFFINITELY be capped (or restored, but expensive), and the steering wheel....I don't know how to restore a steering wheel.  :P
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

TIGGER, here are the pictures of the carpet. There are a couple tears and you can see were the edge is coming off, but I think sewing could fix the edge. I don't know what condition your current carpet is in.

The stuff on the back seat section is dirt, I can vacuum it off.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

I will be posting pictures shortly, I just need to shower first!

TIGGER - I got the back piece of the carpet for you today. Let me know if you still want it.

popbumper - I got the radio bezel, dash pad and the steering wheel.

Phils Toys - I got three of the four wheel well chrome trim pieces. The rear driver's side was so hammered it wasn't worth saving. I also got the chrome trim on the front of the hood, as well as the grill which is in great condition if you want it.


I also pulled:

Air vents and ducts
Rocker panel chrome molding w/hardware
M-E-R-C-U-R-Y letters for front and back
E-Brake with wood grain handle
**E-Brake cover
Wood grain panel for front of dash
**Door panels
Turn signal light assemblies
**Turn signal cam
"Spoiler" from the rear hatch w/hardware
**Charcoal box
**All marker lights
**Front seats
Chrome headlight surrounds
Cargo area dome light
**Heater controls
Door/Carpet chrome strips
Steering column plastic housing
2x visors
Glove box insert
Horn
License plate mount w/light
**Firewall weather strip
**Dash accessory tray steel support
**Inner wheel well plastic (front)

If there is anything else someone wants, just let me know! The items listed with stars are things I will be using on my Pinto, but there are a few things I might be willing to let go if someone actually needs them.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Restoring a 1976 MPG wagon - purchased 6/08