Mini Classifieds

1975 Pinto wagon emissions decal wanted
Date: 09/20/2018 11:01 pm
6.6.75 carrier
Date: 02/14/2018 06:47 am
hubcaps

Date: 10/31/2018 12:04 pm
PINTO TRUNK LATCH & CATCH

Date: 03/23/2018 09:39 pm
Looking for front seats
Date: 08/10/2021 09:54 pm
95 2.3l short block
Date: 03/18/2017 04:54 pm
Need '75 Pinto wagon front seat belt assembly housing
Date: 10/03/2018 10:46 pm
Wanted Dash for Pinto up to 1975
Date: 01/19/2020 09:06 am
Leaf Spring Mount Rubber Insulator
Date: 08/05/2018 01:58 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 644
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 642
  • Total: 642
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Paradoxical Platitudes for Pinto People

Started by Pintosopher, August 28, 2017, 06:24:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pintosopher

 The pond of living is full of Ducks sometimes in pairs, mostly fleeing the Buckshot of the Karmic Guns that hunt those daily ;)
Pinto People live in a Paradox of parts, lost ideas , missing manuals and even  a cross reference or two. But we persevere , and we do find it or modify it to fit. The season gets us in a doldrum, and then we panic and rush to completion before that first show or meet.
So as the creak of temperatures changing lulls you into a sense of apathy, retrench , reboot, and fight to keep that Horse rolling down the road. Someday, we be in Repop heaven and the Pinto will be immortal.. Be a good steward, and make sure it'll be around for decades. ;)
Pintosopher a Stable or Lunatic  ranch hand in the Barn :o
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

Pintosopher

Time waits for no one, Yet the cars keep climbing in interest as they age. What is the value of your survivor or resurrection ride? $24 thousand for a 74 Pinto squire wagon with all the options at a recent Mecum auction.  Orange color too! What can a nicely maintained ride be worth? Yet the one thing that makes all this relevant, Is People! You must be a reasonably good steward of your health to keep the legacy going.
I spent a bunch on health supplements that could easily go towards the Pinto and the tools to keep the garage ready to maintain them.
Priorities, Health, Home, then cars and the people in your life. The last two are interchangeable given circumstances that vary.. ;)
Don't let the Pair of Ducks rule your life.. It's a basic principle to happiness 8)
QVACK Qvack.. :o
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

Pintosopher

One week into the New Year, and the world is still painting with the Horsetail brush of Equine ignorance. What to do as the frost and Ice partially thaw? We know our rides are cool, the Thumbs up crowd is growing, Soon another Historical article of our interests? We shall see. I would challenge the publishers to do  a heads up comparison of the Vintage racing versions and even a Street legal performance version against a current comparable displacement compact.
In the meantime, don't let that popsicle outside dim your enthusiasm. Plan , create, and even share ideas, The weather won't last forever.. ;)
Pintosopher, Apprentice to the scribes of the stable, more manure shoveled than you might imagine ::)
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

Pintosopher

Thanks Dick,
May we all be blessed with good health, prosperity, and a sense of fellowship that keeps the Barn warm and the Pinto riders dry and full of oats...
Merry Christmas to all ... ;D
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

one2.34me

Thanks Dick, Merry Christmas and a Happy New Year to you, and to all Pinto heads everywhere.

dick1172762

Merry Christmas to all of our Pinto brothers and sisters through out the world. May 2018 be the year you're wishing it will be.
Its better to be a has-been, than a never was.

Pintosopher

Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

If you use 1/16" (.062) thick T6 aluminum it will be stronger than the trunk lid. Do not try to bend it yourself as T6 is very strong and will not bend without using a sheet metal brake. Get a piece of aluminum 9" x the width of the trunk lid. Then bend a 45 deg bend on the bottom 1". When you go to mount it, start in the middle of the trunk lid. On my red Pinto the trunk lid was gutted so it formed itself to the spoiler very easily. You may need to shim up the spoiler as T6 will not bend easily and would bend the trunk lid first. Best I can remember I had five 1/4" bolts holding the spoiler on the trunk lid. On the top edge of the spoiler on each end radius the spoiler so as to not stab someone. I did a 1" radius on mine. Easy as pie.
Its better to be a has-been, than a never was.

one2.34me

Your spoiler looks great Dick and thanks for the pic pintosopher. Was the 8" tall, 1/16" aluminum spoiler stout enough at speed, 80 or so, to avoid fluttering? (for lack of a better word)

dick1172762

The picture of my old red Pinto shows the rear spoiler after it was cut down from 8" to 3" to meet the vintage road racing rules. Same spoiler, just later on. The 8" spoiler fit the SCCA rules for autocrossing. The 3" spoiler fit the SCCA rules for road racing.
Its better to be a has-been, than a never was.

Pintosopher

Quote from: dick1172762 on December 12, 2017, 12:28:08 PM
The rear spoiler on my Red Pinto race car (when I was autocrossing it) Was bolted to the part of the trunk that hangs down and is about 1" deep. The spoiler was 8" high and 40 something inches long. The bottom 1" was bent at a 45 deg angle and this was bolted to the trunk lid. So the piece of aluminum was 9" X 40 something inches long and made out of .062 (1/16) T-6 aluminum.
Rear View..
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

The rear spoiler on my Red Pinto race car (when I was autocrossing it) Was bolted to the part of the trunk that hangs down and is about 1" deep. The spoiler was 8" high and 40 something inches long. The bottom 1" was bent at a 45 deg angle and this was bolted to the trunk lid. So the piece of aluminum was 9" X 40 something inches long and made out of .062 (1/16) T-6 aluminum.
Its better to be a has-been, than a never was.

one2.34me

I agree Dick, a set of Bassett 15x7s would be perfect. I saw a young guy at fabulous Fords with a set on his beater Mustang II this year. Looked great. I've thought about the hood pins for years to lighten the weight of the stock hood latch assembly, and to also lose the hood hinge buckets and hinges. Only problem is, every hole I drill into the body work makes it harder to sell, if necessary. I installed a 1/16" Lexan rear window with a stripped Pinto sedan trunk lid to replace the Runabout hatch. It's much lighter and I like the sedan look more. I'd definitely like to have functional spoiler, (and a reason to need one), on that trunk lid.

dick1172762

I don't thing your striped to the bone Pinto would look right with Panasports on it. A set of stock car wheels would be better as long as you have a boy racer Pinto for the street. A set of 7/16" hood pin would help with the look too. Two 1/8"X 1" straps over the back window says racer. And of course a rear spoiler on the trunk lid.
Its better to be a has-been, than a never was.

one2.34me


Pintosopher

Quote from: one2.34me on December 08, 2017, 05:26:50 PM
Pintosopher, what is the brand or name of the wheels on the 1971 Escort in your Reply #44 yesterday?
I believe they are Panasports or that Australian clone of the Minilites
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

one2.34me

Pintosopher, what is the brand or name of the wheels on the 1971 Escort in your Reply #44 yesterday?

dick1172762

Quote from: dga57 on December 07, 2017, 06:02:59 PM
Uh... the Capri was built in Germany through 1977.  There was no 1978 model, and the 1979 was marketed as a Mercury Capri which was a Ford Mustang clone.


Dwayne
Your oh so right Dwayne! I was mixed up because of the great clubs in England for Capri's. I stand corrected!
Its better to be a has-been, than a never was.

Pintosopher

Quote from: dga57 on December 07, 2017, 06:02:59 PM
Uh... the Capri was built in Germany through 1977.  There was no 1978 model, and the 1979 was marketed as a Mercury Capri which was a Ford Mustang clone.


Dwayne
Hmm.... do you smell Cologne? Is Annie or Clyde nearby? ;D
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dga57

Uh... the Capri was built in Germany through 1977.  There was no 1978 model, and the 1979 was marketed as a Mercury Capri which was a Ford Mustang clone.


Dwayne
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Pintosopher

Quote from: dick1172762 on December 07, 2017, 12:23:56 PM
The Escort and the Capri were UK's Pintos. Don't know about the Escort but the Capri's were made in England well after the Pinto's final year. The Capri's and the Escort's have a very large following to this day in England.
3 hours left in auction, Bidding has reached $ 10K....
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

The Escort and the Capri were UK's Pintos. Don't know about the Escort but the Capri's were made in England well after the Pinto's final year. The Capri's and the Escort's have a very large following to this day in England.
Its better to be a has-been, than a never was.

Pintosopher

Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

Quote from: pintosopher on December 03, 2017, 06:23:12 PM
I've heard the name before, But then the Irish and the UK take hillclimb racing seriously. Like WRC, it's a religion  ;D
I just saw his name on Speed Hunters with an Escort like Simon McKinley raced.
Its better to be a has-been, than a never was.

Pintosopher

Just a Concept , Rough but doable :P I'll have to get this one done in Color, or lose a few brain cells :o
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

She does have the right idea for sure. Spread the joy and try to live it to the fullest. For those who do not know, Jennifer has the best looking Pinto I've ever seen.
Its better to be a has-been, than a never was.

Pintosopher

Ponies in the barn, Hmm, a cuddly thought for those who know the sheer joy of Pintosophical existence.
Should you find yourself outside in the chill, get that cup of Oatmeal to warm the cockles of your spirit and dust off the Horse. You might even sneak in a drive if the world is dry where your stable resides.
Jennifer has the right idea.. Spread the Joy of the season
https://i.imgur.com/7vw9NDb.jpg?1
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

Pintosopher

Quote from: dick1172762 on December 03, 2017, 03:49:19 PM
Joe! What do you know about an Irish hill climber named Paddy McGrath?
I've heard the name before, But then the Irish and the UK take hillclimb racing seriously. Like WRC, it's a religion  ;D
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

Joe! What do you know about an Irish hill climber named Paddy McGrath?
Its better to be a has-been, than a never was.

dick1172762

I serve Amber Bock to one and all on holidays and never does anyone not like it. If I'm low on cash I get Bud light. After 3 beers they all taste the same any way.
Its better to be a has-been, than a never was.