Mini Classifieds

Looking for a 1977 Ford Pinto Runabout Hatchback
Date: 10/15/2017 10:03 am
Pinto wagon Parts
Date: 06/23/2021 03:25 pm
4:11 gears for 6.75 Make offer...NEED GONE

Date: 08/01/2018 01:27 pm
76 drivers fender
Date: 07/20/2018 08:24 pm
TWM Intake
Date: 08/15/2018 08:20 pm
1975 rear end, 8 inch, drum brakes, and axles, 3.4 gear.

Date: 11/08/2019 10:01 am
1972 Pinto SCCA BS race car

Date: 10/23/2018 04:01 pm
79 pinto front,rear alum bumpers

Date: 07/17/2018 09:49 pm
1971-73 2.0 motor moiunts
Date: 05/17/2024 09:18 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 925
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 539
  • Total: 539
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

5.0 mustang/fox police wheels

Started by 72Wagon, January 07, 2009, 08:23:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

72Wagon

Thanks Bipper, nice looking car. That answered one of my questions.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Bipper

I have 1986 police car wheels on a 72 Runabout. Rear tires are 225/50 and 205/50 in the front. The car is lowered about 1 3/4" all around and uses 1 1/4" wheel spacers in the rear and 1" spacers in the front. I don''t know if they will fit without the spacers. I didn''t even try because the wheel would be sticking in the wheel wells to far.   
71 Sedan, stock
72 Pangra
73 Runabout, 2L turbo propane

75bobcatv6

Current 255/60/r14's in the rear and 195/70/13's in the front
After i get my new rims those will be 255/50/R15's rear and 205/60/r14's in the front

72Wagon



Thanks everybody, no I can go do some more research.  One more question first, What are your cars running on, by this I mean do you run the same diameter size rims front and rear.
I have always run the 13's on the front and 14's on the rear mainly because of the raked look and also because the wagons seem to have oversized rear wheel opening that dont look right with the 13's.
Thanks again
  Kevin










thanks everybody
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Pinturbo75

this is where i got them i think ( my origonal link is dead) and they did the rims setup for the inside tangs like the smoothies in a 4 lug  dual pattern unpainted and shipped for 160. i wanted the nostalgia rim so i could use the stock hubcap but they said they could not do the 4 lug pattern in that rim style

http://www.thewheelsmith.net/
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Pinturbo75

the 15s are on my pinto in the rear. right now im only running a 225-60-15 but could go much bigger. got tied up with a  electrician last night so ill look up the manufacturer tonight when i get to the house.
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Pintosopher

72Wagon,
The Ford Motorsport catalog  P/N  is :  M-1007-D157.  Its a 15" diameter and 7" wide 4 hole wheel.

It's probably no longer available :-\

Pintosopher
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

oldkayaker

72Wagon,
Sorry for this diversion from steel wheels.
Wittsend,
There are some pictures of 1986 turbocoupes with the 10 hole aluminum rims at http://www.turbotbird.com.  Go to the showroom section-N and click on Nick Terezes photo.  Another one is in section-R under name Roy Howard.
Jerry J - Jupiter, Florida

Wittsend

Hummm...., yes, numbers (sizes, part #'s) would be great to get.  Regarding the reference to the early 80's T-Birds, can that be confirmed to be the same wheel?

  I have a '73 Valiant and "just" got myself a set of Mopar cop wheels before they disappeared from the Pick A Part.  I got them for $10 each. Then shortly afterwards the price went through the roof.  Those ,dog dish, cop car hubcaps with the holes in them, - they will run you about $150 for a nice set!

Anyway, I wouldn't want to miss out on something similar over here on the Ford side.

72Wagon

pintosopher, what are the width on those? If you know.
Kevin
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Pintosopher

This was an option on the mid 1980s CHP mustang before the 10 hole alloy was used. It was also listed in the Early SVO parts catalog of the same era.

Pintosopher
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

72Wagon

 4cammer72, yes I am interested in those steel wheels, what did you put them on and what size tire were you able to run?
I am running aftermarket chromed steel wheels with 14 on the rear and matching 13's up front on my 73 wagon. but the rus tpitting is starting to get worse I would like to go up to 14's up front and 15's in the rear.
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.

Pinturbo75

the early cop foxes had 14" steel wheels and the later used 15s. they go for about 600 a set if you can find them. i ended up going to a company in california that reproduces steel wheels and got 2 15x8 with my specific offset shipped to the house for 160, brand new..... if you are interested ill look up where i got them from tonight and post it up for you.
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

75bobcatv6

the ones i was thinking of were the style on reeds pinto that he sold. the red 71. those are what were on the cop cars where i grew up.

turbo74pinto

a 245/60/15 on a 10 hole fit on my 74 if that helps.

bob
Take a job big or small, do it right or not at all.

oldkayaker

In Florida here, the state troopers used the 5.0 fox Mustang for awhile.  From what I remember, the wheels looked like the standard 10 hole fox Mustang aluminum wheel but was painted black.  I believe they left the hub cap unpainted.  The 10 hole wheels are 15" by 7" wide with the 4.25" bolt pattern.  They bolt on to the Pinto but I do not know what the tire size limit is.  The 10 hole wheels also came on the early 80's Thunderbirds but with a different hub cap.
Jerry J - Jupiter, Florida

75bobcatv6

I don't know about cop wheels but all the late model stangs Ive seen as cop cars have the 15x7's on them. they are the nice styled wheels.

72Wagon

 I did a search on 14/15 inch wheels with the 4 lug patern and saw a post saying the fox bodied 5.0 cop cars had the larger wheels. I am assuming these are steel wheels, does anyone know what the rim width might be and if they are 14 or 15 inch. And last are they hard to locate. Anyone use them on a 71-73 pinto.
Kevin
1972 Wagon
2.0 (not stock), 4 Speed with Hurst shifter and roll control, Holley 390 4bbl, Spearco intake, MSD Ignition. 8 inch rearend 3.55 gears, custom dash and interior.