Mini Classifieds

parts needed
Date: 02/20/2017 07:58 am
1980 Pinto for sale

Date: 11/24/2016 06:32 pm
Looking for Passenger side Inner Fender Apron
Date: 10/28/2018 08:45 am
Parts Parts Parts
Date: 09/08/2018 03:13 pm
New cam

Date: 01/23/2017 05:11 pm
nos core support

Date: 01/03/2020 09:39 pm
78-80 Windshield
Date: 10/29/2021 03:11 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/18/2017 05:55 pm
1971 Pinto instrument cluster clear bezel WTB
Date: 03/16/2017 10:00 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,582
  • Total Topics: 16,269
  • Online today: 135
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 102
  • Total: 102
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Rear sway bar links...

Started by Rob3865, March 15, 2017, 12:35:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dick1172762

Strange! My 1" front bar fit like it was custom made for me. I used heim joints for the front links because the stock inverted T links tend to break. Never tighten the bolt that passes through the T link. Snug it up and double nut it so the bolt doesn't put the T link in a bind, If its over tighten, it will break sooner or later. I plan on using heim joints on the rear bar too. Have you though about a panhard bar in the rear? Racer Walsh used to sell one in the early 70's. Real easy to make one yourself with scrap material (old Vega's) and a couple heim joints. BTW Addco says the use of polly bushings on the frame mount and the end links will add 10% stiffness to the bar.
Its better to be a has-been, than a never was.

one2.34me

No problem Dick, much deserved.
For anyone interested, I put the Addco 345 (rear 7/8") and Addco 184 ( front 1") on my 75 Pinto. The 184 is no longer offered on Summit, they have the 875 for the front now. Both kits were a real hassle to get to fit. In back the chassis mount brackets didn't fit, and new had to be fabbed. I also did the chassis 1/8", 4"x4" steel reinforcement chassis plate you recommended Dick. Every bracket in the front kit didn't fit and the end links were basically twice as long as they should have been. New steel angles had to be purchased and fabbed. The 875 kit Summit now offers is just the same front bar, with only bushings and bushing brackets. The Addco 184 kit used to come up on Summit under 1975 Ford Pinto, chassis and suspension, Addco, prompts, with the 345 kit. In the end, the bars themselves fit well and have done a great job of improving the cars handling.

dick1172762

I remember the car very well. Wonder where it is today? I'm on the Ratsun (Datsun) web site ever day and not a word about it. With todays tech and tires it might work now. There is some outstanding well built 510's on that site. More Datsun people in the land of fruit and nuts than Pinto people in the entire US of A. 3 full pages every day of new post. Pictures of cars, trucks, planes, bikes, engines, rv's, etc,etc. A real treasure trove. The pictures are worth belonging to the site. Don't need a Datsun to enjoy the pictures.
Its better to be a has-been, than a never was.

Pintosopher

Quote from: dick1172762 on March 21, 2017, 04:48:32 PM
Jack! I guess he didn't like pig and V-8 Pinto in the same sentence . I think after 100+ tech tips with out a complaint, I'll get over this one. Back to Mustang II sway bars, back in the 70"s, the export front bar sold in Canada and available at US of A Ford dealers is a nice 1 inch bar and the only one I've seen that's formed to clear the V-8 Pinto oil pan. There may be others but I've never seen them. The rear bar is a different story though. Although nicely formed and mounted, it is really small in diameter at about 9/16". Will work so-so on a street Pinto. Better yet is the ADCO rear bar in either 3/4" dia for street or 7/8" dia for road racing or autocross. Only problem with the ADCO bar is it's upper mount is to the floor board under the rear seat. Little week there, but easily fixed with a steel plate of 8"square or so and 1/8"thick. This will give the upper mount a little more support in this area. I never cracked the floor board on my 80 Pinto racer but I did on my 72 Pinto racer. I'm sure it was because the 72 was on slicks which gave it more speed through the turns which placed more load on the floor boards. Easy fix. And remember that this is what I would do. What you do is up to you and only you. And Jack, thank you for the nice words.
Dick, No worries mate! Back in the 80's we had a creative guy that had really great fab support, and built a Datsun 510 with a 215 GM aluminum v8 for Street/solo2 use. The car was a serious $$ expenditure, and even with the engine under the cowling, it was too much motor in a short wheelbase. Box fenders and 15X10 tire/wheel on all 4 ends couldn't help that ride stay on apex, so there is a limit to this wondercar.
Pintosopher, Dermally infused with extra collagen in the Ego, Botox couldn't help these wrinkles ;)
Yes, it is possible to study and become a master of Pintosophy.. Not a religion , nothing less than a life quest for non conformity and rational thought. What Horse did you ride in on?

Check my Pinto Poems out...

dick1172762

Jack! I guess he didn't like pig and V-8 Pinto in the same sentence . I think after 100+ tech tips with out a complaint, I'll get over this one. Back to Mustang II sway bars, back in the 70"s, the export front bar sold in Canada and available at US of A Ford dealers is a nice 1 inch bar and the only one I've seen that's formed to clear the V-8 Pinto oil pan. There may be others but I've never seen them. The rear bar is a different story though. Although nicely formed and mounted, it is really small in diameter at about 9/16". Will work so-so on a street Pinto. Better yet is the ADCO rear bar in either 3/4" dia for street or 7/8" dia for road racing or autocross. Only problem with the ADCO bar is it's upper mount is to the floor board under the rear seat. Little week there, but easily fixed with a steel plate of 8"square or so and 1/8"thick. This will give the upper mount a little more support in this area. I never cracked the floor board on my 80 Pinto racer but I did on my 72 Pinto racer. I'm sure it was because the 72 was on slicks which gave it more speed through the turns which placed more load on the floor boards. Easy fix. And remember that this is what I would do. What you do is up to you and only you. And Jack, thank you for the nice words.
Its better to be a has-been, than a never was.

one2.34me

Hang in there Dick. You're a great guy with a lifetime's collection of FREE information and help. Hopefully, Rob will realize that you weren't trying to diss him and rejoin the herd.

Wittsend

I too thought the departure was a bit abrupt.  Especially since other Pinto's (with better weight balance) might benefit from a sway bar link improvement.

Wanted to say it seems the Mustang II site is back up. So anything to be gained on this subject over there is now accessible. The link is listed on these pages near the top in the left side bar.

dick1172762

Your the one that ask for our help. Sorry you didn't like the answer. Lipstick on a pig is a saying old as time and is only used here to state that this mod is a waist of time and will only make your car handle worse. My answer is only just that, my answer. It doesn't reflect the membership or the web site's feeling on this mod. It is just what I alone think on this matter. The sway bar link mfg has been shown several times on the various Mustang II sites. I told you that on my first post and I though that was enough. Sorry it wasn't enough info for you. Please do not leave our site because of one old mans rambling on the subject.
Its better to be a has-been, than a never was.

Rob3865

Then I will build my pig myself, my way and share nothing here.

Thanks and adios.

dick1172762

Very few people I know of use the Mustang II rear bar. When someone puts a rear bar on a Pinto, its to make the car handle better for road racing / autocross. ADCO rear bars are a better choice for a canyon carver. In this case, its really lipstick on a pig due to the fact a V-8 Pinto will never be a car that handles except in a straight line. A rear bar will usually make a Pinto tail happy and that's the one thing a V-8 Pinto doesn't need. Most people I have talked to don't run any bars on the front or rear of a V-8 Pinto and drive them with an egg on the gas peddle.
Its better to be a has-been, than a never was.

Rob3865

I had planned on taking pics and doing a how to on the link rebuild, but there seems to be a lack of interest.

Rob3865

It's a Ford Mustang II factory part. I have the old ones, so I may simply rebuild those with new bushings, or I am sure I can make the front ones work. They are very close.

dick1172762

Try   http://www.mustangii.net/forums/default.asp   It would really help if we knew what brand the rear sway bar is. Can't tell who the actors are without a program. If its a Mustang II bar, those links that go from the bar to the sub frame, haven't been around for 10 years or more. You can try  http://www.mustangiitech.net  has a tech on how to build them, BUT that site is down right now.
Its better to be a has-been, than a never was.

Rob3865

Does anyone have a source for rear sway bar links for the Bobcat/Pinto? I have easily found the mount bushings and brackets new, but the rear link kits elude me. I can get the front links new and may try to use those, but they are different and I wanted to use the correct parts. Thanks.