Mini Classifieds

Pinto Wagon
Date: 05/25/2018 01:50 pm
1978 fuel sendng unit
Date: 05/27/2020 09:54 am
77 pinto
Date: 08/22/2017 06:31 pm
Pinto brake booster needed
Date: 05/08/2021 09:00 am
78 fender and hood
Date: 03/23/2021 01:07 pm
1979 Pinto Sedan Delivery

Date: 06/15/2019 03:30 pm
2.3 pinto carb
Date: 08/18/2018 02:07 pm
76 pinto sedan sbc/bbc project for sale $1700 obo

Date: 03/27/2017 10:07 pm
1974 Pinto Drivers door glass and parts

Date: 02/18/2017 05:52 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,574
  • Total Topics: 16,267
  • Online today: 905
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 607
  • Total: 607
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

1975 Drag Car Wagon

Started by Madness, June 20, 2011, 10:21:49 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

WIV8Pinto

I don't know why any of you go-fast guys wouldn't want to buy my 1972 panel wagon...351W C4 and fast!!!! all done and ready to RUN ! ! ! C'mon guys ! ! !
1972 V8 Pinto Wagon 351 Windsor C4 4.88 gears...& hang on!!!!
Also 02 F150 4x4 and 96 Explorer sport 4x4

RSM

Wagons are great for drag racing. With the extra weight behind the rear axle, the weight transfer is much better than a sedan. That's partly one reason why my sedan got scrapped and the wagon got built. Gotta love seeing a nose up Pinto  :D


Madness

What class are you going to run? I am looking at the king of street... At some tracks they have a 8.5 and a 10.5. Due to the smaller nature of our cars I wanted to take advantage of the smaller tire class.

don33

I'm going to have to go to the Alaska Raceway Park website and read some rules. what class were you thinking about running ?

http://www.alaskaracewaypark.com/

Madness

the fronts are 14x6 and I keep forgetting to check the rear. I dont want to go wider than a 8.5" tire, just for class reasons.... When I get around to it i will paint the spokes a charcoal finish and re polish the outer edge.

don33

Hey Josh, that is one nice tire. whats the width ?... :)

Madness


don33

I am definitly on a budget, so there will be no tall block for me. no big buck build in my future.  more of the junk yard/used/modified and home fabbed approach... just like Josh is doing.......... ;) 

Bigtimmay

Anything can be built on a budget really. 302/351/LS1/ even the 2.3 Joe Morgan pulled 10's from his pinto with pretty much junkyard parts and a shot of nitrous to spool a big turbo off the line.

I don't really care how anyone goes fast and from what I see your on a good roll.Only thing I see in your build that I would change if it was mine is the engine I'm not that into 302s yeah they are nice if they are aftermarket blocks rather not have my block split cause I built it a little bit too much. but also I'm a firm believer in the 351W those 408s are tough to beat in anything from a street car to a drag car. An with boost a 408W is just insane this is what I plan on building for my 83 Ltd wagon.

Keep up the good work and blow the doors of some camaros and mustang and hopfully a few worthless vettes too! LOL
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

Madness

we can also talk about generating HP vs strait torq numbers...


Lets see...

1k on the dyno after about $15,000

I can have a built 347-- 800 or 900 hp for a third of that.

For a budget build you cant beat a SBF

Ok... I will break it down for you.

Car- 300.00
302 & C4- trade
Fuel cell and parts- 500.00
9" w/ Locker- trade
Hustlers w/ tires - 200.00
nitrous 150 shot - trade

So for about $1000, I can have a reliable racer that should be able to run 12s.

don33

Very good Josh, that sounds like a plan....    tell him Timmay........!!!!!!!!!!!!

Bigtimmay

Quote from: Madness on October 07, 2011, 06:55:38 PM
Don,
When I get around to builing my set of "Caltrax" I will build two sets. Just cost you some materials... They are really easy to make.

As for being familier with tail lights... There is no Replacement for Displacement  plus NOS!

Nope but there is the Esslinger tall block! LOL 3.0 of turbocharged fury would easily hit the 1k HP mark.  ;D
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

Madness

Don,
When I get around to builing my set of "Caltrax" I will build two sets. Just cost you some materials... They are really easy to make.

As for being familier with tail lights... There is no Replacement for Displacement  plus NOS!

don33



don33

I may try that, I know I saw a how to write up either on here or somewhere on the web ?

RSM

You can build your own set of Caltracks for a lot less than what they cost if your into building stuff. I plan on building my own set once my wagon is driveable.

don33

so are you going to get a set of caltracs for your car, ?  thats whats going on mine...  remember, you need to have that thing race ready by Memorial Day next year.  and you need to be down at Alaska Raceway Park in palmer,  after a few races you will become very familiar with what the tail lites of an 80 sedan look like....

Madness

I really like that wagon. Hopefully mine will be that nice some day. I found it on the Caltrax website.

Madness













Well I havn't been doing to much car work up here I am trying to get my garage dried in and ready for winter. However I have been collecting some parts...

WIV8Pinto

I have Hooker headers on my 71 pinto wagon, with a 351W motor...the tubes come apart for easier installation...they also wrap the frame...I would try to contact Hooker...Im sure they are still available...
1972 V8 Pinto Wagon 351 Windsor C4 4.88 gears...& hang on!!!!
Also 02 F150 4x4 and 96 Explorer sport 4x4

dave1987

Very cool!  :drunk: I want one!  :fastcar:
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

don33


Madness

Does any one have any experiance with a header kit that will work with my car? I had a line on some flanges and some pre bent stainless tube for a decent deal but the deal fell appart.

Madness

I picked this up the other weekend. I need the tranny but it looks like the 289/302 (haven't ran the casting number yet) ran really good. I might slide it in to get me roling and then I can take the time putting the cam and port and polishing my 351 heads.



Madness

Yep! I thought it was pretty cool.

don33

Pretty cool, can you buy those and run them with an up to date sticker on them ?

Madness


don33

heck yeah, anything you need from Anchorage brought up to you. just let me know....