25 years of Pinto/Bobcat know how. Become a member to search our archives. PCCA Store re-opening, more merch for everyone, https://www.cafepress.com/pcca
0 Members and 1 Guest are viewing this topic.
Hoses are in the same locations.
I hope it cures your temp issues. Keep in mind that if the AZ temps sill heat it up then a good fan & shroud can easily pull another 15 degrees out of it. Also your tranny lines may need some coaxing into place since the in/outlets are farther apart but this could be a good time to splice in a trans cooler after the stock one if you haven't already.
you guys are so lucky that thye make a radiator for your cars!! they dont make one for the v6 pinto/bobcats!!
Talk about fast shipping. I ordered it yesterday & it came today. It's 20" wide BTW & looks identical to Wittsends pic.Early 74's had the narrow early radiator support from the '71 to '73 cars so that maybe why Autozone says it won't fit. Considering the side extension on your original radiator I'd guess you have the late '74 radiator support so it should bolt right in. The 1st one went in my '76 wagon in 15 minutes so I know it fits. This one will either end up in my '73 sedan or I may have a '71 in my near future to use it in but those will need widened.