Current Classifieds

2.3 bellhousing stick
Date: 07/24/2019 06:50 pm
1971-1975 Pinto
Date: 01/09/2017 04:14 pm
hubcaps

Date: 05/13/2021 05:33 pm
pinto parts for sale
Date: 07/25/2018 04:51 pm
80 pinto original

Date: 08/04/2019 10:45 am
2.0 Cyl Head1973
Date: 11/29/2018 12:51 pm
I have a 1977 Cobra body lots of parts here
Date: 04/12/2017 06:57 pm
Crankshaft Pulley
Date: 10/01/2018 05:00 pm
76 pinto sedan sbc/bbc project for sale $1700 obo

Date: 10/27/2018 03:30 pm
NEED 77/78 MUSTANG II Left Motor Mount
Date: 04/15/2017 05:14 pm
1972 Rallye wagon rebuild
Date: 11/14/2020 07:31 pm
Pinto Wheel Well Trim
Date: 03/29/2017 11:35 am

Author Topic: Exhaust manifold egr port  (Read 482 times)

0 Members and 1 Guest are viewing this topic.

Offline Nudemaple

  • Pinto Member
  • **
  • Posts: 16
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 1
    Badges: (View All)
    Topic Starter
Exhaust manifold egr port
« on: February 27, 2020, 11:34:53 PM »
Finally decided to remove the heat shield covering the 2.3L exhaust manifold and saw what I was suspecting for a few years. A cracked manifold. Removed the manifold, EGR tube and downpipe and removed the crumbling manifold gasket. I was able to find an exhaust manifold via Facebook however the egr port and air diverter ports are plugged. Since I'm in California I have to unplug both ports to reconnect everything. The EGR tube is in tact and in good condition. I was able to remove the EGR port plug and I need opinions on which fitting will fit in there?  The fitting appears to be a 90 degree 1/2" NPT Female x 1/2" NPT Male like this one? Correct? Will the rotating male nut at the end of the EGR tube thread correctly into the female of this fitting? Or any other suggestions? Thank you.....

    https://www.amazon.com/Weatherhead-3400X8-Fitting-Degree-Female/dp/B00BKFD0X8/ref=sr_1_14?keywords=street+elbow+1%2F2+inch&qid=1582863566&refinements=p_76%3A1249158011%2Cp_85%3A2470955011%2Cp_n_feature_four_browse-bin%3A3052062011&rnid=3052033011&rps=1&s=industrial&sr=1-14