the parking brake set up is very common to other cars , simple to fix , first you have to make sure everything is there , sometimes someone has worked on the car and you can leave out a few parts and you have a problem with the parking brake , starting from the brake handel you will see a rod with two jamb nuts , the rod goes trough a rubber boot to the transmission tunnel , look under the car (right above the front driveshaft U-joint ) you will see the rod hooked trough a round braket and the one cable loops around it , if all is good have someone pull up on the brake handle while you look at the cable , both left and right cables should pull out the same , if one pulls out way more that brake may have missing parts , if the cable does not move much you will have to lossen the two jamb nut on the handle rod and run the nuts in , (shorten the rod , ) if that works keep turning them in untel the handle moves half way up and parking brakes are on , lock the two nuts back , your done hope this help for starters