Ok , what you have there is more than enough to change over , the center bracket that hold the clutch and brake pedal is the same in your car now , you have the worlds fastest change over , ten minutes or less , pull the clip on the right , slide the clutch pedal to the left , when it come out the brake pedal will fall out to , on your car you remove the spring clip the holds the brake switch and master cylinder rod to the brake pedal, then remove the clip to the right , pull the huge pin out , (clutch has pin made on it ) the old pedal will fall out , put new brake arm in place , slide clutch arm in , install clips and spring clip , the clutch cable snaps in hole on fire wall , install "U" shaped bracket on cable , hook the other end of bracket to top of clutch arm , Done , save all of the old parts in case one day you want to go back to auto transmission,