PINTO CAR CLUB of AMERICA

Shiny is Good! => Your Project => Topic started by: dennisofaz on July 13, 2019, 09:16:26 AM

Title: Sticky ignition switch
Post by: dennisofaz on July 13, 2019, 09:16:26 AM

I have a 74 Runabout and the ignition switch is starting to stick sometimes.  What can be done to fix the issue?  Thanks in advance for any suggestions.

Title: Re: Sticky ignition switch
Post by: TIGGER on July 16, 2019, 07:44:48 PM

Could be a couple issues.  Could be the switch on the column under the dash that is dirty or your cylinder is worn/dirty.  I would maybe first put some graphite or lube in the cylinder and see if that helps.  If not, maybe pull your steering wheel and drop the column and see if you can see where it is sticking at.  Everything is mechanical the key actuates a rod so that stuff might just need a good cleaning. Good luck to you.