Current Classifieds

1974 Pinto Drivers door glass and parts

Date: 02/18/2017 05:52 pm
1975 Pinto wagon emissions decal wanted
Date: 09/20/2018 11:01 pm
Need Brakes for 1971 Pinto
Date: 04/27/2018 11:48 pm
1600 CC WATER PUMP
Date: 06/02/2018 09:13 am
'79 Ford Pinto, Green,

Date: 10/29/2019 11:50 am
1974 Ford Pinto Squire Wagon

Date: 05/30/2020 01:51 pm
Wanted early pinto
Date: 10/03/2019 02:42 pm
Clutch Cable Needed
Date: 04/03/2017 10:54 pm
1972 Runabout 351 Cleveland V8

Date: 11/05/2016 09:03 pm
WTB: Ford Type 9 5spd Transmission
Date: 03/18/2020 01:30 am
74 Pinto wagon armrests
Date: 01/18/2017 07:04 pm
LOOKING for INTERIOR PARTS, MIRRORS & A HOOD LATCH
Date: 04/06/2017 12:13 am

Author Topic: Sanding Paint Prep.  (Read 1522 times)

0 Members and 1 Guest are viewing this topic.

Offline John Turner

  • Pinto Member
  • **
  • Posts: 56
  • FeedBack: +0/-0
  • Another Pinto Driver

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Fifth year Anniversary Apple User
Sanding Paint Prep.
« on: February 28, 2012, 01:44:34 PM »
I am going to have my 72 Wagon repainted.  I plan on doing the prep. myself.  I have a 5" random orbit sander (Porter Cable) used for woodwork.  Would you use this or should I buy a different one specifically for auto prep??  Thanks. jt

Offline dave1987

  • Pinto Sr. Master
  • ******
  • Posts: 3431
  • FeedBack: +25/-0
  • Gender: Male

  • Total Badges: 11
    Badges: (View All)
    Topic Starter Signature Tenth year Anniversary Poll Voter Mobile User Apple User Linux User Windows User 1000 Posts Fifth year Anniversary Photographer
Re: Sanding Paint Prep.
« Reply #1 on: February 28, 2012, 11:03:56 PM »
Personally I would do it all by hand, being a perfectionist.

However, my brother used a woodworking orbit sander on my 78 sedan before he repainted it. It came out pretty good but there are some spots that you can see swirling from the sander being pressed to hard or to coarse of grit used.

I wouldn't use anything less than 400 grit, then do again with 600 grit, finalizing with a palm sanding block and once more with 600 grit to ensure there are no swirl marks. This is how I may be doing my '73 wagon.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Offline dga57

  • Chief Moderator / Admin
  • FordPinto.com Moderator
  • Pinto PooBAH
  • ***
  • Posts: 7090
  • FeedBack: +208/-0
  • Gender: Male

  • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Topic Starter Signature Poll Voter Mobile User Windows User 1000 Posts Fifth year Anniversary
Re: Sanding Paint Prep.
« Reply #2 on: February 28, 2012, 11:32:00 PM »
Personally, I prefer a DA, then follow up with a jitterbug.
Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Offline popbumper

  • Pinto Master
  • *****
  • Posts: 1919
  • FeedBack: +100/-1
  • Gender: Male

  • Total Badges: 8
    Badges: (View All)
    Tenth year Anniversary Topic Starter Signature Mobile User Poll Voter Windows User 1000 Posts Fifth year Anniversary
Re: Sanding Paint Prep.
« Reply #3 on: February 29, 2012, 11:50:51 AM »
If you are painting over existing/repaired factory coat, scuff everything including your repair areas with 320-400 grit, and that will be adequate. This is the advice my paint shop gave me, and I have sanded the entire car by hand. The door edges and jambs that I painted turned out perfect - no sanding swirls or marks at all. The rest of the car needs painted, but it's off to a good start. These cars are not massively large, so hand sanding is a reasonable and achievable option.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

Offline carbomb

  • Pinto Member
  • **
  • Posts: 75
  • FeedBack: +0/-0
  • Gender: Male
  • Another Pinto Driver
    • yea

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Fifth year Anniversary Webmaster
Re: Sanding Paint Prep.
« Reply #4 on: March 16, 2012, 11:41:48 PM »
use 320 on a da keep it flat and always moving. Then seal it and paint it