Forum > Your Project
Project Warhead
warhead2:
Did some more light sanding, primed n undercoating on the rear spare tire area, also removed the muffler still along ways to go cleaning and undercoating
Sent from my SM-G965U using Tapatalk
warhead2:
Did some cancer(rust) removal to see how far some of it has spread. Have only the before picture of the rear passenger fender area. Will post later and after picture.
I know my cuts aren't perfect but more of exploring. Will make cuts better when i get my welder up and running. Fun part will be the wheel well area since there are 2 sheets of metal 1 inside and 1 outside
Sent from my SM-G965U using Tapatalk
warhead2:
Here is the after picture that i forgot on the post above. Also 2 pics of what i got done so far on the rear spare tire area.
Sent from my SM-G965U using Tapatalk
warhead2:
Another update. Still working on the underside. Using sanding sponges to sand the dirt type grit and lite surface rust. I finally finished removing the driveline attached to the axle, wasn't worried about it till now. Its in my way for sanding. Just removed the 2 u brackets.
Also removed the last exhaust hanger. Sanded,cleaned then primed the area between the spare tire and rear axle.
Also was pulling out old mouse nest debris thats inside the frame. Had to be careful lol was pulling stuff out and stabbed my finger on a 30yr old sticker. Found several more after that.
Sent from my SM-G965U using Tapatalk
warhead2:
Did a little more work today was able to Barrow a cherry picker and pull the engine had everything disconnected a while back was just sitting on the motor mounts. Bought a engine stand today also. Will get the engine on the stand this weekend once I buy some bolts to mount it to. Decided to remove the clutch and flywheel. The clutch was supposedly the reason the car was parked. Will post this weekend with an update. If anyone has any questions feel free to ask.
Sent from my SM-G965U using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page