PINTO CAR CLUB of AMERICA

Shiny is Good! => Your Project => Topic started by: jim72 on June 27, 2012, 06:43:37 PM

Title: B&M blower
Post by: jim72 on June 27, 2012, 06:43:37 PM

I realize this is a little off the beaten path, but I am looking for a small B&M( or Holley) blower for the small block windsor I'm putting in my latest build. Ideally a 144 or 174 is what I want.  Not looking to spend a ton of money,but I am a realist. Any thoughts/ leads would be much appreciated.

Title: Re: B&M blower
Post by: Pinturbo75 on June 27, 2012, 06:59:06 PM

http://www.racingjunk.com/Blowers/2625697/B-amp-M-174-blower.html
http://forums.corral.net/forums/power-adders/1278087-weiand-174-supercharger.html

Title: Re: B&M blower
Post by: jim72 on June 27, 2012, 07:50:44 PM

I saw that one, it is for a chevy small block   Thanks

Title: Re: B&M blower
Post by: Pinturbo75 on June 27, 2012, 08:57:50 PM

theres 2 links there,,,, one is definitely a ford.....

Title: Re: B&M blower
Post by: jim72 on June 28, 2012, 08:17:46 AM

Thanks pinturbo, The second one was for a sb ford - it is however an old listing-no longer available.

Title: Re: B&M blower
Post by: Gearhead on August 08, 2012, 12:26:53 AM

the 144 is for sbc, the only 174 is for sbf with the offset nose

Title: Re: B&M blower
Post by: jim72 on August 17, 2012, 04:54:41 PM

I  have a 144 b&m on the 302 in my fairmont . B&m did make a 144 for the small block ford as well, would like to find one for my pinto project.