Current Classifieds

74 Wagon Interior
Date: 01/22/2017 06:38 pm
2 liter blocks and heads
Date: 03/28/2018 09:58 am
1972-1980 Pinto/Bobcat Wagon Drivers Side Tail Light OEM

Date: 04/20/2017 10:10 am
A.c. alternator hrackets
Date: 09/03/2017 12:11 pm
2.0 Cyl Head1973
Date: 11/29/2018 12:51 pm
Wanted 1973 Ford right fender
Date: 06/03/2017 08:50 pm
Gas Tank Sending Unit
Date: 05/22/2018 02:17 pm
1973 Pangra

Date: 01/06/2015 02:19 pm
parting out 1975 & 80 pintos
Date: 08/24/2018 02:50 pm
1971 Pinto (survivor)

Date: 05/15/2022 04:42 pm
LOOKING for INTERIOR PARTS, MIRRORS & A HOOD LATCH
Date: 04/06/2017 12:13 am
1976 (non hatchback) pinto (90% complete project)

Date: 07/10/2016 10:17 am

« previous next »
Pages: [1]   Go Down

Author Topic: drag racer leaf spring rates  (Read 2499 times)

0 Members and 1 Guest are viewing this topic.

Offline don33

  • Pinto Sr. Member
  • ****
  • Posts: 280
  • FeedBack: +5/-0
  • Gender: Male
  • Another Pinto Driver

    • Total Badges: 4
    Badges: (View All)
    Topic Starter Fifth year Anniversary Poll Voter Windows User
drag racer leaf spring rates
« on: January 24, 2012, 01:09:45 AM »
to all the drag racers in the house. a question about leaf spring rates for drag racing  I see replacement springs offered in various rates.  100, 125, 150 and 175.  are the stiffer springs best for drag racing/traction...? what would you suggest ?
Logged

Offline don33

  • Pinto Sr. Member
  • ****
  • Posts: 280
  • FeedBack: +5/-0
  • Gender: Male
  • Another Pinto Driver

    • Total Badges: 4
    Badges: (View All)
    Topic Starter Fifth year Anniversary Poll Voter Windows User
Re: drag racer leaf spring rates
« Reply #1 on: January 25, 2012, 10:06:57 PM »
I know on a rear coil spring car they use stiffer springs, not sure on the leafs though...
Logged

RSM

  • Guest
Re: drag racer leaf spring rates
« Reply #2 on: January 26, 2012, 05:55:23 PM »
The weight of the car, gear ratio, tires (slicks or drag radials), auto or standard...it all factors in. Too stiff of a spring rate won't plant the tires hard enough for optimum traction and too soft causes issues. I haven't had my wagon to the track yet but i'm leaving the stock springs in it for now to see how they work. My sedan that I was racing before had stock springs with 1 or 2 leafs removed. Whoever set the car up knew what they were doing because that hooked like crazy. The springs were soft enough to plant the tires very well. I have some video on You tube and you can see how well the tires planted. Not knowing your setup it's hard to say exactly what might work for ya. 
Logged

Offline NoForKin

  • Pinto Full Member
  • ***
  • Posts: 163
  • FeedBack: +27/-0
  • Gender: Male

    • Total Badges: 6
    Badges: (View All)
    Topic Starter Mobile User Tenth year Anniversary Poll Voter Windows User Fifth year Anniversary
Re: drag racer leaf spring rates
« Reply #3 on: January 28, 2012, 04:48:54 AM »
 rear springs for drag racing are not the ideal set up for a pinto, ladder ber with ciol over shocks is what you need .   spring rate for coil over should be determined by weight of car
       NoForKin
      9.81@135.87 qtr mile
Logged

Offline don33

  • Pinto Sr. Member
  • ****
  • Posts: 280
  • FeedBack: +5/-0
  • Gender: Male
  • Another Pinto Driver

    • Total Badges: 4
    Badges: (View All)
    Topic Starter Fifth year Anniversary Poll Voter Windows User
Re: drag racer leaf spring rates
« Reply #4 on: January 28, 2012, 11:31:58 AM »
innitialy the car will probably end up weighing around 2300 lbs. figure around 450+ RWHP. it will have stock leafs, cal tracs, a C4 trans and most likely a 410 rear. this my most likely initial configuration.
Logged

RSM

  • Guest
Re: drag racer leaf spring rates
« Reply #5 on: January 29, 2012, 02:58:26 PM »
All you can do is try it unless you run across someone who has the setup your planning. Sometimes it's trial and error. How long before you have the car at the track?
Logged

Offline don33

  • Pinto Sr. Member
  • ****
  • Posts: 280
  • FeedBack: +5/-0
  • Gender: Male
  • Another Pinto Driver

    • Total Badges: 4
    Badges: (View All)
    Topic Starter Fifth year Anniversary Poll Voter Windows User
Re: drag racer leaf spring rates
« Reply #6 on: January 29, 2012, 07:03:32 PM »
shooting for may....
Logged

RSM

  • Guest
Re: drag racer leaf spring rates
« Reply #7 on: January 29, 2012, 09:11:48 PM »
I hope to be ready to make a run to the track by then as well.
Logged
Pages: [1]   Go Up
« previous next »