Thanks for the info...
I found the Smooth On and spoke to a rep and that was one of the resins i was considering..
He mentioned.cons
iderations about heat so i measured the temps of the mounts after driving about half an hour in 90 degree weather i measured 145 degrees on driver side and about 200-210 passenger side under the exhaust manifold.
After some research, i found these options for universal motor mounts
https://www.autozone.com/external-engine/motor-mount/p/duralast-engine-mount-2123/154237_0_0?vehicleId=1409201https://www.autozone.com/external-engine/motor-mount/p/duralast-motor-mount-2429/108977_0_0?vehicleId=1409201And i think i might try adapting one of these since they are rubber and one has mounting stud
molded in. And i thought about drilling the studded one and adding a "safety" bolt to replace the canle in the factory mount to limit stretching on the driver side which is under torsion load.
The other might be good for soms sort of bolt thru sandwich arrangement.