Forum > Pinto FAQ
MUSTANG II TECH
dick1172762:
Take a look at http://www.mustangiitech.net for many tech posting that work on a Pinto too.
Wittsend:
Hummm..., I took a quick look around and under Mods, Suspension/Steering found this:
After lowering the front of my car with a simple spring swap, I wanted to lower the back a little to level the car out and to also improve the stance of the car. I thought an inch would be enough but I was puzzeled about how to do it and didn't really want to spend alot of money doing it. After studying the problem for a bit, here's my solution. What I came up with is relatively easy and best of all it was free!
[/size][/color]
This was ALL the information and no additional link (nothing to click on), hence what you read above is all there is. I looked through a few more listings and others were similar in that the text was incomplete to explain the process, parts etc.. It was not all of them but it was a bit confusing. I know that sometimes when people create websites they make "placeholders" and maybe this is what some of the incomplete articles are???
dick1172762:
Take a look at the forum for "published tech articles" then go to "lowering the back of the II" Many pictures there.
Wittsend:
Wow, a lot more than shows on the surface. Thanks. Not sure why it take a "guide" to get you there though. You might want to add a little "navigation" to the first post.
dick1172762:
I know what you mean. I've been a member for a couple years, so its easy for me. I post there as Profile and they do have a lot of good stuff. I check it every day.
Navigation
[0] Message Index
[#] Next page