PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => Pinto FAQ => Topic started by: Curtis Hensley Sr on November 26, 2012, 08:55:48 AM

Title: Brake Pedal Question
Post by: Curtis Hensley Sr on November 26, 2012, 08:55:48 AM

I have changed from a stick to an auto trans and want to remove the clutch and brake pedal and run an auto trans brake pedal. What parts are needed for this change over. Will the auto brake pedal interchange with the stick pedal, or do I have to have the complete bracket and pedal assembly from an auto trans car? Any and all help is appreciated. Thank's, Curtis

Title: Re: Brake Pedal Question
Post by: Fred Morgan on November 26, 2012, 01:13:33 PM

Hi Curtis, the channel needs no change, just pedal only. It looks like you are running an 80 ? The only thing you need to know is it power brake or not, most likely it is power because of year and yes I do have what you need. A trade is welcomed.  Fred   :)

Title: Re: Brake Pedal Question
Post by: Curtis Hensley Sr on November 26, 2012, 02:00:14 PM

Thank's Fred. It it an 80 with manual (no power) brakes. I would like to put as wide a pedal on it as I can. Is there a difference in the width of the power vs non power pedal? May be wanting to swap a clutch pedal, clutch cable and non power brake pedal for the auto trans brake pedal.