Current Classifieds

1980 Pinto for sale

Date: 11/24/2016 06:32 pm
WTB: Factory air cleaner and fan shroud 1971 2.0
Date: 02/05/2020 11:06 am
72 pinto drag car

Date: 07/08/2017 08:53 pm
1980 pinto/bobcat floors
Date: 07/24/2018 08:11 pm
1976 pinto for sale

Date: 01/12/2017 02:08 pm
Looking for leaf spring insulators
Date: 04/04/2020 09:38 am
1979/80 Pinto needs to be saved
Date: 09/10/2018 10:41 pm
Need seals Pinto Wagon
Date: 02/16/2017 05:09 pm
Wanted 1971-73 pinto 2.0 4 speed manual transmission
Date: 03/06/2019 06:40 pm
2.3 turbo intake (lower)

Date: 07/15/2020 09:29 pm
Pinto Wheel Well Trim
Date: 03/29/2017 11:35 am
Radiator
Date: 05/27/2018 06:07 am

Author Topic: 2.3 head mods  (Read 4416 times)

0 Members and 1 Guest are viewing this topic.

Offline earthquake

  • Pinto Master
  • *****
  • Posts: 767
  • FeedBack: +4/-0
  • Gender: Male

  • Total Badges: 5
    Badges: (View All)
    Topic Starter Signature Tenth year Anniversary Poll Voter Fifth year Anniversary
2.3 head mods
« on: April 20, 2012, 10:55:11 PM »
This is a simple mod for the exhaust port on the 2.3.If you are running a header than you have had to deal with the air port in the floor of the runner exiting out under the flange of the header.I've tried alot of methods and while not the easy one it is the best.You will need a 3/8 16 tap 4 3/8 16 x3 in bolts jb weld,NOT jb quick a hack saw,large flat mill bastard file and a die grinder.
   The first order of business is to run the tap through the hole,no need to drill it out.Next you will need to angle cut the end of the bolt to the angle in the port.Now bung the threads on the bolt to help lock it into place. Mix your JB weld and apply it to the bolt close to the bolt head not on the end of the bolt,and thread it in the hole till the bolt comes through to the port far enough to be able to grind flush with the floor of the runner.Now let the JB dry. Now to finish it up.take a hack saw and cut the bolts off flush with the head,next you will need to take a large flat file and file the bolts flat to the side of the head.Now take a punch and stake the bolt in place,then refile.Now grind the bolt flush with the bottom of the runner and voalia a better flowing port and an exhaust leak point eliminated.I'm not the best at explaining how to do things but I hope with the pictures it will be easy to understand my rantings.
73 sedan parts car,80 crusin wagon conversion,76 F 250 460 SCJ,74 Ranchero 4x4,88 mustang lx convertable,and the readheaded step child 86 uhhh Chevy 4x4(Sorry guys it was cheap)

Offline Srt

  • Original Pangra Master Builder
  • PCCA VIP
  • Pinto Master
  • ***
  • Posts: 1339
  • FeedBack: +100/-0
  • Gender: Male

  • Total Badges: 10
    Badges: (View All)
    Topic Starter Signature Tenth year Anniversary Poll Voter Linux User Mobile User Windows User 1000 Posts Fifth year Anniversary Photographer
Re: 2.3 head mods
« Reply #1 on: April 21, 2012, 03:26:17 AM »
good job explaining the process.
the only substitute for cubic inches is BOOST!!!

Offline hydrodriver

  • Pinto Member
  • **
  • Posts: 23
  • FeedBack: +1/-0
  • Gender: Male
  • Another Pinto Driver

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Fifth year Anniversary Windows User
Re: 2.3 head mods
« Reply #2 on: April 28, 2012, 01:49:07 PM »
Nice job!  I tapped mine with a taper pipe tap, and screwed in steel recessed allen head set screws - works well but does not fill the hole the way your method does.  I am sure i will re-do mine in your method.
Thanks!

Offline ToniJ1960

  • Pinto Sr. Member
  • ****
  • Posts: 544
  • FeedBack: +13/-0
  • Gender: Female
  • Another Pinto Driver

  • Total Badges: 5
    Badges: (View All)
    Tenth year Anniversary Topic Starter Poll Voter Fifth year Anniversary Windows User
Re: 2.3 head mods
« Reply #3 on: June 20, 2012, 07:34:14 PM »
 is this totally necessary to put headers on or just for some headers? And is there another option thats reversible?