PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => Pinto FAQ => Topic started by: cromcru on November 03, 2012, 12:40:07 AM

Title: 1996 mustang front seat conversion
Post by: cromcru on November 03, 2012, 12:40:07 AM
today i bought both front seats from a 1996 ford mustang lx.andits  a direct bolt in on passenger side. driver side i had to drill out and tap tread the rear holes cause the seat had the electric seat adjuster also had to add some spacers to raise the seats due to interference of the 74 seat belts. otherwise very happy with the conversion.
Title: Re: 1996 mustang front seat conversion
Post by: Wittsend on November 03, 2012, 10:06:14 PM
Hi.  Any pictures?  I did the Turbo Coupe drivetrain swap and elected to use the same '88 T/C seats.  I had some issues and wound up putting the Pinto seat tracks on the T/C seats. That caused the loss of the electric functions.  Glad you found a better arrangement.
Tom
Title: Re: 1996 mustang front seat conversion
Post by: cromcru on November 03, 2012, 10:20:51 PM
ill have to take a pic from both sides. in a few days.