PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: PintoMan1 on May 22, 2012, 02:38:07 PM

Title: wheel well mouldings
Post by: PintoMan1 on May 22, 2012, 02:38:07 PM

is there anyone out there that can help me find a set of wheel well mouldings for the 71-73 pinto? i am lookin for both front and rear. would perfer nos, but a good set of used would work. i am looking to put them on a show car (please no dings or dents). can anyone help, please?

Title: Re: wheel well mouldings
Post by: JoeBob on May 23, 2012, 01:28:02 AM

There is a guy in Denver who tapped out about 50 dings from one of the wheel trims on my 77. It looks flawless. I would not have believed it if I had not seen it. I have 3 NOS and the one refinished. I can not tell the difference. He charged me $100 for the one repair. His company is called Ajax Custom Plating. 1423 South Broadway Denver Co 80210 303-777-8930
Hope this helps
Bill

Title: Re: wheel well mouldings
Post by: 289Wagon on May 23, 2012, 02:16:18 AM

 I looked up the part numbers and did a search of the sources I use. They are available but very limited with the left front being the worse with only one available.
 I doubt you will find 4 'perfect' ones- these are fragile and have been handled for 30 plus years.
 If you want the info I have, Email me --  hawker39@verizon.net
 Having bought 4 of them for my '76 wagon, I can tell you they won't be cheap !!
 I was not able to locate any of the rocker mouldings.    Rich

Title: Re: wheel well mouldings
Post by: PintoMan1 on May 23, 2012, 04:40:28 PM

thanks for the replys guys. every little bit helps!
 
rich, e-mail sent, thanks

Title: Re: wheel well mouldings
Post by: PintoMan1 on May 30, 2012, 10:31:34 AM

 i am in desperate need of the left front molding if anyone can help!!
 
 please, please!!
 
 

Title: Re: wheel well mouldings
Post by: 289Wagon on May 31, 2012, 05:11:41 AM

 I called that place in Iowa, the guy said he had already talked to you, but he hadn't looked for it yet.

Title: Re: wheel well mouldings
Post by: jim72 on May 31, 2012, 08:41:25 AM

Hi Pintoman1I have both left and right mouldings from a 72 that I have no use for. They are not 'perfect', but they are not all bent up either. You are welcome to them for the cost of shipping if interested.   Jim

Title: Re: wheel well mouldings
Post by: PintoMan1 on May 31, 2012, 06:58:33 PM

jim72, 2 pm's sent
 
 thanks

Title: Re: wheel well mouldings
Post by: PintoMan1 on June 12, 2012, 08:53:00 PM

still looking for the rear pair (both sides) and the left front one. anyone?
 
       thanks

Title: Re: wheel well mouldings
Post by: Alpine615 on June 13, 2012, 08:14:39 AM

I found this in the classifieds section...
 
http://www.fordpinto.com/classifieds/?sa=view;id=1905 (http://www.fordpinto.com/classifieds/?sa=view;id=1905)
 
$425 for NOS.

Title: Re: wheel well mouldings
Post by: PintoMan1 on June 13, 2012, 09:37:10 AM

i know i found that to. a little to pricey. i had found some nos pieces (all 4). i am just looking for some pieces to replace any if anything were to happen to them. thanks!

Title: Re: wheel well mouldings
Post by: 289Wagon on June 14, 2012, 06:33:26 PM

  The place in Texas where you got the Left front, shows they have a Right Rear.

Title: Re: wheel well mouldings
Post by: PintoMan1 on June 14, 2012, 07:17:26 PM

thanks Rich!