Author Topic: manual rack and pinion (Read 1513 times)

Qwerser · « **on:** January 09, 2014, 11:33:17 PM »

I want to replace my old leaky power steering with manual steering. I'm seeing all sorts of set ups, but what I'm wondering is, what exactly is the distance from the center line is, and what size diameter and tooth count is that spline?
I'm guessing 16" from center line and 9/16" spline with 26 teeth.
Tell me if I'm right and I'll go ahead and buy this one off the shmebay.

tbucketjack · « **Reply #1 on:** January 10, 2014, 02:47:05 AM »

Try Rock Auto

dick1172762 · « **Reply #2 on:** January 10, 2014, 09:29:06 AM »

When I was road racing Pintos in SCCA, we used the power racks with out the power. Just hook the inlet to the outlet on the rack with a piece on hose and your done. This gives you quicker steering too. Try to fill the hose with oil before installment. Worked for me.

amc49 · « **Reply #3 on:** January 19, 2014, 12:07:23 AM »

I have done the same as well. Don't fill completely with oil, just enough to keep it really lubed up, leaving a bit of space lets the two sides equalize and breathe back and forth easier. Less effort that way too.