PINTO CAR CLUB of AMERICA

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: Reeves1 on June 19, 2013, 07:54:08 AM

Title: D9ZC-7515-BA clutch fork
Post by: Reeves1 on June 19, 2013, 07:54:08 AM

Been trying to find one. Got one ?

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on June 19, 2013, 12:43:55 PM

Have you tried a 5.0 fork in it? That fork fit my D9 bell perfectly

Title: Re: D9ZC-7515-BA clutch fork
Post by: Reeves1 on June 20, 2013, 01:03:39 AM

You have one you can take measurements from ?

I'll do same with the one I have (need 2 total) tomorrow.

Title: Re: D9ZC-7515-BA clutch fork
Post by: Reeves1 on June 20, 2013, 07:56:29 AM

http://www.npdlink.com/store/catalog/Mustang_Clutch_Linkage-6190-1.html

Might work ? I sent them an e-mail.
Off to the shop now....

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on June 20, 2013, 09:41:40 PM

Summit sells one for 20 bucks. That's where I got mine. Mine is buried in my storage but I did check the fit in my D9 bell a year ago & it was perfect.
 
http://www.fordpinto.com/pinto-faq/comparison-between-d5-d9-direct-pull-bellhousings/ (http://www.fordpinto.com/pinto-faq/comparison-between-d5-d9-direct-pull-bellhousings/)

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on June 20, 2013, 10:32:04 PM

http://www.summitracing.com/parts/atp-za125/overview/ (http://www.summitracing.com/parts/atp-za125/overview/)

Title: Re: D9ZC-7515-BA clutch fork
Post by: Reeves1 on June 21, 2013, 12:40:25 AM

Cheap !
Ordered it !
 ;D

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on June 21, 2013, 08:56:49 PM

Cool  8)

Title: Re: D9ZC-7515-BA clutch fork
Post by: Reeves1 on July 03, 2013, 03:36:36 PM

Quote from: Pinto5.0 on June 20, 2013, 10:32:04 PM

http://www.summitracing.com/parts/atp-za125/overview/ (http://www.summitracing.com/parts/atp-za125/overview/)

Same, except made in China.
Never mind the bubbles in the weld on the blue one (will be re-done). Also, that welder will be given back to the neighbor/owner. I bought a new one that works right.

(http://img.photobucket.com/albums/v140/DerrickJB/Yellow%2072/IMG_0241_zpsc608037a.jpg) (http://smg.photobucket.com/user/DerrickJB/media/Yellow%2072/IMG_0241_zpsc608037a.jpg.html)

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on July 03, 2013, 08:58:56 PM

I knew it would work. Only difference is the hole is larger than the Pinto cable ball but it's an easy fix.

Title: Re: D9ZC-7515-BA clutch fork
Post by: Reeves1 on July 04, 2013, 01:02:44 AM

My fix for the blue one was to cut that small piece out of a Pinto fork & weld it in.

You have other ways to fix ?

I got another Pinto fork to cut up....

Title: Re: D9ZC-7515-BA clutch fork
Post by: Pinto5.0 on July 04, 2013, 10:13:13 AM

Most guys just cut a slot in a washer that has a small hole after cupping it with a ball peen hammer & weld it in