PINTO CAR CLUB of AMERICA

Shiny is Good! => It's all about the Turbo... => Topic started by: L.D on June 11, 2013, 10:27:54 AM

Title: radiator and fmic
Post by: L.D on June 11, 2013, 10:27:54 AM

picking up a 86 merkur motor and trans for my 71 what radiator and fmic are you guys running.

Title: Re: radiator and fmic
Post by: Pinturbo75 on June 11, 2013, 11:06:18 AM

stock radiator and npr intercooler..x 2 pintos

Title: Re: radiator and fmic
Post by: OhSix9 on June 11, 2013, 07:12:59 PM

explorer 4.0l aluminum multicore rad on made brackets. custom fmic . single sided in and out all piped down passenger side

Title: Re: radiator and fmic
Post by: D.R.Ball on June 11, 2013, 10:24:59 PM

Stock rad and maybe a stock Cosworth inter cooler that I've had since 2007.

Title: Re: radiator and fmic
Post by: don33 on July 21, 2013, 03:09:17 AM

Explorer rad and big NPR intercooler.

Title: Re: radiator and fmic
Post by: Alpine615 on July 23, 2013, 11:16:09 AM

For you guys that have FMICs:  what are you doing to cool the trans oil? Stock oil cooler?

Title: Re: radiator and fmic
Post by: fast64ranchero on July 24, 2013, 07:45:07 PM

Stock radiator with the upper hose connection moved to the op. side, front mount intercooler (Big GodSpeed for and Mustang) with inlet and discharge on same side,  mine is a 71 also.  stock in rad. tranny cooler.

Title: Re: radiator and fmic
Post by: Alpine615 on July 24, 2013, 08:12:22 PM

I realized when I read your answer I meant "power steering cooler" instead of "trans cooler"...  //forehead smack//

Probably can be mounted on the lower outside of the rad support, provided the FMIC doesn't dip down too far, right?