PINTO CAR CLUB of AMERICA
Shiny is Good! => It's all about the Turbo... => Topic started by: 82expghost on January 24, 2014, 12:42:28 AM
-
im almost done making my new harness, but, when reading the wiring scems, where is the coil signal wire? i thaught the la3 controls timing when you hit the premium fuel switch, so if it does, then there would need to be a coil signal from the ecu, i was thinking the tach wire coming from the ecu, but that doesnt seem right?
-
The coil is fired by the PIP in the dizzy sending a signal to the coil. The Ecu controls the timing through the wiring to the TFI module and the spout make sure has a pillconnector/connector so it can be un-hooked to set timing.
When the spout is unhooked it has locked timing so im gunna go ahead and say that's your wire your talking about.
-
that makes so much sense, thank you, i will be sure to put a small conector on that wire, i was also wondering how to set timing on something like that, but you answered my question on that also