Mini Classifieds

72' hatchback parts wanted
Date: 08/25/2019 02:57 am
MISC PINTO PARTS

Date: 08/27/2017 10:23 am
PINTO TRUNK LATCH & CATCH

Date: 03/23/2018 09:39 pm
78-80 Windshield
Date: 10/29/2021 03:11 pm
1979 Ford Pinto for Sale - price reduction

Date: 01/23/2023 02:22 pm
Bumpers
Date: 07/06/2018 04:47 pm
Ford 2.3 Bellhousing C4/C5 & Torque Converter

Date: 07/08/2022 11:51 pm
t-5 2.3 trans and new flywheel cluch and pressure plate though out bearing for sale
Date: 09/09/2018 03:22 pm
1600 CC WATER PUMP
Date: 06/02/2018 09:13 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 624
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 625
  • Total: 625
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

71 V8 swap-let the fun begin!!

Started by 71pintoracer, April 16, 2008, 09:25:18 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

71pintoracer

Thanks guys, but I can't take credit for the hood. That is brother Bill's pet project, I just helped. He is a great (semi-retired) body man and is fantastic at fabrication. In fact, this entire project came together as well as it did because of his help. I owe him a big THANK YOU!!
If you don't have time to do it right, when will you have time to do it over?

dga57

You absolutely amaze me, Jimmy :amazed:
I can't wait to see this is person!  Hope we're still on for this evening... I'll call you sometime this afternoon!
Dwayne :smile: 
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Smeed

Thats a mean looking car! There is one problem though, I dont think many people are going to be passing you. They will never see the front end of the thing!  :fastcar:

'73 runabout

71pintoracer

Then we used a coat of fiberglass and smoothed it out with split second body filler, and a few coats of white primer. Next it will be blocked, sealed and painted with base coat and cleared. Looks easy but it took us about 7 hours of measuring, cutting, trimming and trial fitting to get to this point!  :P Looks good though, I'm very pleased with the way it turned out.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

We used a high strength bonding epoxy to glue it to the Pinto's hood....and I used a gas shock to hold the hood up because the '71-'73 prop rod goes across the front of the radiator support
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Got the hood pieces molded together, hope to get some paint on it this week. Here are some pics
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Went to the junkyard Saturday, got the outer skin of a fiberglass mustang hood, we are going to use the center section of it and mold it to the Pinto hood. The plan is to cut the entire center out of the Pinto hood, make a flange to set the Mustang section in  and mold it in. I'll post pics along the way. Here are the two hoods. If you look closely at the Mustang hood you can see where the front is damaged, it was split on that corner and across the front so we just peeled it off and left the bottom piece on the car. since it wasn't any good to sell we got it free.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

This picture gives people behind me some idea of whats in store  :hypno:
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Thanks for the kind words Dwayne, nice to meet you too!
I have been driving the Pinto for a few weeks now and so far everything is working great. It runs, idles and drives very well, I drove it when the heat index was 105 degrees and it never went over 200 degrees even when idling in traffic. I can feel the extra weight of the V8 in the steering like in parking lots but it is not bad at all. On the road it is fine, it handles very well. I swapped to disc brakes years ago and it stops good. The power of the V8 is awesome. This thing will hit 100 at the drop of a hat and it is very stable at any speed.
Here are the latest pics...
If you don't have time to do it right, when will you have time to do it over?

dga57

Good morning all!
I just got home after getting and "up close and personal" look at 71pintoracer's Pinto this morning.  Let me tell you, friends, the pictures he's been posting do NOT do this car justice.  It is one s-w-e-e-t looking ride!!!  He has that V-8 installed so neatly that it looks like it has been in there forever! 
Nice meeting you, Jimmy, and thanks for the tip on the body man.  I'll make a point of talking to him soon.
Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

71pintoracer

Man i"m really having a blast driving my Pinto!!  ;D ;D This thing kicks butt!! The great thing is it runs and drives smooth as silk but its got gobs of power. I haven't been running it all that hard, just enjoying driving it again. However...I have opened it up a little a time or two, and I've been itching to make a time run to see how it does even though the street tires are no match for this engine. So, I set up the G-meter and hit a lonely half-mile straight stretch of road with a 1/4 mile that I just happen to know where to start and stop.  ::) I took off fairly easy then nailed it, tires spun through first gear, I granny shifted at 5500 RPM and spun through second gear, I'm thinking man my 60' time is going to zoop! Hit third and finally got hooked up and sailed through the 1/4 mile mark in fourth just as the shift light came on. As I shifted to fifth to let the car slow down I glanced at the speedo to see it make its way back to 110. Wow! The G-meter showed 12.75 @ 120.3 MPH. I'm shocked to see 12's with the way it spins in 1&2. This baby's gonna be bad fast with 10" slicks!! And there's still that bottle in the trunk... ;) Oh and BTW, people have been asking how much horsepower it has, I guessed around 275. Guess what the G-meter read? 275!!  :surprised:
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Thanks Pintony, that means a lot coming from you, your Pinto's are beautiful, showcased by the attention to detail. I wanted this engine to look like it belonged there, not just a bunch of stuff thrown together. My brother and I spent a lot of time making parts and pieces and brackets so they look good. For instance, I spent 3 hours making the throttle linkage bracket. I've seen some pretty nasty looking swaps and one of my pet peeves is a big nasty looking radiator hanging down in front of the car where the valance used to be. I trimmed the valance a little and put it back on, and the air dam went back on with no modification at all. i painted the radiator flat black to match the rest of the black on the car and you can't see the radiator. I will post some more pics when I get it all cleaned up. We made the exhaust and put it on, I put short glass packs on it, sounds good. It's really not that loud untill you stick your foot in it! At this point, everything is done except the hood, I am going to drive it without one for now. We are going to hit the junkyard and look at some hoods, big brother is talking about grafting the center of a GT Mustang hood on to the Pinto hood. if you all remember, there is an offset hole in my hood where the scoop stuck through on the 4-cyl. I have 4 other hoods but we are going to play with this one first.  I have put about 25 miles on it so far and all systems are go, so I'm drivin' it!!  ;D ;D 
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

oops, put the same one in twice, here are some more
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

here are some pics...
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

This swap is in the final stages, I am in the process of changing the front springs, the added weight of the V8 dropped the front about 2". Since the car was already lowered 2", well it's a little too low!! I am going to pop in a set of stock springs first and see how that works, I also have a set of V6 w/ A/C springs if needed.
I need to modify (there's that word again!) the valance and air dam and get them back on, and I need to do something with the hood. For some reason that hole for the carb scoop doesn't quite line up!  ::)
more pics are on the way...
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Hmmm, lets compare;
4 cyl w/ 12 1/2 :1 c.r.
5 gal high test     $22.50
5 gal racing fuel  $40.00
total                    $62.50

V8 w/ 9:1 c.r.
10 gal 87 octane $40.00

The 4 cyl got about 15-18 MPG
The V8 should get about the same (if I keep my foot out of it-yea, right!!)
I think I will still come out ahead  :D  :lol:
If you don't have time to do it right, when will you have time to do it over?

Jinxter

Dude - No laughs here!  Awesome quick-fix!  If it works, Do it!  I've got at least one of those rubber coils sitting around, too!  Too bad I'm too far out for that option at this point...

Quote from: 71pintoracer on July 06, 2008, 06:43:11 PM
Yes I did, and don't laugh because it works great! You know those big blocks of rubber that you put in coil springs to raise the car up? Thats what I used. Advance Auto sells two sizes, I got the large ones,(six bucks a pair) they are about 2-1/2 to 3" square and 2" thick. I cut them in half on my band saw so I have a 1" thick block between the engine and frame mounts and then put the other piece on the bottom. I used bolts with just enough threads to squeeze them together a little and allow the engine to flex. I also used a large washer with a small bolt hole on the bottom to cover the entire block. Like a body shop "fender washer" but more heavy-duty. The engine moves slightly when you rev it and it's smooth and vibration free.
Beat it to fit, paint it to match...

71pintoracer

Well, I drove the Pinto on July 4th for the first time in about 2-1/2 months, and all I can say is WOW!!  :amazed: I don't have any exhaust yet but I live in the country and I don't think the cows minded at all! Took it easy up the road to make sure everything was working properly, it drove good, steered, shifted, braked and handled good, nice and smooth! After about 10 miles I turned around on a nice straight stretch of road. Eased off in first gear and then punched it. The tires spun, the tach jumped and the shift light flashed in an instant. I grabbed second, felt it go a tad sideways, shift light flashed, hit third, spun a little more and finally found traction. Man what a ride!!  ;D
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Yes I did, and don't laugh because it works great! You know those big blocks of rubber that you put in coil springs to raise the car up? Thats what I used. Advance Auto sells two sizes, I got the large ones,(six bucks a pair) they are about 2-1/2 to 3" square and 2" thick. I cut them in half on my band saw so I have a 1" thick block between the engine and frame mounts and then put the other piece on the bottom. I used bolts with just enough threads to squeeze them together a little and allow the engine to flex. I also used a large washer with a small bolt hole on the bottom to cover the entire block. Like a body shop "fender washer" but more heavy-duty. The engine moves slightly when you rev it and it's smooth and vibration free.
If you don't have time to do it right, when will you have time to do it over?

Jinxter

On your engine mounts - Did you end up putting any kind of vibration isolator between the frame and the engine?  If not, how is the vibration level?  I'm not entirely comfortable with the metal-to-metal bolt-up deal...

Quote from: 71pintoracer on June 20, 2008, 08:39:06 PM
The engine sitting in the car.

Beat it to fit, paint it to match...

beegle55

Congrats on getting it running. Your progress looks great and I hope it continues to go somewhat smoothly.  :2fast4u:  8)

    -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

dga57

Way to go Jimmy!!!  I'm looking forward to getting a chance to see that gorgeous Pinto one of these days!  I'll probably be around your work soon - got a recall notice on the top mechanism on my convertible - will bring a few photos of my Pinto and try to connect with you.
Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

71pintoracer

YES!! IT RUNS!!  ;D  ;D  ;D Fired it briefly the other night just to hear it run, Sounded great! I only let it run for about 10 seconds since I didn't have the radiator hooked up yet, but I did get to rev it a few times. Then I loaded it on the trailer for a trip to Advance to match up radiator hoses and a fan belt. Saturday was spent getting that all hooked up, put the new carb on, (race prepped and dyno tuned 600 Holley) and some nice looking Ford Racing valve covers. Then I got to let it run for a good 15-20 min. Everything seems good, no leaks or problems. Now it is just a matter of finishing up. I need to shorten the driveshaft 3-1/2" and a list of other minor details. If all goes well I may be able to go for a test drive saturday. I will get some more pictures soon.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

A few more...
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

The engine bay cleaned up and painted. Note the radiator support notched for the radiator cap.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Some pics of the headers.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

The engine sitting in the car.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

The reworked transmission mount. And BTW, the shifter sits in almost the exact same place as the 4 speed since the engine was moved back using the MII oil pan.
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

OK guys and gals, how about a long overdue update? The engine is in for the final time and parts are going on. I hope to get it fired up soon, maybe this weekend. Here are some pics.
This is the reworked  firewall
If you don't have time to do it right, when will you have time to do it over?

71pintoracer

Thanks for the pics Bobscat! Work is progressing pretty well, the frame mounts are welded in and smoothed up, the engine mounts are done and the radiator brackets are fabbed. The engine is out for what I hope to be the last time. The engine bay is being sanded and prepped for paint. I will have some more pics soon. Here are a few differences between the early ('71-'73) and late (74-up).
                On the late body style
The brake lines are already moved up on the fender apron
The fuel lines run outside of the frame rail instead of inside
The throttle cable is the right style although I found a long and short cable, not sure what year they came from, I put the longer one on my car.
More to come... 8)
If you don't have time to do it right, when will you have time to do it over?