Mini Classifieds

2.3 engine mounts,glove box parts,emblems,hatch,doors,hinges etc
Date: 08/26/2018 06:35 pm
77 Caliper Bolt
Date: 08/21/2018 04:02 pm
78 pinto wagon

Date: 06/04/2020 12:42 pm
80 pinto original

Date: 08/04/2019 10:45 am
Two 1978 Pinto Station Wagons

Date: 05/18/2025 03:10 pm
Rear Bumper
Date: 07/26/2021 01:08 pm
Looking for front seats
Date: 08/10/2021 09:54 pm
2.3 bellhousing stick
Date: 07/24/2019 06:50 pm
Bumper, grill and fender wanted
Date: 12/24/2016 04:13 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,582
  • Total Topics: 16,269
  • Online today: 2,399
  • Online ever: 2,944 (Yesterday at 11:57:36 PM)
Users Online
  • Users: 0
  • Guests: 811
  • Total: 811
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Question For Racers

Started by gpinto2, November 16, 2003, 04:19:44 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

strat6pony

I run the Open Comp class with the Pacific StreetCar Association.Hopefully we'll have our pinto done by early fall this year.

krazi

me and my group of friends get together on saturday nights when it's warm out and we drag race our bicycles. here's a link to our site.
http://bikeclubx05.tripod.com/

krazi
yeah, I'm Krazi!

jamnjm

I use to race at Irwindale speedway (the IS race director and I don't see eye to eye....) in the mini stocks with a '76 Mercury Capri 2 but most are Pintos: www.LAracers.com Irwindale Speedway, any mini stock race date. I'm in #54 and #66 car owner is my race engine builders car.

I'm going road racing this year some with www.touringcarclub.com with the Capri. I have a gutted Pinto here (engine builder's....) and I might build that for a full on road racer for next year.

pintoracer02

I race an 80 pinto at north vernon Indiana.  Its a high banked 3/8 mile dirt track.  I also race at salem Indiana in the rookie class.  My dads takin the car I built last year and I'm building a new pinto for next year.  There aint to many pintos left around here.  there all rusting away in some ones backyard so at our track 79-93 mustangs are more popular.  There are a couple of vegas that run up front over here though.  I wish they would make a V8 class for pintos mustangs and camaros or vegas but they dont want to start anymore classes at our track considering how late they race into the night already.
Bass Ackwards

stud_1991

Im a 14 year old racer looking for a new pinto and a 502 cam can any one tell me where to look and how i could set it up im a dirt track racer. If there is anyone her from CA will u right back because you get new stuff befor kansas.

PaulHolcomb

Actually I do 1/4 mile circle track racing on the Fastest 1/4 mile oval in the world, I-25 speedway in Pueblo, CO.  We are running 14 sec lap times with a stock rod 2.4L and Holley 4412 2bbl.  Come down to Pueblo and see the mini stock racing.  Go to http://www.i25speedway.com for more information.

turbopinto72

1/4 mile drags. 11.8 @ 117
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

mattfx

We are currently racing a '79 pinto coupe at various local dirt tracks.  My wife, LuLu is the driver.  She ended up 2nd in points for mini stocks at Bakersfield Speedway last year.  We ran 22 races last year and 11 so far this year.  This is basically a stock class and is usually about 30% Pintos.  Bakersfield Speedway, our primary track, is 3/8 mile and LuLu runs it in the high 18 seconds.  We use second gear and a 3.55 8"  and hit 6500-7000 RPM at the end of the straightaways.  Lots of fun.
'79 Pinto coupe 2300 dirt track pony stock

econoaddict

I will be a regular at the strip in woodburn, oregon.
The way things are going I wont be running until next season :(
To many projects for others and not enough time for my own.
'75 pinto very soon to have
302, C4, maverick rear

PINTO_RACER

sorry guy lost password for a while and had surgery so racing in 2005 is OUT.....most cars I have are 74-80
we call them 2cnd genration pinto's... when I start stipping one out for a stock car I will post one here...
99% of these cars are not safe for highway use so that is why they are in the stock car section.. if they was drivable I would be driving them can't find one around here to fix up....

fredericktown mo...
collection 74-80 pinto's for the last 3 years
13 and counting...

pondmullet

 ;D   Im in the process of building a 1980 Bobcat asphalt circle track car....right now im driving a 72 Datsun 210 which i got for 300 bucks.



Cliff

PintoBro

Quote from: PINTO_RACER on August 02, 2004, 03:32:18 PM
circle track missouri have 12 parts cars laying in the back 40  ;D we 4 pintos 1 mustang II and a fox body mustang along with a couple of chevy s-10's and a nissan

Would you happen to have a drivers lower door hinge laying around, in good shape? PM me if you do, with a price w/shipping to Central PA.
Pintobro
71 Pinto 306 10.0:1 351w heads
Comp Cams: .554/.558 lift .294/.306 duration
Torquer II Intake - Holley 750 HP
Sepanek's Racing Transmissions C4 (Full Manual)
8" rear (4.62 spooled)

PintoBro

For 2004, we'll mainly be doing Test & Tunes. Had it to the track at the very end of the season last year. With a basically stock bottom end (only thing changed was bored .030 over), stock heads (with new valve springs), Torquer II Intake, Holley 750 HP, and built up C4 tranny, it ran a best of 13.217 @ 100.??. See my signiture for some of the changes we made so far. Haven't had time to take it to the track since the chnges, so I don't know for sure what it'll run. From a couple blasts down a back road, it sure felt like a possible low 12. I'm hoping to get some free time in the near furure so I can take it to the track. I'll post the results here when I get back from the track, but not sure when it will be.
Pintobro
71 Pinto 306 10.0:1 351w heads
Comp Cams: .554/.558 lift .294/.306 duration
Torquer II Intake - Holley 750 HP
Sepanek's Racing Transmissions C4 (Full Manual)
8" rear (4.62 spooled)

dick1172762

Where in Missouri are you at?

Quote from: PINTO_RACER on August 02, 2004, 03:32:18 PM
circle track missouri have 12 parts cars laying in the back 40  ;D we 4 pintos 1 mustang II and a fox body mustang along with a couple of chevy s-10's and a nissan
Its better to be a has-been, than a never was.

vonkysmeed

rear axle on the MII (8")?  Could use one on my projet racer. 

Auto x and drag to try to get into a magazine.  Will have more info as the date gets closer
73 Pinto Runabout
351w from 74 galaxie
Heads from 69 Mercury Cougar
82 Mustang GT SROD Transmission and driveshaft
Mustang II rear end with Fairmont 3rd member
6 point cage

Poison Pinto

Hey, would you happen to have some of the following parts on a Pinto parts car from your back 40:

Interior door handles (need 3; or at least 1 from a Pinto and 2 that match and will work on a Pinto);
Grille for 71-74 Pinto (if the grille is complete but cracked in two, that's okay...or if nothing else, at least the turn signal housings from the grille);
The passenger side headlight housing (the metal piece framing the headlight that's the same color as the car).

Will gladly pay reasonable price and shipping to north-central/-western Kansas.

Thanks

I left my Pinto in front of my house last night. This morning there were two more left with it.

PINTO_RACER

circle track missouri have 12 parts cars laying in the back 40  ;D we 4 pintos 1 mustang II and a fox body mustang along with a couple of chevy s-10's and a nissan
collection 74-80 pinto's for the last 3 years
13 and counting...

alkypinto

We run about 30 events a year with the Alky Pinto
all around the midwest. We raced IHRA Division 3
Hot Rod, selected Ford events, and some local big
bucks bracket races this past year. We're still working
on a schedule for 2004, but due to other commitments
we wont be doing Hot Rod in 2004. We plan to do
Norwalk & Cordova FFW, Joliet NMRA, Columbus Ford
Expo, Gateway World Ford, Norwalk Halloween
Classic. Plus try to make some local Quick 16 shows
at Joliet if the new motor is fast enough. We'll also
be doing a lot of Tue night T&Ts at Joliet to get the
new motor sorted out.



Underdog76

Now That's a Question!!
Well first off Drag Racing is the closest thing that I have to religion. I am even planning to have the owner of the track officiate my wedding!!! I am the crew chief for Sly Willy Racing. Our team consist of,  "Sly Willy", my dads 12.4 second 302 ci 71 coupe, and my "projects", "Underdog"  my <6.4 second 500 ci blown 76 promod wagon, and "Riff Raff" my 454 ci stroked and blown 351w 73 pro street wagon. All of these race or will race at Alaska Raceway Park in Palmer Alaska their website is akracewaypark.com. Sadly there are no racer pic's yet, But I think that it has the best view of any track, look on the site and tell me if you agree.
Fast as lightning, strong as thunder

72 sedan

I'm setting the car up for streetable 10 sec bracket racing. When it's done, I'll be hitting the track in palm beach, Fl.
Look alive SON, You're about to get your butt kicked!

79Minto

I plan on taking my Pinto once it's complete up to SIR in Saskatoon,Saskatchewan and race it in the HIgh School Drags.

gpinto2

How many racers do we have here? What kind of racing do you do?Where do you race?What are your racing plans for next year?Let us know your plans,you never know who might come out to see you race
1972 Pinto 410,C-4