Mini Classifieds

1976 Ford Pinto Pony
Date: 09/06/2018 05:40 pm
Many Parts Listed Below
Date: 04/20/2018 11:15 am
1978 FORD PINTO PONY FOR SALE 17.000 MILES !!!!!!!!!!!!

Date: 06/25/2021 12:59 am
ISO instrument panel 80 hatchback
Date: 04/20/2017 08:56 pm
wanted a 1979 Pinto or Bobcat front valance
Date: 03/17/2019 10:15 pm
WTB. Seat cover or material LFront
Date: 07/01/2019 03:17 pm
71-73 Pinto Parts

Date: 06/06/2019 10:47 am
Plug Or Cover For Hatch Hinge Bolt For 1979
Date: 05/28/2017 03:20 pm
Sunroof shade
Date: 06/19/2019 01:33 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,588
  • Total Topics: 16,268
  • Online today: 155
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 144
  • Total: 144
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Pinto Powered Mustang Roadster

Started by rob289c, July 19, 2020, 06:19:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

davidpinto

THEY ARE ALL STOCK REPLACEMENT PARTS ,THE NEW RACK FITS PINTOS & MUSTANG IIS WITH 1 3/4 INPUT SHAFT LGTH.
D BARHAM

rob289c

Glad it went off without a hitch.  Are all your new steering parts "stock" Pinto or T-Bird or other "kit" components?  Nothing on mine seemed to be bolt-in ready. 
rob289c

davidpinto

I JUST REPLACED THE WHOLE STEERING SYSTEM ON MINE. `NEW ' RACK , PUMP AND ALL HOSES AND OUTER TIE RODS.THE OLD RACK FELL RIGHT OUT BUT THE NEW RACK WOULD NOT GO IN UNTIL I RAISED MOTOR UP .THE BODY WAS CONSIDERABLY LARGER DIAMETER.I MADE A BLEED TOOL OUT OF A 2 INCH RUBBER FREEZE PLUG ``PICTURED ''. PURGED ALL THE AIR OUT WITH MY VACUUM PUMP AT 45 LBS,CYCLED THE WHEEL A COUPLE TIMES,WORKS JUST PERFECT.DRIVES GREAT!
D BARHAM

Wittsend

Quote from: rob289c on May 10, 2023, 07:33:04 PM
... and Sunday will be devoted to Mother's Day:  Mom, Wife, and Mother In Law. 

Yea, that is one day you don't want to mess up. It could affect your car hobby for the rest of your life!

rob289c

Yesterday I dropped off my power steering lines and today I picked them up.  Flare ends were installed at the rack end, just like I needed!  I loosely fit them to the rack and the pressure line to the pump and the return to where the cooler will mount.  The routing seems odd.  the pressure line essentially goes vertical from the rack, then to the left, then turns inboard to the pump.  I don't remember how they ran when I disassembled the car so maybe they are correct.  Since there is no inner fender to attach them to, it may make them look like they are routed incorrectly.  As long as they don't leak or impinge on anything else, I will be pleased.  I don't think I will get much time on it this weekend.  I have some other must do chores on Saturday and Sunday will be devoted to Mother's Day:  Mom, Wife, and Mother In Law. 
rob289c

dga57

Quote from: rob289c on May 07, 2023, 05:47:02 PM
I'm glad to be back on it. I hope to make good progress this Summer. 

I'm glad to see you back at work on it as well, and I share your hope for making good progress!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

I finally spent a little time on my project after a long Winter!  I didn't do much but it's the first progress since November unless you count replacing the right side motor mount in January and getting the car registered in my name in November or December. 

So today my progress was to permanently mount the steering rack.  I won't re-hash all the details but late last Fall I had to order longer mounting bolts as the T-Bird rack requires spacers between the rack and crossmember.  By the time they came in I had already pushed the car into its Winter spot.  I had to cut about 3/4" off the right side bolt as it would have hit the bellhousing by the starter. 

Next on the list is routing and installing the power steering hoses.  Fair warning...I may be asking for guidance in routing them.  I can't remember how they were routed when I disassembled the car.  Something that has to be done first is to get the hose ends at the rack end cut off and converted to AN-6 flare (female).  The originals are o-ring bubble flare and the T-bird rack has flare adapters.  I don't want to buy hoses, pump or rack so the easiest thing to do is get the hose ends modified.  Hopefully the local hydraulic shop can do it.  The former shop owner (retired) says they can do it. 

When I go to install, I will likely need guidance on hose routing.  I'm glad to be back on it. I hope to make good progress this Summer. 
rob289c

dga57

Quote from: rob289c on March 19, 2023, 10:05:12 AM
Still snowing here in Upstate NY, but Spring starts tomorrow so it's a matter of time.  I plan to rearrange the shop mid to late April so I can start working on it again.  I am looking forward to getting back on it and getting it running and roadworthy over the course of the Summer.  I know my wife will want me to do other things, but this project is high on my list to get done.  I envy those of you that have nice weather year 'round and can can play with your toys whenever you want!  Hopefully soon I will be making more regular progress reports, and requests for advice and help...

Looking forward to it!!!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

Still snowing here in Upstate NY, but Spring starts tomorrow so it's a matter of time.  I plan to rearrange the shop mid to late April so I can start working on it again.  I am looking forward to getting back on it and getting it running and roadworthy over the course of the Summer.  I know my wife will want me to do other things, but this project is high on my list to get done.  I envy those of you that have nice weather year 'round and can can play with your toys whenever you want!  Hopefully soon I will be making more regular progress reports, and requests for advice and help...
rob289c

rob289c

No progress on my project this weekend.  Single digits on Friday, below 0 Friday night and early Saturday morning.  It warmed up today so I hosed out the garage floor, sprayed the salt off the cars, and hosed down the driveway.  The power washer is in the basement and didn't get it out.  A few more weeks of Winter and Spring will be here...
rob289c

rob289c

I can't remember who I bought it from...I bought it 2-3 years ago.  I have the packing slip and/or invoice in my project folder.  I can look it up.  The upholstery guy was pointing out deficiencies that are noticeable if you look for them but it's good enough for this project. 
rob289c

dga57

I think that seat looks pretty good.  From what company was the material purchased? 

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

Yep, thanks...good enough for me!  I got the seat frames from an old, defunct junkyard and the original covers were blue and in terrible shape.  The burlap was rotted and vinyl ripped and cracked.  I did a little fabbing and welding on the frames and now with the new padding and seat covers, they are WAY BETTER! 
rob289c

firepinto

When someone restored my 73 Mach 1, they didn't use original looking covers or door cards, but they still do look nice.  A guy could go broke trying to keep everything original looking.  I think the seat turned out great!
'79 Pinto auto hatch back with an '80 2.3L and 4 speed transplant.  A 2.3 Turbo and T5 are waiting for the next transplant.

Plans changed, going V8 with TKX!

rob289c

I picked up my seat today.  Overall it came out pretty nice.  The upholstery shop owner did say that the seat cover material was pretty crappy quality and wasn't completely satisfied with the way it came out.  It looks fine to me and this isn't supposed to be a pristine show car anyway.  He had to modify it by cutting a slit in the center for the parking brake lever to protrude through.  On a Mustang, the parking brake is under the dash and pulls rearward.  I cut the Pinto parking brake well out of the area between the front seats and welded it into the Mustang driveshaft tunnel between the rear seats.  Since that isn't where it normally would have been, the seat cover needed a slit cut.  He did a nice job of building up material around the slit to create more integrity.  As a side note, it was almost impossible to find rear seat-only upholstery for a Mustang.  I had no need for the front seat upholstery as there are no front seats in this ride (will be driven from the rear seat) so I didn't want to buy an entire kit.  What I found wasn't high quality, and not even a proper reproduction with correct ribbing, but it was all I could find so that's what I got.  Take a look below.  I have the interior quarter panels but they are green and not ready to be installed.  I hope Winter is over soon so I can get back on this project...
rob289c

rob289c

The upholstery shop called today.  My seat is ready to pick up.  I can't get to it until Saturday.  I'll post pics after I get it and set it in place.  Spring can't get here soon enough...for several reasons!
rob289c

dga57

Quote from: rob289c on January 02, 2023, 07:03:54 PM

So there you have it....an off-season progress report. 

Way to go!!!

Dwayne ;D
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

Although my project is on Winter Hiatus, today I replaced the right motor mount.  I purchased two mounts months ago and when I installed this Fall I found that one had an M10 stud (correct), and the other had an M11 stud (incorrect).  The incorrect one, M11 - 1.75 needed a nut that I couldn't find anywhere.  The mounts don't come with nuts so I couldn't use the one from the old mount.  I temporarily threaded an SAE nut sloppily on to hold it in place, then ordered another so I could get one with the correct M10 stud.  Now I will return the incorrect one using the more recent order...the other one was from well over 30 days ago so I couldn't return it without buying another.  Thank God the recent order came with the correct stud!

So there you have it....an off-season progress report. 
rob289c

dga57

Quote from: Wittsend on December 18, 2022, 11:41:28 AM
Always good when a DMV story turns out right. Glad it worked out for you.

Ain't that the truth!?!?!? :P
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Wittsend

Always good when a DMV story turns out right. Glad it worked out for you.

rob289c

I got lucky...when I first got the back half of the Mustang the plan was to make it into a trailer to tow behind my 67 Fastback.  It was to provide more cargo space for travelling when the kids were small, plus be a novelty for car shows and cruise-ins.  It didn't have a title or registration but I figured it would be easy enough to register it as a homemade trailer.  As time went on and I decided to make it into a drivable vehicle, I had some concerns but did research what I would have to do to register it as a homemade car in NY which I figured would involve jumping through a lot of hoops.  When I got the Pinto, I titled it in my name so I could have titled this vehicle as a 1980 Ford, but pursued other options to get a title for the Mustang portion.  I was able to get the vehicle abstract form the PA DMV which included the VIV and previous owner and after contacting the guy I got it from (not the last registrant), said he found the PA title.  The previous registrant had passed away but had signed over the title to the other guy.  I compensated him for his troubles to register it in his name, then transfer ownership to me.  Long story short, I now legally own it and should have no trouble registering and getting it inspected when I get it ready for the road.  The stars aligned for me... :)
rob289c

dga57

Well, congratulations on becoming the legal owner!  Some states can make titling/registering an older car an absolute nightmare.  Virginia is one of them, and put me through hell before finally titling my '79 Continental Mark V.  It took almost a year from the time of purchase until I had it legally on the road.  So much nonsense!


Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

Yesterday I went to the DMV and registered my project as a 1967 Mustang.  I had to insure it, then register it, then cancel registration and turn in the plates (Pay $1.00 to turn in plates), then cancel the insurance and wait for my refund.  It it was a 1973 or newer, I could have titled it in my name without having to insure it.  Anyway, I am officially the owner and now I can put it on the road once it is roadworthy.  That had been a concern and I had a backup plan but now I feel better about getting it on the road "legally".  ;D  Also, my steering rack bolts arrived but I haven't gone out to install them.  I worked today so no garage time.  I may go to the office tomorrow too; I have a project I need to complete so likely no garage time this weekend.
rob289c

firepinto

I'm thinking the same, too cold for these bones in Wisconsin.  I used to like the cold in my younger days.  I'm eyeing up Florida myself.  The hot humid days will be bad, but at least my body will function correctly lol.
'79 Pinto auto hatch back with an '80 2.3L and 4 speed transplant.  A 2.3 Turbo and T5 are waiting for the next transplant.

Plans changed, going V8 with TKX!

rob289c

Winter is finally upon us and being in the Propane business, we pray for cold.  I don't expect to do much on the project until Spring.  Maybe some day I will live in a warmer climate so I can play with my cars and motorcycle for more of the year, not to mention, maybe get away from the NY politics...
rob289c

Wittsend

Here's hoping for a few warm days so you can get a good nights rest. LOL   I know the feeling. Our 35 night/60 day California temps are freezing to me. How I ever survived my New Jersey childhood I don't know.

rob289c

Yes, I did...and got a bit more done than I originally planned.  I'm looking forward to Spring so I can get this thing done and drivable.  When I wake up in the middle of the night I can't get back to sleep because I lay there engineering the next steps in my head.  Once it's don I won't have to think about it other than to just enjoy it (I hope!).  I know I will be tempted to do a few things over the Winter nd will keep y'all updated...
rob289c

dga57

Quote from: rob289c on December 12, 2022, 07:47:39 PM

I am pretty much done working on this thing until Spring.  I covered it back up, pushed it back into the corner, and backed the Ranger up to it so it's "trapped" in its spot until April or May. 

Well, at least you've had a productive summer!

Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

rob289c

Yesterday (Sunday) I returned the 5/8 x 8 steering rack mounting bolts hoping to find some 5 x 9 1/2 bolts.  8" was the longest they had.  I ended up ordering them on line.  Not cheap...$32 including shipping.  I also put together the strut rods and bushings so I could see everything in place.  My next issue is figuring out a way to adapt my new, stock, aftermarket power steering hoses to the T-bird-style rack that came with my Speedway kit.  The T-bird rack has o-ring to 6AN flare fittings, and the Pinto hoses are inverted flare.  I don't know if there is some sort of adapter fitting or if the inverted flare can be cut off and the end flared and use a 6AM flare nut.  I will post the question on the Ask the Experts forum.  I will also enlist the guidance of my local hydraulic shop.  I don't want to have to buy new hoses or pump.

I got good news when I opened the mailbox tonight...the transferrable registration arrived in the mail from the previous owner.  In NY, vehicles older than 1973 do not get issued a title.  Proof of ownership is with a transferrable registration.  I can now register this thing in my name as a 1967 Ford.  I plan to do that ASAP before our governor decides to make it harder to register an old vehicle. 

I need to check with the upholstery shop to check on my seat frame and cover.  He's had it since August.  He knows I don't need it back right away, but I would like to get it back so I can check seating position and for adapting the steering wheel/shaft to the rack.  I am going to have to shorten it some but until I get the seat in place I can't do anything to it.

I am pretty much done working on this thing until Spring.  I covered it back up, pushed it back into the corner, and backed the Ranger up to it so it's "trapped" in its spot until April or May. 
rob289c

rob289c

Some progress made today...Last week I ordered and yesterday I received a Mustang II grill.  I think it will look cool.  I will need to fabricate a surround to make it look like it belongs on there.  I mocked up the steering rack to my crossmember.  Even with the offset bushing kit that was supposed to allow the 15 1`/2" on center rack to bolt to my 16" on center crossmember, it was still about 1/8" off.  I had to resort to removing a little material from both mounting holes on the inside edges.  It is in place but I need to buy longer mounting bolts.  I bought 8" Grade 5 bolts but now know I need 9".  I'll have to see if the hardware store has them that long.  I also heated and bent my Speedway strut rods to match the OEM strut rod angle.  I test fit them to the lower control arms and through the frame and the sway bar end links to the brackets I salvaged from the OEM strut rods.  Everything seems to line up.  I am only doing finger tight.  I will anti-seize everything when I do the final assembly.  I will do a little more tomorrow...
rob289c