Mini Classifieds

1975 rear end, 8 inch, drum brakes, and axles, 3.4 gear.

Date: 11/08/2019 10:01 am
Plug Or Cover For Hatch Hinge Bolt For 1979
Date: 05/28/2017 03:20 pm
1975 mercury bobcat

Date: 08/14/2018 03:40 pm
Wheel cap
Date: 04/25/2022 11:21 pm
74 Pinto Rear Side Lights

Date: 02/18/2017 05:47 pm
Ford 2.3L new gaskets for sale
Date: 12/10/2016 04:11 pm
Esslinger 2.0 intake
Date: 03/06/2017 11:58 am
Misc. Pinto parts

Date: 11/09/2019 04:25 pm
1980 Pinto Pony for sale

Date: 08/21/2021 03:54 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,577
  • Total Topics: 16,269
  • Online today: 122
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 94
  • Total: 94
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

What did you do with/to your Pinto today?

Started by pintogirl, November 10, 2012, 08:35:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blupinto

It sounds like you got Pumpkin's leaks fixed!!! YAY!!! ;D
One can never have too many Pintos!

cutelitlputtputt

I'm going to wash mine today when it warms up.  Right now it is like 42 degrees!
Then I will put her to bed, she needs a rest after going back and forth from Yucaipa to Glen Helen for six days straight!
Anything to keep her runnin'!

mrskydog

I washed ,detailed and waxed one more time before winter. :( Took it for a drive nice day....parked in the garage and covered.....Kirk
"Living the Dream...Driving Old Fords"
1965 Mustang 2+2 Fastback
1980 Pinto Rallye 32,000 Org.
1972 Maverick Grabber V-8 car
2005 Mustang

D1

Drove mine to work yesterday and gonna drive it to Church today  :D
Thanks
May the Lord bless

Romans 14:11(KJV)

sedandelivery

I took mine to the hardware store and then to my nephews. Trying to take advantage of the time before the snow starts.

Srt

the only substitute for cubic inches is BOOST!!!

dga57

Quote from: beaner on November 10, 2012, 10:58:33 PM
i opened the garage door and let the light touch it ;D ;D

brad :)

That's more than I did with mine, although it did see a little sunlight last Saturday!
Dwayne
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

cromcru

im in the middle of installing my 93 2.3 t5 into my 74 pinto station wagon.i started the install using my 75 mustangII d5 bell housing but due to not getting enough adjustment to engage the clutch properly im now installing my foxbody bell housing.and from test fitting shows to be alright. everything went in fine.using my t5 driveshaft,front u-joint for 93 mustang,rear u-joint from 75 mustangII 2.3..only other issue i see is the speedo cable.im going to take my pinto one in and have the bottom half change over to the t5 style..when i got my d5 bell. it came with the spacer plate, bellhousing, clutchfork,throwout bearing and clutch ball stud. it did not come with the flywheel.i dont remember if the 75 model year used a small spacer behind the flywheel or a thicker plate.ill report more later
79 bobcat  78 ford pinto station wagon   93 ford mustang lx   90 ford mustang cont lx  63 chevy truck    52 studebaker 2r16a

blupinto

Last week I not only let the sunshine touch some of my Wildfire buried in the garage, but I had to go on an expedition of sorts to get to her driver side door to open it and retrieve the '74 Pinto owner's manual out of her glove box to put in the '74 Squire wagon. lol
One can never have too many Pintos!

pintogirl

Quote from: beaner on November 10, 2012, 10:58:33 PM
i opened the garage door and let the light touch it ;D ;D

brad :)

LOL, sometimes that is more then what I do to mine in a day! LOL
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

beaner

i opened the garage door and let the light touch it ;D ;D

brad :)

pintoman1972

As a matter of fact, today I decided to take the valve covers off, pull the plugs out and go through the valve train.
 
This 612 HP V8 302 motor has a Hartland Sharp top end with 3/8 screw in studs, guide plates, 1.6 to 1 roller rockers and stud girdle.  The valve lash is adjusted to zero for the high lift hydralic roller cam, and then locked down at 1/2 turn past zero.

Did the compression check on each of the 8 cylinders. Driver side varried between 155 and 165 PSI with very minimul leak down.  Passenger side varried between 160 and 170 PSI also with minimum leak down.

SO all is well with the top end and with the pistons.  Tomorrow will put it all back together. 

DIck

blupinto

I didn't do anything to ANY of my Pintos today except drive a reluctant Ruby RedHot to Starbucks and later Ralphs store. I WAS going to clean out Moxie Blu's cowl out (you can probably imagine all the stuff sitting piled in there after years of living under a pine tree) but I can't find her keys!!! AAAARRRRGH!  I had them earlier this week but who knows what I did with them!? I know I needed to "batten down the hatches" due to the rain my area was expecting but the keys disappeared since.  I was planning also to remove her instrument cluster again and see why the lights don't work but even if I could find the keys I may be going up north to help my Dad and his wife move house.


One can never have too many Pintos!

Original74

I just had my carb rebuilt and had to fine tune the fast idle screw and then the curb idle. Now from a cold start, just set the choke with a quick pump, sit back and hit the key, she fires up on full choke, light tap and she comes back down to a fast idle with a little choke. After about a minute, another tap brings her down to the last step on the fast idle cam, ready to drive. Nothing sweeter, I love it!

Dave
Dave Herbeck- Missing from us... He will always be with us

1974 Sedan, 'Geraldine', 45,000 miles, orange and white, show car.
1976 Runabout, project.
1979 Sedan, 'Jade', 429 miles, show car, really needs to be in a museum. I am building him one!
1979 Runabout, light blue, 39,000 miles, daily driver

TIGGER

I put a new car cover on my blue 73 and aired up the tires.
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

pintogirl

Quote from: Fred Morgan on November 10, 2012, 08:58:42 PM
Kim ask Bob he knows I take them to 16 pounds.   Fred    :)

I just hooked mine up to the car as seen in the pic. Figured after 10 mins. of running and not leaking, it was good to go! :D So far so good! :D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

Fred Morgan

Kim ask Bob he knows I take them to 16 pounds.   Fred    :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

pintogirl

Quote from: 78txpony on November 10, 2012, 08:49:37 PM
Today mine was actually uncovered and driven for the first time in 6 months.  It is my winter driver.    Car ran well i just had to get used to it again. I had to relearn driving a stick...

I'm lucky, my yellow one is an automatic. :D  If things go well with it this week, I may end up driving it to work and back all winter too! :D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

78txpony

Today mine was actually uncovered and driven for the first time in 6 months.  It is my winter driver.    Car ran well i just had to get used to it again. I had to relearn driving a stick...
-Rob Young
1978 Pinto Pony sedan (Old Faithful) a.k.a. "the Tramp"
http://www.flickr.com/photos/thelonerider2005/sets
1972 Cutlass Supreme Convertible (442 clone) -"Lady" (My mistress...)
http://www.flickr.com/photos/robsalbum/sets
1986 Cutlass Supreme Coupe - "Pristine"
1997 H-D Sportster

pintogirl

Quote from: Fred Morgan on November 10, 2012, 08:44:02 PM
Kim I always pressure check rads and heat cores first !   Fred    :)

Thanks Fred! Fine time to tell me now! LOL It only took one time to learn on this one. :D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA

Fred Morgan

Kim I always pressure check rads and heat cores first !   Fred    :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

pintogirl

I thought this may be a fun topic to start here. They do it over at a VW site I go to and it is a lot of fun to read what others do. It also gives someone that doesn't want to start a build thread on their Pinto, a chance to share what they have done.

I'll start if off. :D

Today I installed a heater core in my Yellow Pinto, TWICE! LOL

When I first got the car it was missing the heater core and the front cover to the heater core box. (Don't know the name of that box! LOL) So today I got into the Pinto shed and dug out another box. I got the heater core out of the box and went to put it in mine. Then I realized that the heater core doesn't stick through the cowl. UGGGGGHHHH Had to pull the remainder of my box out of the car. That was not fun. Got it out, put the new, aka used, heater core in and put the cover to the parts box on my box. All good! Installed it all back in the car, again, not fun.  Pretty much had it all hooked up and drip, drip, drip. UGGGGHHHH. Out it came. Found another complete unit in the Pinto shed and here is how I decided to test it before I put it in the car. :D



I hooked up the water lines and started the car. Ran if for about 10 minutes, then once I was satisfied the heater core didn't leak, I proceeded to pull the old one back out and install the good one. When trying to put the new one in, I broke the ducting for the floor off the one end of it. Pulled it back out of the car and grabbed one off of the other box and finally got it all back together. No leaks! :D

We also pulled the broken windshield out. Tomorrow Jr. is going to come over and install a new one for us. Then I get to start driving it to work for a few days. :D

So that is what I did to my Pinto today. What did you do to yours?


If this thread takes off, I will see if we can make it a sticky. Want to see how it goes first though! :D
Kim
www.pintobuyersanonymous.com

I have come to realize that I am powerless to cuteness of a rusty old Pinto.

Sacramento CA