Mini Classifieds

71-73 2.0 4 speed transmission wanted
Date: 09/06/2020 01:57 am
Bumpers
Date: 07/06/2018 04:47 pm
80 pinto original

Date: 08/04/2019 10:45 am
1972 Pinto SCCA BS race car

Date: 10/23/2018 04:01 pm
2.3 engine mounts,glove box parts,emblems,hatch,doors,hinges etc
Date: 08/26/2018 06:35 pm
Looking for a 1977 Ford Pinto Runabout Hatchback
Date: 10/15/2017 10:03 am
oldskool787
Date: 02/12/2017 12:42 pm
Pinto sales literature / magazine ads/ owners manuals
Date: 03/21/2017 07:47 pm
1973 Bobcat Cruzin Wagon for Sale $4000 obo

Date: 04/13/2018 11:30 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 628
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 522
  • Total: 522
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Dash Painting (and other interior pieces) :D

Started by Jippah, February 25, 2011, 08:27:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Jippah

Quote from: tinkerman73 on March 09, 2011, 05:19:09 AM
Well, they do not look too bad. I know your pain with a broker/missing "R"! I do note a addition in the new photo that was not in the old. What kind of cycle is that trying to hide there?

yea there area few junkyards out here.. but cars older than 1985 tend to be crushed due to room restraints :(

the bike is a 2006 kawasaki zx-636. its quite a bit of fun :D i also have a 2001 suzuki katana which isnt as much fun haha

Quote from: dave1987 on March 09, 2011, 12:23:15 PM
How do you like the projector headlights? I am considering swapping out my halogens on my 78 for them but not sure if I'd really want to keep them or not.


well, im not too sure about any other brand, but i can tell you that i dont think they are as bright as the stock lights for some reason... but its not that big of a deal out here, there are very few places on island without streetlights :P
*BANG*
"What was that!?"
'... Speed bump?'

1976 3door MPG 4spd 2.3L "Shelly"
-------------------------------
1993 camaro (6cyl)
2004 F150 FX4 (5.4L) "Ed" <- daily driver
2001 Suzuki Katana (blown rod) "Blue Fury"
2006 Kawasaki ZX636 "Blue Fury v2.0" (113hp on 2 wheels!)

dave1987

Do you have any junk yards on the islands? If so, the Ford emblems for the Pinto are the same as the ones for 70s mustangs and mavericks if you can find some. Otherwise I have a few sets of FORD letters, and I could send you a set but shipping would probably be a killer to the islands.

I think Pintony used projector headlights on his purple hotrod Pinto, those looks familiar.

How do you like the projector headlights? I am considering swapping out my halogens on my 78 for them but not sure if I'd really want to keep them or not.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

tinkerman73

Well, they do not look too bad. I know your pain with a broker/missing "R"! I do note a addition in the new photo that was not in the old. What kind of cycle is that trying to hide there?
Jody Michielsen

Jippah

thanks for the support fellow pinto lovers!!!

however, as i've stated before, i am still a kid (literally, 22yrs old) and bought some new projector headlights.

kinda take away from the classic look, but i think they match up with the grill and bezels very well :)

(thought i'd d a double take type set up)
old lights



new lights



note the broken "R" emblem :( 
*BANG*
"What was that!?"
'... Speed bump?'

1976 3door MPG 4spd 2.3L "Shelly"
-------------------------------
1993 camaro (6cyl)
2004 F150 FX4 (5.4L) "Ed" <- daily driver
2001 Suzuki Katana (blown rod) "Blue Fury"
2006 Kawasaki ZX636 "Blue Fury v2.0" (113hp on 2 wheels!)

popbumper

Wow, small changes that make a BIG difference. Nice work!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

tinkerman73

Jody Michielsen

dga57

I think that turned out great!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

dave1987

I love it! It looks great! :D

Here is the site that carries the Pinto Stallion decals:

http://www.phoenixgraphix.com/ford/1976mst.htm

As stated, Maverick is shown but you can order it as Mustang or Pinto.

Would be a nice touch to what you have there!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Jippah

so i got bored yesterday afternoon and decided to do some more sanding and painting.

only this time, it was the exterior. just one more step to making the exterior look more and more like this;



heres my grill and headlights before;



and after



took quite awhile to tape the bezels off



*BANG*
"What was that!?"
'... Speed bump?'

1976 3door MPG 4spd 2.3L "Shelly"
-------------------------------
1993 camaro (6cyl)
2004 F150 FX4 (5.4L) "Ed" <- daily driver
2001 Suzuki Katana (blown rod) "Blue Fury"
2006 Kawasaki ZX636 "Blue Fury v2.0" (113hp on 2 wheels!)

dga57

Quote from: dave1987 on February 28, 2011, 12:25:48 AM
I've got the search function figured out. I suppose I should have posted this earlier in the FAQ section...


If you want to search the entire forums for something, you have to go to the main forum page where it lists all of the sub forums. From there you can search every sub forum for whatever you are looking for. If you are already in a thread and use the search function, it will only search the sub forum that thread is posted in for your search terms.

For example. If you are looking at my 73 station wagon's thread in the My Projects sub forums, and you decide you want to search for "fuel pump". The search will only contain results from the My Projects sub forum. However, if you go back to the main forum page, listing all sub forums, and search "fuel pump", it will search the entire message board/forum and all sub forums for results related to "fuel pump", thus more results!

I hope this helps!

Well, it definitely can't hurt!!!  Thanks for the info!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Cookieboystoys

Quote from: Jippah on February 27, 2011, 08:46:00 PM
i actually got the idea of painting the dash while it's still in the car from looking at those exact pictures a few weeks prior  :lol:

however, i've only gotten around to the dash, and havent found the time to get the other pieces and parts done up

Haha! glad to have inspired :D

I still would warn you of my findings of the glare problem, to late for me, maybe you still have time to consider yours.
It's all about the Pintos! Baby!

tinkerman73

Thanks for the links! Now I know to go home and search, not stay in the threads! LOL. Thank you! I like the ones from starsky(?). So I sent a PM asking if they are still doing them? However, I used to do boat interiors as well as upholstry on room dividers for offices. So I know my way around the vinyl stuff. So I may eventually do my own! Great stuff on here. Also, sorry to have over thrown the thread here! LOL. Keep up the good work on your pinto!!
Jody Michielsen


dave1987

I've got the search function figured out. I suppose I should have posted this earlier in the FAQ section...


If you want to search the entire forums for something, you have to go to the main forum page where it lists all of the sub forums. From there you can search every sub forum for whatever you are looking for. If you are already in a thread and use the search function, it will only search the sub forum that thread is posted in for your search terms.

For example. If you are looking at my 73 station wagon's thread in the My Projects sub forums, and you decide you want to search for "fuel pump". The search will only contain results from the My Projects sub forum. However, if you go back to the main forum page, listing all sub forums, and search "fuel pump", it will search the entire message board/forum and all sub forums for results related to "fuel pump", thus more results!

I hope this helps!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

popbumper

Jippah:

  NICE work. With my restoration, I fully pulled the dash and stripped it (which of course meant first pulling the windshield to get the bolts that secure the dash). The dash was sandblasted this week; it needs to be primed and then refinished. For finishing, I plan to spray everything with SEM's "Color Coat", which is a very high quality semigloss finish suitable for fabric/plastic/etc., but also works well on metal. I bought it at my local automotive paint store.

  Now - on to the subject of dash refurb - the first dash I redid had the standard cracks in the vinyl. I sanded everything, trimmed cracked vinyl edges with a razor blade, cut out damaged foam, and replaced the foam with that expandable "foam in a can" insulation that can be had at home repair centers.

  After filling, I trimmed it and shaped it with a "cheese grater" type rasp. The foam was then filled with flexible bondo, another specialty item that can be found at auto paint supply shops. Filled, sanded, leveled, the dash was then coated with a "sprayable texture", let dry, and then coated with "color coat".

  While the dash turned out beautifully, I will not use it for my car, as I found an NOS dash pad that I will recolor. Dash restoration as I did it is fine, but somewhat fragile - my biggest concern was the long lasting (or not) potential of the restored dash in service, especially in Texas heat.

  Hope that was somewhat enlightening.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dga57

Quote from: tinkerman73 on February 27, 2011, 04:46:46 PM
refining "dash pad" probably would not help much. I would hate to know what a search for "pad" would come up with? Ill go through the pages as I can find time to try t search for it. I had to do that before on another topic!

     Don't feel bad... I have only limited success with the search feature too!  But I DO know the information is here; it's just a matter of finding it! :lol:

     Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Jippah

Quote from: Cookieboystoys on February 27, 2011, 09:43:53 AM
I did my white 78 with Rustoleum Colbat Blue Metallic,
here's mine ~~> http://www.cookieboystoys.com/friends/78pinto.htm

i actually got the idea of painting the dash while it's still in the car from looking at those exact pictures a few weeks prior  :lol:

however, i've only gotten around to the dash, and havent found the time to get the other pieces and parts done up
*BANG*
"What was that!?"
'... Speed bump?'

1976 3door MPG 4spd 2.3L "Shelly"
-------------------------------
1993 camaro (6cyl)
2004 F150 FX4 (5.4L) "Ed" <- daily driver
2001 Suzuki Katana (blown rod) "Blue Fury"
2006 Kawasaki ZX636 "Blue Fury v2.0" (113hp on 2 wheels!)

tinkerman73

refining "dash pad" probably would not help much. I would hate to know what a search for "pad" would come up with? Ill go through the pages as I can find time to try t search for it. I had to do that before on another topic!
Jody Michielsen

dga57

Try modifying your search... ie: covering dash pad.  Something like that.  The information is here it's just a matter of finding it!
Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

tinkerman73

Hmm, I did that search and only thing that came up was this thread? I am going to assume that the search only goes back so far in history?
Jody Michielsen

78txpony

Very nice job! 
I had not seen someone paint a dash in place.  A lot of masking but worth the trouble. 
Another step closer to completion...
-Rob Young
1978 Pinto Pony sedan (Old Faithful) a.k.a. "the Tramp"
http://www.flickr.com/photos/thelonerider2005/sets
1972 Cutlass Supreme Convertible (442 clone) -"Lady" (My mistress...)
http://www.flickr.com/photos/robsalbum/sets
1986 Cutlass Supreme Coupe - "Pristine"
1997 H-D Sportster

Cookieboystoys

Quote from: blupinto on February 26, 2011, 04:30:32 PM
Jippah, I'm glad you stuck with the blue... it fairly glows! But then, I'm a big fan of metallic interiors. ;D

I did my white 78 with Rustoleum Colbat Blue Metallic, the one drawback I found out later, that "shiny" between the dash and windshield = Bad Glare! when riding on a sunny day. If I had know that when I painted it might have thought of something different for the top of the dash, maybe a flat color for the top anyhow. That "shine" does get annoying when driving the car, sun glasses required.

here's mine ~~> http://www.cookieboystoys.com/friends/78pinto.htm

you have to scroll down a bit to the March/April 2008 updates to see my interior repaint
It's all about the Pintos! Baby!

tinkerman73

Thank you. I will have to do that! I doubt I could find a nice green? But, that is what I would prefer to do! The metal inside is in terrific condition! So the pad is the only real thing dash wise I would have to do! Carpet and drivers seat is a different ordeal. LOL.
Jody Michielsen

dga57

Jody,

Several people here have done just that... popbumper and discolives are two that come to mind immediately.  Typing "dashpad" into the search function should pull up some threads you'll find interesting if you decide to tackle this!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

tinkerman73

I keep wondering, if anyone has ever stripped the original dash pad from vinyl and foam and redone thier own instead of buying a cover? I mean I am sure the covers are nice, but that makes them thicker and plastic instead of the softer vinyl? I know its not really dificult at all to make your own door pads. How much harder would it be to make the dash pad over again? Anyways, just open mumbling. LOL. Still cant wait to see all of this together!
Jody Michielsen

Jippah

Dalefortune, I do plan on getting a new dashpad, however im probably goin to just find the cheapest offer and paint it to match..
the back panels are also pretty sun'd out.. going to repaint those too :)

I live the blue interior too blupinto!!! But it just needed a bit more "pop" ^_^
*BANG*
"What was that!?"
'... Speed bump?'

1976 3door MPG 4spd 2.3L "Shelly"
-------------------------------
1993 camaro (6cyl)
2004 F150 FX4 (5.4L) "Ed" <- daily driver
2001 Suzuki Katana (blown rod) "Blue Fury"
2006 Kawasaki ZX636 "Blue Fury v2.0" (113hp on 2 wheels!)

dave1987

It looks amazing, with the metallic it looks more so!

Those dash cap overlays are great. I did my first overlay on my 78 Sedan with black interior, so no paint was needed. I did my 73 Station Wagon's dash with one of those, last week. I left it black even though the factory interior color is brown. The interior of my station wagon is rather two tone with the replacement parts I have put in it though (black headliner, door panels and now dash cap too), which looks rather nice. Eventually I will repaint everything with a brown color though, just can't afford the special paints and adhesion promoters right now. Maybe this summer.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dga57

Quote from: blupinto on February 26, 2011, 04:30:32 PM
Jippah, I'm glad you stuck with the blue... it fairly glows! But then, I'm a big fan of metallic interiors. ;D

     Especially BLUE ones... right, blu? :rolleye:

      Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

blupinto

Jippah, I'm glad you stuck with the blue... it fairly glows! But then, I'm a big fan of metallic interiors. ;D
One can never have too many Pintos!

DaleFortune

 8)  SWEET....I'll be doing alot of that stuff when I start restoring the 75 Squire Wagon I bought last week.  I have a compressor and spray guns though so I'll use factory paint codes.  I'm gonna change the interior color to a Sand Tan or darker brown that it's original interior color.  I also will have to paint the rear wheel interior panel covers. They are in good/no cracks shape put the sun light UVs have faded an oxidized them.
Are you gonna put a new one of these in?  Ebay link:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120677420322&viewitem=&sspagename=STRK%3AMEWAX%3AIT
Life Is Only A Dream