Mini Classifieds

Bell housing
Date: 08/23/2017 05:41 am
1977 Pinto for parts

Date: 10/10/2018 06:25 pm
72 PINTO WAGON

Date: 09/23/2018 06:16 pm
2.3 engine and other parts- Free
Date: 12/13/2016 10:25 am
Clutch Cable Needed
Date: 04/03/2017 11:03 pm
Mini Mark IV one of 2 delux lg. sunroof models
Date: 06/18/2018 03:47 pm
Wanted '75 Bobcat Instrument Cluster & Wiring Harness
Date: 12/09/2018 06:59 am
sport steering wheeel
Date: 10/01/2020 10:58 pm
1975 Pinto bumpers
Date: 10/24/2019 01:45 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,584
  • Total Topics: 16,270
  • Online today: 116
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 108
  • Total: 108
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

2L vs 2.3L. Which is more efficient...??? (Mileage AND power)

Started by Pale Roader, February 04, 2011, 03:47:14 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

69GT

      The 2.8 is a great motor but like the 2.0 you'll have a hard time finding performance parts. I still say 2.3. You have all the modern transmissions and cams and heads to upgrade to. And we haven't even talked about turbos yet :). If you want horsepower the stock turbo 2.3 will hand a souped up 2.8 its butt in a horsepower contest. Think about this too: a modded N/A 2.8 will get way worse gas mileage. My friend had a beefed up 2.8 that got about 15 MPG. Now mind you it was in a Capri and it could (And did) take down an 80s IROC Camaro with a 305 in a strait up drag race :). My old SVO with a built 2.3 turbo got close to 30 MPG and could (And did) take down an LS1 Camaro. Good times...

pintomagic

Intersting topic ! All I have to say . What about the 2.8 ? I heard dual exhaust gets % 20 horse power . Don,t know much about mechanics.
76 2.8 was faster . than the other 2.8 s . I heard a 2.9 ranger engine could fit in as well .

pinto1979

I've had both and the 2.0 revved a bit freer, but I always had a soft spot for the 2.3 as I had a nicely tricked out one that made all kinds of power and had a better exhaust tone.
Pintos for World Domination!

69GT

     I'd go 2.3. You can get hydraulic roller cams that rev to 7000 RPM with the right springs. And they are better suited to high RPMs with their stronger internals and 4 instead of 3 cam towers. It's also pretty easy to change cams with the motor in because the cam comes out the front instead of the back.  Plus if you like solid cams you can put one in a 2.3. The aftermarket has headers and all the cams you will ever need. Oh, and blocks that can take 500 HP :) Spend money porting a later D port head and put big valves in it. Port a lower intake manifold from a F.I. 2.3 from the 80s and plug up the injector holes and buy a Racer Walsh 350-500 Holley 2BBL carb adapter kit. Throw in a full length header (Hard to find for 2.0) and enjoy the extra 18 cubic inches :)

The 2.0 had a slight advantage in stock form due to it being a little lighter and having a mild solid cam. It also had higher compression in 71.

That's just my opinion. Both are really fun motors. I had a 2.0 in my 72 and it was pretty quick.

71pintoracer

Quote from: Pale Roader on February 05, 2011, 07:03:51 PM

Solid lift and 7K huh...??? Is that in stock form? the redline i mean.
It had a Holley 350 and a header, stock cam advanced 2* and I turned it 7K.

What did your 2L run without the juice...?? What was done to it?
Never ran the 1/4 without the juice but went from 10 flat to 9 flat in the 1/8th. All stock internals, Weiand intake, 390 Holley, Hooker header, Isky cam w/ adjustable pulley, small alum crank pulley,
I agree w/ Big Timmy, 2.3 turbo is the way to go. EFI so it runs good, good gas mileage, runs like stink even in stock form.

If you don't have time to do it right, when will you have time to do it over?

dave1957

my 74 has  a 2.0 and i like it better than my 79 2.3 n/a of course
1979 bobcat
1974 red stinkbug
1979 orange pinto sedan aka project turbo hack
1979 orange pinto all glass hatch 52k

Pale Roader

Quote from: Bigtimmay on February 05, 2011, 07:16:52 PM
Depends on if ya wanna stay N/A of go forced induction too and carb or FI.

Because my stock 2.3Turbo pulled close to 200hp and still got 25-28 mpg and this was in a car that weighs almost double what my bobcat weighs.

A 2.3T can be swapped in with the fuel injection and all. That's what I'm doing these Lil 2.3T will give a v8 a run for its money due to it weighs alot less and can produce close to the same HP.

I should have added that i'm only interested in N/A right now.

Bigtimmay

Depends on if ya wanna stay N/A of go forced induction too and carb or FI.

Because my stock 2.3Turbo pulled close to 200hp and still got 25-28 mpg and this was in a car that weighs almost double what my bobcat weighs.

A 2.3T can be swapped in with the fuel injection and all. That's what I'm doing these Lil 2.3T will give a v8 a run for its money due to it weighs alot less and can produce close to the same HP.

1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

Pale Roader

Quote from: 71pintoracer on February 04, 2011, 09:33:04 PM
Stock vs. stock, the 2.0 will spank the 2.3 hands down. it has a solid lift cam and will happily rev to 7K rpm. The lifters in the 2.3 limit it to abouut 5k at best. Today, the down side is it is very hard to find any type of performance parts (new) for the 2.0, but there is a huge market for the 2.3. gas mileage wise they should be close, but you need to decide what is more important, power or gas mileage. The two don't really go together!  :P   For the record, my 2.0 ran a best of 13.47 in the 1/4 @ 105 MPH with a 50 shot of nitrous.  :evil:

Well... that was true 30 years ago, but today you CAN have both. Thats why i'm here, i'm just trying to figure out the best base to start with. The 2L sounds considerably better.

Funny you mention parts are hard to find for the 2L, around here thats all i seem to see parts for. Nothing for the 2.3, but lots ov 2L stuff. Maybe this'll all dry up if i trade my 2.3 for a 2L...

Solid lift and 7K huh...??? Is that in stock form? the redline i mean.

What did your 2L run without the juice...?? What was done to it?

71pintoracer

Stock vs. stock, the 2.0 will spank the 2.3 hands down. it has a solid lift cam and will happily rev to 7K rpm. The lifters in the 2.3 limit it to abouut 5k at best. Today, the down side is it is very hard to find any type of performance parts (new) for the 2.0, but there is a huge market for the 2.3. gas mileage wise they should be close, but you need to decide what is more important, power or gas mileage. The two don't really go together!  :P   For the record, my 2.0 ran a best of 13.47 in the 1/4 @ 105 MPH with a 50 shot of nitrous.  :evil:
If you don't have time to do it right, when will you have time to do it over?

Pale Roader


A bit ov a loaded question, as (if i'm not mistaken) the extra weight ov the 2.3 would make for a heavier car, and that these HP levels even an extra 100lbs would make a dent in mileage. BUT...

Which is better? I'd always thought the 2.3 would be... Its more modern, still used up till 2001 in one version or another. But it really doesn't make much more power than the 2L (and certainly not more HP PER CID), which is smaller. Which got better mileage? Can we compare them? seeing as the 2.3 only came around in 74, when the cars were 400lbs heavier than in 71, when the 2L was around.

If we could put both in a 2000lb car it would seem the 2L would be faster, and get better mileage? Or were they pigs for some other reason? Wiki entry reads: the 2L, a German engine, was 'tuned for performance'. It was also just starting to see the smog stuff, whereas the 2.3 was born into it.

Incidentally, the mileage on my 76 'MPG' is supposedly around 23/34, and the way my own heap just kept on going and going and going i dont disbelieve it (even in its dilapidated shape, and god only knows the last time it was tuned...). Still cant find any actual figures on the 71-2 2L Pinto though...