Mini Classifieds

1974 Ford Pinto Squire Wagon

Date: 05/30/2020 01:51 pm
(3) 1980 Ford Pinto Station Wagon Projects

Date: 03/15/2023 02:16 pm
79-80 full glass hatch

Date: 01/04/2017 04:04 am
looking for parts
Date: 06/19/2020 02:32 pm
Alloy Harmonic Balancer

Date: 07/10/2020 12:17 pm
2 Pinto Wagons for Sale

Date: 10/29/2018 02:02 pm
1978 ford pinto carb
Date: 02/04/2018 06:09 pm
Tire needed p185/80r13
Date: 12/31/2017 09:08 pm
4 speed pinto transmission

Date: 01/24/2021 07:54 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,582
  • Total Topics: 16,269
  • Online today: 2,558
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 2352
  • Total: 2352
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Hi there all, 71 got a new hood.

Started by 71hotrodpinto, June 06, 2009, 01:11:54 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

75bobcatv6

im going to a place called auto body world out here. 1500 covers the primer, body work and 2 coats fo paint, if i want more its 75$ per extra coat. and another 200-300 for clear they arent cheap but they do some damn good work.

71hotrodpinto

Quote from: smallfryefarm on June 10, 2009, 08:29:10 AM
  Yellow probably would be the easy choice because of the jams and what not. But i have always had a soft spot for a good lookin orange.

Yeah me too. Although even if i paint yellow again I'm still jamming it. Have to.
Earl Sheigh wants dam near 1500 for a paint job. 1000 for the "best" package and 100 extra per jam. Dam paint is expensive! LOL! Wish i "knew" someone i could trade work for. Seems most people i know that had their car painted traded work for it.


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

smallfryefarm

  When i do paint though i was thinking of a brighter "corvette" yellow, or a Bright Orange.   


Yellow probably would be the easy choice because of the jams and what not. But i have always had a soft spot for a good lookin orange.
Smallfryefarms Horsepower Ranch

75bobcatv6

in legal terms, If you haven't signed a lease you are not obligated by any means or bound by their terms, But  in the same Neither are they... Catch 22.. But it is obligatory in the statement of any complex, that Working on your car is prohibited, if you are working with anything that can Stain the ground, I.E. Oil, trans Radiator and brake fluids. I used to live in an Apartment complex, I read it Thoroughly. 90% of Complex's use the same type of generic lease agreements. some have Addendum's to them to prevent any Vehicular Maintenance.  But as stated if you don't have a contract with them you don't have to Abide by their rules, and they can Just take you to a court to get you Evicted. but that's all. =) hope that helps lol.

71hotrodpinto

Quote from: 75bobcatv6 on June 09, 2009, 11:26:43 PM
Actually Depending on the complex's rules they cant stop you from Firing it up, If the exhaust is all there and working. so they can Bite it.God i love my Neighbors. they dont give a rats patute if i fire my car up open heads or with the Exhaust on it .

Well the Complex "manager" as she calls herself, says that in the "lease agreement" there is no working on cars at all. Funny think is that after living here over 10 years, they havent had a lease agreement since they took over in 2000. Still though i could probably tell her to stick it, im going to need a good referance to get out of this place. Then when i get to actually leave, i can rap that beast a few good ones as i leave for the last time! (how childish) HAHAHAHAH!


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

71hotrodpinto

Quote from: 289pinto on June 09, 2009, 08:54:03 PM
Where did you get the hood? I really like cowl induction hoods like that. I have to either use a hood scoop or get a hood like that. I dig it!

Unlimited Products. http://www.up22.com/ They are in Hesperia Ca. The hood cost me $320+ Gas at 150 miles round trip in the Ranger. For now they have a $25 discount if you ask for thier paper Catolouge. So that helped me a bit. If your not nearby, then unfortunatly you have to add in crating, and Freight shipping. Althought they claim that they have very good shipping rates its still an extra cost you have to consider.

Yah i tried and tried to get the lowest air cleaner i could find and nothing would fit unless i changed my manifold to a lower profile performer or the like. Good manifold but i heard that they are down on power by almost 30hp in some cases compared to the Airgap i have. So i gave up and got the hood. Now i can not only keep the manifold i can also keep the 13" Ford Motorsport air cleaner with the 4" K&N element. I was shocked though, with the standard air cleaner stud it still only clears by 1/4 or so!  :o


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

75bobcatv6

Quote from: 71hotrodpinto on June 09, 2009, 10:18:25 PM
Thanks for the words of encouragement! I really like the hoods looks so it makes me feel great to know that others like it also! Yah have a lot of work in it. It doenst really show from the outside LOL. havent done anything to the exterior yet. Saving that for the last. Paint doesnt make it go! When i do paint though i was thinking of a brighter "corvette" yellow, or a Bright Orange. I love red also, but i dont know...
Talk about an underestimator! Your talking to a member if not the President of "Time Underestimators of America" LOL! I cant estimate when ill be driving it to save my life! Course id be working on it all the time cept for the "neighborhood watch" program they have around here. "come in manager, come in". "Yes go ahead", We have a code 1234 over in car stall 35, Yep hes working on his car again!" "Call the FBI!"
I HOPE that this thursday ill be able to get her moving under her own power. Im just havign trouble filling the dam transmission. Cant fill it without the engine running, cant run the engine or the nieghbors shoot me with a bazooka!
Some people just dont appreciate the music of a cammed ,headered, 2.5 exhausted,40series Flowmastered 302. SIGH!



Actually Depending on the complex's rules they cant stop you from Firing it up, If the exhaust is all there and working. so they can Bite it.God i love my Neighbors. they dont give a rats patute if i fire my car up open heads or with the Exhaust on it .

71hotrodpinto

Quote from: Fred Morgan on June 09, 2009, 05:31:46 PM
Robert nice installation. I have same problem don't want hood pins but the elec. fan was in the way.So latter I will design something. Got to keep the 73 looking stock on outside. Fred   :)

Thanks Man! I was thinking of "reverse" hood pins. Some posts pushing through the cowl support and having a cross sliding pin on something to catch the hood pin under where the current hood bumpers are right now. Could adapt it to a stock hood pull cable, or maybe get trick and attach it to a door lock solenoid and rigging it to a keyless entry or just a pushbutton.  Biggest problem is, can i get to a section of hood inside that is strong enough to hold the hood down? Not sure yet.

I may just have to bite the bullet and go regular hood pins for now as i need to do something and since i cant fabricate down in the carport without them raising hell, im stuck for something thats quick and bolt on.


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

71hotrodpinto

Quote from: 71pintoracer on June 09, 2009, 05:17:51 PM
Hey hotrod, what that hood needs now are some nice, subtle 5.0 badges, nothing to gaudy you know, just enough to let people know whats lurking underneath!  :evil: Awesome job, congrats for seeing it through.  :fastcar:

HA HA! yah i was toying with the idea, but not sure still. Thought of maybe putting some 2.3 badges on there instead!! HEHEHEHEHE! Like anyone would belive it, but it sure could be funny! Thanks for the compliments its still hard to see it as a whole because im so picky about the details of the project.

Yah i tell ya, my father always told me to complete something you start. He used to get so dissapointed when i was a young kid never finishing a model car he bought me. I started teaching myslef to never give up as long as its feasible. Plus this car has a sentimental value to me as it is my first car and im the 3rd owner in my fam. Grandma bought it in late '70 and drove it till '83, gave it to my Dad, then he gave it to Me in '87. I drove it till 2003 when we bought our 03 Focus.


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

71hotrodpinto

Quote from: 71hotrodpinto on June 09, 2009, 08:41:17 AM
hey 71hotrodpinto i am really liking that hood man it looks awesome. From what i can see you have put a but load of work into your ride i really hope you get to drive her soon!!! Started mine at the first of the year and i am real close. People just dont understand the amount of work it take to do something like this and have something your proud of. I know i wasnt expecting it. I did a lot of research of swaps expecially 71pintoracers thread. I thought man this will be a snap, they made it look pretty easy but now i know that what you dont see in their threads is the actuall work that goes on between pics. Anyway what i am saying i can see your hard work showing now get-er done.

Thanks for the words of encouragement! I really like the hoods looks so it makes me feel great to know that others like it also! Yah have a lot of work in it. It doenst really show from the outside LOL. havent done anything to the exterior yet. Saving that for the last. Paint doesnt make it go! When i do paint though i was thinking of a brighter "corvette" yellow, or a Bright Orange. I love red also, but i dont know...
Talk about an underestimator! Your talking to a member if not the President of "Time Underestimators of America" LOL! I cant estimate when ill be driving it to save my life! Course id be working on it all the time cept for the "neighborhood watch" program they have around here. "come in manager, come in". "Yes go ahead", We have a code 1234 over in car stall 35, Yep hes working on his car again!" "Call the FBI!"
I HOPE that this thursday ill be able to get her moving under her own power. Im just havign trouble filling the dam transmission. Cant fill it without the engine running, cant run the engine or the nieghbors shoot me with a bazooka!
Some people just dont appreciate the music of a cammed ,headered, 2.5 exhausted,40series Flowmastered 302. SIGH!



95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

289pinto

Where did you get the hood? I really like cowl induction hoods like that. I have to either use a hood scoop or get a hood like that. I dig it!
1978 Pinto wagon, 289, 8" rear, 17" cobra R rims

Fred Morgan

Robert nice installation. I have same problem don't want hood pins but the elec. fan was in the way.So latter I will design something. Got to keep the 73 looking stock on outside. Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

71pintoracer

Hey hotrod, what that hood needs now are some nice, subtle 5.0 badges, nothing to gaudy you know, just enough to let people know whats lurking underneath!  :evil: Awesome job, congrats for seeing it through.  :fastcar:
If you don't have time to do it right, when will you have time to do it over?

smallfryefarm

hey 71hotrodpinto i am really liking that hood man it looks awesome. From what i can see you have put a but load of work into your ride i really hope you get to drive her soon!!! Started mine at the first of the year and i am real close. People just dont understand the amount of work it take to do something like this and have something your proud of. I know i wasnt expecting it. I did a lot of research of swaps expecially 71pintoracers thread. I thought man this will be a snap, they made it look pretty easy but now i know that what you dont see in their threads is the actuall work that goes on between pics. Anyway what i am saying i can see your hard work showing now get-er done.
Smallfryefarms Horsepower Ranch

71hotrodpinto

Thanks bobcat. least someone replied....


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

75bobcatv6

looks good man, Keep at it. your alot father then I planned to be at this point, Then again i didnt think i would have a family or anything to take care of at that time. Things Change it happens =)

71hotrodpinto

Hey there,
Ive been just lurking for the last couple of years because i havent made any significant progress since then on actually driving the car! 6 years ago i actually started this crazy project. Crazy cause i didn have a house w Garage to do this. Buddy of mine asked me "how long do you think it will take you? Bring it to my place" "oh about 6 months tops" (HAHAHAHAHAHAH)
Well it sat at his place for almost 3 years. I got it 75% done and then i had to get it out (understandably. I think hes still my friend LOL)
So the last 3 ive been , working, playing with my 2 kids and when i get a free moment i go out at 10pm and like a church mouse try to make progress.

So the last few things i need to to drive it are
1.a hood retention mechanisim. (i hate hood pins, but i may have no choice since i cant fabricate down in the car port)
2.Fill the transmission with fluid and run the engine while doing so.

So heres the hood and a couple of pics that i took the night i put it on.
enjoy!
Robert


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil