Mini Classifieds

1980 pinto wagon for sale
Date: 12/11/2017 12:13 am
Front sway bar frame brackets
Date: 07/13/2017 01:05 am
1977 Pinto Hatchback Parts

Date: 08/29/2020 05:31 pm
Gas Tank Sending Unit
Date: 05/22/2018 02:17 pm
72 pinto drag car

Date: 06/22/2017 07:19 am
Lower Alternator bracket
Date: 08/26/2017 05:11 pm
hood for a 79-80
Date: 11/30/2018 10:55 pm
Wheel cap
Date: 04/25/2022 11:21 pm
WANTED: Skinny Rear Bumper w/o guards for '71 or '72 Pinto Coupe
Date: 04/24/2018 11:45 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 642
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 507
  • Total: 507
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Popbumper's '76 wagon - update

Started by popbumper, August 16, 2008, 08:59:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

popbumper

Thank you all, I'm definitely a proud Pinto owner and I can't wait to share it with everyone when it's complete. I'll keep everyone posted. I promised myself six years ago I'd fight through this project, and it's wonderful to see it come to fruition :).

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dga57

Chris,
Your dedication, patience, and attention to detail on this project never ceases to amaze me!  The wagon is looking great and that headliner is totally awesome!  I can't wait to see the finished product!
Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

74 PintoWagon

Art
65 Falcon 2DR 200 IL6 with C4.

popbumper

Russ: Sorry, I never answered your question - I bought the headliner presewn from SMS fabrics in Oregon - don't recall the cost but it's was the exact material and color, and cut perfectly for the wagon. You can't go wrong with them.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

russosborne

Wow, it is really getting there. Looking really good.
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

popbumper

Update for August 6th, 2014

Russ, I missed your comment - yeah, I was reflecting today on how far it's really come, it's been a labor of love, no doubt about it. Thanks, and PLEASE DO keep up your own work - it is SO rewarding to make it across the hurdles.

UPDATE: TODAY I took THE HEADLINER plunge, and while like most things, I spent too much, I don't care. I rented a Uhaul pickup and trailer, cost me $102, and then $275 for the installation. BUT MY GOODNESS, the guy did a PRO job, and this WAS a major hurdle to overcome, because now I can get back to installing glass, and then getting the car sanded for the finishing coat.

My enthusiasm is outrageous as I see this car coming together from what it was - a sad hulk - with lots of hidden problems - to a beautifully restored vehicle. Still striving to get it done for Spring of 2015; each event gets me closer. ENJOY THE PICS please:

https://www.dropbox.com/sh/u905j10mtmtga3t/AACDMK3N_gm987x7YFiIV-Bqa

REALLY starting to look like a car again :).

Chris

Restoring a 1976 MPG wagon - purchased 6/08

russosborne

Wow,
I just read all of this from the beginning. I had forgotten I had even participated in this thread a few years ago, even though I posted just a couple of posts ago as well.  :-[
Chris, you have really come a long way with this car.  ;D Me, I have finally figured out that for me at least I need to concentrate on just one thing at a time or else I end up giving the car away in frustration.
Although going back and seeing all you have done is making me already have plans for my new Pinto.  :P
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

dianne

Quote from: russosborne on July 06, 2014, 10:38:18 PM
Chris,(or anyone else) where did you buy the headliner?
My car came without one, so having my wife make me one isn't going to happen(no pattern to use).
Thanks,
Russ

I get mine on ebay, last one was for the Galaxie and it was perfect :)
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

russosborne

Chris,(or anyone else) where did you buy the headliner?
My car came without one, so having my wife make me one isn't going to happen(no pattern to use).
Thanks,
Russ
In Glendale, Arizona

RIP Casey, Mallory, Abby, and Sadie. We miss you.

79 Pinto ESS fully caged fun car. In progress. 8inch 4.10 gears. 351C and a T5 waiting to go in.

dianne

Quote from: popbumper on May 24, 2014, 02:53:47 PM
Now I feel worse because I already bought a presewn headliner a few years back - it's ready to install - the guy is going to charge me $275 JUST to install it.....oy!  :o

But THANK YOU for the nice thought, surely I would have enjoyed knowing how to do it myself and working with you :)

That seems a tad excessive. You may want to check around, I had mine done in the Galaxie for around the same. It's actually an eight hour job I've been told. I don't know to be honest. But I think you're doing the right thing :)
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Now I feel worse because I already bought a presewn headliner a few years back - it's ready to install - the guy is going to charge me $275 JUST to install it.....oy!  :o

But THANK YOU for the nice thought, surely I would have enjoyed knowing how to do it myself and working with you :)


Restoring a 1976 MPG wagon - purchased 6/08

DBSS1234

"NEXT: Headliner install $275 plus whatever it costs me to get it there....proba bly over the next two weeks. Just sold off one of my prized bass guitars to fund it. It sat unplayed - it deserves love.....and so does the car"

To bad you are so far away, I did my own with a pre-sewn headliner. If you were closer I'd say come over and I would show you how and save you about $150.00. ???


popbumper

(Update 5/23/14 - well not so much but...)

Dah! I have been putting together a price list for things that remain in the restore. You know, after six years of work on this car it's really added up - but it will be cool to have a "new classic car" for under $10k.....

NEXT: Headliner install $275 plus whatever it costs me to get it there....probably over the next two weeks. Just sold off one of my prized bass guitars to fund it. It sat unplayed - it deserves love.....and so does the car

THEN: Buying all new door and windshield seals, and window whisker things ($300)? After that I can install the NOS windshield...

THEN: New condenser for the A/C system - have a new compressor and the evaporator and box are all restored/installed.......

In the meantime I need to finish restoring my interior real wheel well panels, and a variety of other small things.

Getting there.....!! More pics as things continue.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dianne

Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Thanks Dianne - yeah, it's getting there. I'm so happy to see it looking like a car again - it's been a long, hard expensive road - but it's a heck of a lot less than it would have cost to restore something like a Mustang, or a '57 Chevy or such - nothing wrong with them at all (I did a frame-off of a '57 back in the 80's), but I love having something so different and unique!!!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dianne

You've painted the whole car with a guide coat? WOW, I need to do that! Never thought of the whole car, I've been doing it in bits and pieces. What a GREAT way to find everything. It looks awesome!!!

Thanks for sharing!!!
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Update 5/6/14

Literally, the years have flown. This car is on the downhill side now of completion, and I'm pretty excited about it - it's hard to believe this all started in the Summer of 2008. Right now (as you'll see if you review the photos), the car has its first guide coat of paint - trust me on this, it looks good but it's nowhere near where it needs to be. Fortunately, paint reveals missed body flaws, and I have a few.

This past weekend I finally painted my roof, while the wind wasn't blowing (rare day in Texas), and in my garage. With this complete, the following things can happen:

1) Headliner installation - the headliner was purchased two years ago, it will go to the shop within the next two weeks.
2) Buy new rubber seals
3) Windshield installation - good Lord, you HAVE to do the headliner before the windshield - augh!!
4) Install rear body panels - being refurbed now
5) Get all stainless and chrome fixed/prepped/refurbed/whatever

I want to get the car in the paint shop this Fall, and drive it next Spring. You know, it's gonna be like a new car when done. My little MPG wagon has had some creature comforts added as well. I've packed it with every NOS part I could find, including an NOS windshield, NOS dash, NOS AM radio and speaker, and NOS faux woodgrain dash trim. Upgrades from stock include adding factory air, an underhood blanket with brackets, power brakes, a rear courtesy lamp housing, and Fatmat throughout.

Getting there - what fun! Enjoy the pictures of the painting being done last weekend.

Chris


http://s1081.photobucket.com/user/popbumper/slideshow/1976%20Pinto%20wagon%20restoration/Roof%20and%20general
Restoring a 1976 MPG wagon - purchased 6/08

popbumper

Update for December 4th, 2013

Well, we had high temps of 79 degrees today with a BIG front coming, promising we won't be out of the 30's for a week starting tomorrow evening. This afternoon, I was fortunate enough to pull the car out and get some final sanding done on the roof prior to paint. It will have to wait until our next "warmup". In the meantime, progress will continue as weather allows. I wanted to get the first coat of paint on the whole car this year - got very close :).
Restoring a 1976 MPG wagon - purchased 6/08

dianne

I got lucky with this one honestly. I'm going to more when the weather gets better but having to do the paint on it and 2 other cars, so little by little on each one :D

You'll love the OCD when the car is painted though :)
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

OCD? Ridiculously so!! I knew the day I got the car and pulled the carpets up to discover the hidden rust beneath that I was opening the door to a LONG journey....because I can't leave well enough alone. Seriously! I should have never bought THIS car (paid probably 5x too much), it was mechanically shot, and had so many hidden problems, but "do it right or go home". I committed myself to it....and I'm gonna see it through. The last owner (an elderly lady) knows I am working on it - I told here we'd take it for a drive when it was done. She was excited about it  :D
Restoring a 1976 MPG wagon - purchased 6/08

dianne

You're on your way, and honestly I'm glad I'm not the only one who is OCD with the repairs...
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Well, I'm truly pissed about being laid off, but with the weather PERFECT for the last few weeks, the amount of work I got done was unbelievable. Were it not for the "break" I'd not nearly be as far.
Now, if I can get paint on the passenger quarter, rocker, and door, I'll be a happy camper. I got all of that bodywork done this past weekend (MAN - that quarter was HELL - I probably have 50 hours in it) - I also got insulation up in the roof for headliner installation.
Over the winter I will finish out the dash, install the NOS windshield, and work on a variety of external parts (I gotta start polishing up all of my metal trim and brightwork), order carpet, have custom carpet made for the rear interior, work on the plastic interior panels. Still SO MUCH to do.....
Restoring a 1976 MPG wagon - purchased 6/08

dianne

"Lucky"? LOL In a way I guess you are ;)

Well, looking forward to seeing more pictures ya know :D

Other projects give me a LOT of wanting to move forward on mine!
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

It was only about 48 today - we'll have little warmups until Thanksgiving, two months of "cold" (LOL), and then Spring starts. I'm "lucky" because I got laid off in September and I have been BUSTING HUMP trying to get stuff done. Paint this weekend, then off to the upholstery shop to install the new headliner. I'm not EVEN gonna attempt that!!!
Restoring a 1976 MPG wagon - purchased 6/08

dianne

Quote from: popbumper on November 13, 2013, 07:02:54 PM
Fortunately I'm in Texas - this weekend we have weather forecasted again Saturday at 75 degrees and Sunday 80 - woohoo! I'll get my painting done :)

Lucky you, I'm in Idaho and it's starting to get cold :(
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Fortunately I'm in Texas - this weekend we have weather forecasted again Saturday at 75 degrees and Sunday 80 - woohoo! I'll get my painting done :)
Restoring a 1976 MPG wagon - purchased 6/08

dianne

I've got the same problem coming up with weather here in Idaho. I'm thinking the propane heater will do it!
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

popbumper

Just checking in quickly. I have been maddeningly getting things done recently, trying to take advantage of the nice weather (it all changes Tuesday), so tomorrow I have to throw some more paint on the car. I'll put some more pics up tomorrow, but here's the latest:
1) Today - got some insulation in the ceiling, on top of the "fatmat". The interior is basically ready for the headliner install now.
2) Today - did some more minor bodywork/priming touches to the passenger side door, rocker, and quarter. I cannot tell you how many hours (probably 50-60 if I'd guess) I spent on that quarter getting it to look straight again. After a former collision and lousy previous owner body repair, the metal was SO beat and stretched, it would have been best to cut and weld, but I don't have the tools, skills and equipment for that. Recreating a body line, let alone a wheel well surround is REAL ART.....and a real challenge....
3) Recently - Scored an NOS AM radio; an NOS "faux wood" dash center panel; an NOS A/C motor cover (goes on dash beneath the glove box - THANKS RICHARD GALLINA!!); and NOS door pin switches. The dash will officially (except for the cluster and light switch/wiper switch)) have ALL NOS parts, including the radio speaker, dash pad, vent outlets, and heat, A/C bezel. Incredible.
Tomorrow, I will apply paint to the passenger door, rocker and quarter. The car will be fully painted EXCEPT for the roof. Since I have discovered a number of small but visible defects in the bodywork (hey, I'm not perfect  :P ), the paint will be block sanded again, small defects will be repaired, and I will let someone who is a GREAT painter finish it - probably in the Spring.
NEXT WEEK I will make an effort to get the car to the upholstery shop for headliner installation, then major work for this year is complete. Over the winter I will do lots of small part prep (interior plastic panels, outside lenses, sill plates, seatbelt restoration, etc., etc.....)
Thanks all!! Exciting to see the light at the end of the tunnel!!
Chris
Restoring a 1976 MPG wagon - purchased 6/08

74 PintoWagon

Art
65 Falcon 2DR 200 IL6 with C4.

popbumper

Update for 10/21/13

This past week, the weather has been beautiful and I am taking advantage of some time off. Installed the dash, did some more bodywork and interior prep. Have a handful of photos to share for current status. Enjoy.
http://i1081.photobucket.com/albums/j350/popbumper/1976%20Pinto%20wagon%20restoration/Interior%20and%20finish%20related/

Chris
Restoring a 1976 MPG wagon - purchased 6/08