Mini Classifieds

Wanted early pinto
Date: 10/03/2019 02:42 pm
Anyone scrapping a 1980
Date: 03/13/2020 08:46 pm
Wanted Postal Pinto
Date: 09/26/2019 05:31 pm
NOS Sedan decklid

Date: 10/23/2019 11:51 am
Want seals for Pinto wagon "flip out" windows
Date: 08/08/2017 01:44 pm
INTERIOR DELUX ARM RESTS - 2 PAIR

Date: 03/23/2018 09:23 pm
1971-74 Various Pinto Parts
Date: 01/18/2020 03:44 pm
Right side strut mount for 3rd door 1979 runabout
Date: 10/04/2019 08:43 pm
Pinto 4-spd transmissions
Date: 06/15/2018 09:15 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,431
  • Online ever: 2,670 (Yesterday at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 420
  • Total: 420
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Motor performance/configuration and how it affects mileage - questions

Started by popbumper, May 16, 2008, 04:47:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Crunluath

Well....  My Pinto made three trips from Southern California to Salt Lake City and back and I averaged 26.45 mpg and easily passed the smog sniffer test (1986 Mustang Lx specs) without a catalytic converter.
When I first got the car it ran the quarter mile in 21 seconds flat at 64 mph and I never got out of second gear, got 13mpg and would barely pass smog without any modifications.  When I was finished I was running 18.25 seconds in the quarter at 76 mph. Doing some math guestimation on my quarter mile mph I estimate I was making about 94 hp after all of the modifications, that's with a short block with somewhere in the range of 300k miles on it.
  I added a Hooker headder with all of the smog fittings (I don't think Hooker offers these anymore), a 2 1/2" exhaust system with an early 1990's Flowmaster two chamber muffler, which is louder inside the car than it is on the outside. 
I rejetted the stock 5200 carb up to (if I can remember right) 72 primary jet and 74 secondary jet and switched from the hot water choke to an electric choke and readjusted the vacuum choke pull off to pull right at engine start. I also modified the EGR spacer plate from a two hole unit, to an open plenum ( I lost some bottom end responsiveness, but at the 1000 ft mark in the quarter I can really feel the car pull harder.)
  I then had the distributor recurved for 10 degrees initial and 34 degrees total timing at 3000 rpm and left the vacuum advance setting stock.  For street use I would keep the setting at 8 degrees initial timing (the stock starter motor was having a hard time starting the car at 10 degrees initial)
  Installed the biggest Iskendarian cam with a smooth idle (I forget which grind it was but I think it had .420" lift).
  I also installed a 190 degree thermostat and a 14lb radiator cap (be careful with the radiator cap, I popped the top off of my stock radiator tank with this cap and had to have the radiator strapped to keep the pressure up.)
  Believe it or not, I kept the EGR valve fully functional because the car would ping at the first hint without it, but when the EGR was working, I could run 87 octane gas without a problem.
  For the transmission, I added a B&M shift kit and the torque converter only stalls at 1000 rpm.
  The differential has 3.40 gears and the rear tires are 235-60X14's and the front tires were 185-60X13's. I later switched to 205-60X13 front tires and lost two tenths in the quarter and my gas mileage went into the 25mpg range.
    What I plan to do now is to add a stock Ranger roller cam, new pistons and rings, bearings etc., an Esslinger windage tray, and install an 8" differential with 4.62:1 gears and a Gear Vendor overdrive for the C-4, and I found a high stall, high altitude torque converter .75" pilot (I have no idea of where it stalls at but I had one before and when I had the transmission rebuilt they installed the 1000rpm converter which took a full second off of my quarter mile times).  I will be running 235-60x15 tires in the rear and 195-70x13 tires in the front, with 2" dropped spindles (which I hope fit!!!).
  I hope some of this info is helpful.
The most fun in a Pinto, is seeing the look on a passengers face, and you hear the gas sloshing around in the gas tank after taking a turn.
Propaganda is for the ignorant.

Srt

a big motor in a little car is a nce thought but only  IF you can keep your foot out of it.  want to learn about driving for mileage? get a vacuum guage and try to drive at the speed limit with the HIGHEST VACUUM reading-the HIGHEST GEAR-the LOWEST RPM at all times.  (be prepared to have other drivers on the road to become intensly hostile)

in my experience an efficiently driven, slightly modified small CID motor will out mileage the larger motor car.

source: (long since retired) '71 4spd, 2.0, 3:73 rear gear(speedo corrected & accurate), turbo.  24-25 mpg at freeway speeds over many several hundred mile trips.

street mileage?  couldn't tell 'ya. gas was cheap & I was too busy with my foot to the floor on weekend cruise nights :laugh:
the only substitute for cubic inches is BOOST!!!

Pintony

OK, Modifying for performance and milage????
I have received real good HP results using the stock 2.0 carb.
"sorry to the 2.3 crowd I can only speak about the 2.0 but most should work no-mater what engine"

Anyway.. If the stock carb is used and it is the restrictive in the engine equation...
Pulling air/fuel through the venturi would be the same A/F ratio IF installed on a 2.0 or a 5.0.
The 5.0 would only rev to a certain point and then power would fall off.
If you take a car with a 390 C.I. engine with a 2V and install a quadrajet carb, small primary's and BIG secondaries. The 390 will be a totally different engine if you put your foot to the floor.... :fastcar:

Anyway IF you had a 2.0 with the stock carb and raised the C.R. to say 10.5 to 1 but left everything else alone the engine would make more power and be better on fuel
More C.R. = better efficiency.

Now some MAY argue???
The 10.5 to 1 is a variable.
Ask yourself....
Do you really think that the engine is really getting fully filled at idle?
the 10.5 is a SWEPT VOLUME not true C.R.
Y do you think poorly maintained and poorly tuned engines PING at WOT???
  Raising the C.R. will make better low end torq over the RPM curve.
And that is where you do most of your crusing on the freeway.
More C.R. = better throttle response
From Pintony

turbo74pinto

sorry, that fuel milage was freeway.  thats about 95% of my driving.

bob
Take a job big or small, do it right or not at all.

turbo74pinto

i dont know much about effects of mods on fuel consumption.  to be honest, if i was modding it, i never really cared about fuel consumption.  as far as a heavily modded 4 banger with lots of compression and a big bumpstick....i dont know how friendly it would be for "regular driving"  if you mean it as a daily driver.  my last mustang, 91 lx 5.0 5 speed with 3.73 and some performance goodies got about 21-23 mpg on the freeway.  id imagine it would be better in a lighter car due to the fact it takes less to move it.  as far as an efi turbo, youll get great milage out of it AS LONG as you stay out of boost....which is hard.  they have a boost refrenced fuel pressure regulator to increase fuel pressure under boost.  i think turboford has the calculator to show what different pressures do to different sized injectors.  obviously, more air....more fuel. 
just some of my .02.

bob
Take a job big or small, do it right or not at all.

Norman Bagi

Got 1977 Pinto with a 302, it gets the same gas mileage as my 5.7 liter Expedition.

The Expedition gets 13 miles to the gallon (combination city/Highway)
It is big and has allot of drag, it also is engineered to get as good mileage as is possible with a pig of a vehicle.  Throw in fuel injection, computer control, etc. (Modern Design)

My 77 Pinto has a 302, it has a carburetor, it is set up to drink gas and zoop air, as much as is possible in a 2300 Pound car, this also makes it fun yet expensive to drive.  It too gets 13 miles to the gallon with a whole lot less weight and drag, but no efficiency in this motor and definitely no computer to adjust fuel economy.  Just a big engine in a little car, 20 MPG is a dream.

77turbopinto

#3: Depending on the mod.s you will have a tough time driving it on the 'street'.

Without getting into 'absolutes', think of an internal combustion engine as an air-pump. The more air that goes through it, the more fuel it burns; it needs a presice air/fuel mixture.

Larger engines or ones with more cylinders tend to be lower 'rev.ing' and have lower idle speeds. This might make you think that there is a equalization point somewhere.

Keep in mind that OVERALL GEARING (including tire size) is very important too.

How does all of this come together for fuel economy? Keep your foot out of it!

Bill
Thanks to all U.S. Military members past & present.

popbumper

OK, I titled it this way because, realizing there are SO many factors involved, there can't be a good single answer.

Here's the general theory:

A "stock" 2.3L motor at stock HP will, in general, give good mileage because of its heritage as a four cylinder, and the way that the head, CAM, and exhaust are configured. I also understand that later, turbocharged 2.3L motors have reasonable fuel consumption in regular driving, because again, they are four cylinders.

Here's the question(s):

In considering an engine change, can someone please help me understand why and/or why not each of the following statements would be TRUE or FALSE?
NOTE: Each of these scenarios considers standard driving as "commuting" or "pleasure driving". Each also considers good mileage/reasonable fuel consumption as being in the realm of 20 mpg.

1) Putting a V8 in a Pinto will still achieve reasonable mileage, because the amount of power and torque generated by the motor easily moves the mass of the lightweight vehicle

TRUE OR FALSE? WHY?

2) A mildly modified 4 cylinder (slightly bigger cam, head work and carbueration) will get reasonable gas mileage in regular driving

TRUE OR FALSE? WHY?

3) A heavily modified 4 cylinder (heavy cam, aftermarket head, and carbueration) will get reasonable gas mileage in regular driving

TRUE OR FALSE? WHY?

Sorry if these seem like ridiculous questions (sounds like a physics class exercise, it's the engineer in me), the aim of the question(s) is to determine what would be "profitable" in terms of building a car that gets decent mileage, but still "gets on it" when asked to.

Besides, picking your brains is fun - I love the wealth of knowledge here  ;D

Chris
Restoring a 1976 MPG wagon - purchased 6/08