Mini Classifieds

Weiand Single plane manifold - for 72 Pinto 4 barrel Carb
Date: 04/25/2017 12:17 pm
1976 Pinto

Date: 10/24/2017 02:00 pm
Front sump oil pan
Date: 01/02/2017 06:54 pm
1977 Pinto for parts

Date: 10/10/2018 06:25 pm
1973 Interior parts wanted
Date: 01/02/2017 11:02 pm
1980 Pinto Pony for sale

Date: 08/21/2021 03:54 pm
1979 Pinto Sedan Delivery

Date: 06/15/2019 03:30 pm
1976 Ford Pinto Wagon - just rebuilt. 302 v8

Date: 11/11/2019 03:38 pm
LOOKING for INTERIOR PARTS, MIRRORS & A HOOD LATCH
Date: 04/06/2017 12:13 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,292
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 553
  • Total: 553
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Help / advice with 302 building

Started by mrpinto, July 04, 2007, 11:22:20 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Redeless1

Check at your local parts stores, particularly the ones that deal with your local installers/service shop professionals. Also, if you have an engine builder/machine shop in the area you may want to speak to them. Speed-Pro is/was a Federal Mogul brand- a company that was fraught with financial problems. I would not be surprised if Speed-Pro was sold off. If so, you still have the Ford Motorsport cams, which always had the exact same cam specs as the Speed-Pro.
As I stated before, some research (which I think is the funnest part of the process) can save lots of cash. Performance parts can often be sourced from your machine shops at prices that are just as good or better than Jegs or Summit- without shipping!

...performance engine building is better than sex. A woman that likes to build performance engines during sex- man, it just couldn't get any better!  :lol:
1971 Mercury Montego "Cyclone" wagon 351C Toploader Detroit Locker 9
1972 Pinto Wagon 2.0 aspiring turbo car
68 Cougar 351W Toploader
78/79 Cougar
89 SSP Mustang Texas DPS
Because Different Is Good!

mrpinto

Redeless, where do I find the SpeedPro cams? Summit Jeg's etc doesn't list them.
1979 302 Pinto Custom
1971 460 Drag Pinto

Redeless1

I believe that a split cam profile is best on the Ford engine- particularly the small blocks. The exhaust port is damn restrictive- even with porting. Personally, I have never thought .496I .520e and .520i .538e lift to be big lift. Besides, vac issues are generally caused by overlap, with duration contributing some.
My Cougar, thankfully, was manual trans with man. brakes and man.steering. Do yourself a favor (unless you are competitively drag racing,) Go wit the manual trans and no power options if possible- and then the sky is the limit (kinda) for cam specs.
As you have seen, when asking about engine building tips, there are many varying opinions that can cause you more problems than help. The best thing may be to find a really good engine builder (ask others in your area about their experiences and reputations) in your area and talk to them. I spent some time "working" at a performance engine shop, and have seen many poorly planned engines show up in order to be "straightened out." The best policy is to take your time and do LOTS of research before buying.
I once was told by an "old-timer" that when picking a cam stay on the conservative side, "you'll be happier.". My very first engine was built using his thought- it wasn't long before I had a bigger cam ordered. Once in place, I was much happier. Save being conservative for your political thought- liberal is the way to go with power building- just do it in a very deliberate and informed manner- RESEARCH IS THE ORDER OF THE DAY!
1971 Mercury Montego "Cyclone" wagon 351C Toploader Detroit Locker 9
1972 Pinto Wagon 2.0 aspiring turbo car
68 Cougar 351W Toploader
78/79 Cougar
89 SSP Mustang Texas DPS
Because Different Is Good!

302PintoMan

I am in the process of building a 347 stroker.  This is the first Ford I have built in sometime however.  The last cam I ran in my v8 vega was actually a lil to big for the prurpose and I never did ge tit to run like I wanted and had No vascuum and the low end sucked.  It was a .510/.533 lift and I had a 3500 stall.

I am going to go with a Summitt cam that I ran and really liked it is a .488/.488 and ran out great of the line and up to about 6k.  Those Big lift cams SOUND great rumbling thru the exhaust but no heavier than these pinto's are it doesn't take alot.  I am hoping to push about 450hp out of this stroker.  I seen where Edelbrock has a NEW intake for a 302 that is an Air Gap and set up for 2 4 barrels.  I am going with that and see what happens.
a true hot rodder wouldn't be content until he had created a car so violent, so hairy, so totally sick, that the very act of pressing the throttle, could result in instant death

Redeless1

My 68 Cougar's engine,351W, had the following-
.472 int .496 ex lift, 214deg@.050 int and 224deg@.050 exh. The Ford Motorsport number is M6250-a332. This is made for Motorsport by SpeedPro, I believe, as they have the same specs.The m6250-a351 is a real strong street cam also, which I ran. I ran Speedpro hypers as well (H336.030) with ported D0OE heads- it was damn strong- ripped tires going through all four gears (toploader, 8inch rear w/3.80:1 and 14inch tires). Highway @65mph was around 3200rpm
The Cougar is a good 1000lbs heavier than a Pinto (with a 4banger, anyways) I think the above cams are by far the way to go- using the fore-mentioned mfg's also. Step away from Comp Cams, yes they make a nice product but you will pay a helluva lot more than a Speed Pro cam- and they make real nice stuff too.
Have fun! Building performance engines is better than sex! :evil:
1971 Mercury Montego "Cyclone" wagon 351C Toploader Detroit Locker 9
1972 Pinto Wagon 2.0 aspiring turbo car
68 Cougar 351W Toploader
78/79 Cougar
89 SSP Mustang Texas DPS
Because Different Is Good!

High_Horse

Peening doesn't strengthen rods it relieves any potential stress points kind of like a metalergical balancing. It is a good reliability measure. .500 lift is not moderate for the street, 300 is moderate and the carb suggestion was just to allow for a good non fouling idle. I ( and this is just my opinion) look at the line between street and strip as being at about the 100 mph mark. 100 on the street is fast. I've seen alott of engine builds and people just seem to overcam for the street and then they regret it. Don't get me wrong....they sound good. 2800 sounds right for a 500 lift.

                                                               High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

mrpinto

Quote from: High_Horse on July 04, 2007, 04:39:55 PM
MrPinto,
   Well...That is an awefull lot of cam for the street. And the link that doesn't compute is the stock rods. I would suggest something in the 300's for lift and reduce the carb size to a 600. This is based on the word street.

                                                            High_Horse

I was told once I had the rods shot peened and larger studs pressed in they would easily handle moderate power.

???
1979 302 Pinto Custom
1971 460 Drag Pinto

High_Horse

MrPinto,
   Well...That is an awefull lot of cam for the street. And the link that doesn't compute is the stock rods. I would suggest something in the 300's for lift and reduce the carb size to a 600. This is based on the word street.

                                                            High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

mrpinto

I need some help from some of you engine guys. I need some advice on choosing a cam and a converter stall speed. here's the deets so far.

302 block
bored .30 over
stock crank / rods
Speed Pro Hypo pistons
Ported E7TE iron heads
Weiand Stealth dual plane intake (1500-6800)
650 DP Holley
Stock distributor Accel Coil, MSD 6AL module
Long tube headers
Transmission is in the shop right now getting rebuilt. It's a C4 auto and it's getting heavier duty components, a shift kit and a manual valve body.
The rear is an 8" with a mini spool and 3.80:1 gear ratio.
Rear tires are 295/50/15 which are about 25 1/2" tall.

The car is going to be a street / weekend drag machine. Occasional drive on the street for fun. Revs to no more than 6000rpm expected.

I'd like to know a good cam / converter stall speed choice that will work with what I already have. I emailed Comp cams and they recomended the  FW XE284H-10 which is  0.541 lift/284 duration on the intake, 0.544 lift/296 on the exhaust and 110 lobe seperation, if i went with a 2800 stall speed.

I know absolutely notta about cam specs, or how it works with converter stall speed. All I know is that I was told that the cam and converter should match for best results.

You guys have any advice?
1979 302 Pinto Custom
1971 460 Drag Pinto