Mini Classifieds

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 586
  • Total: 586
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

rearend swap out of a v-8 t-bird????

Started by shockerlover, January 23, 2006, 03:28:17 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pintony

Quote from: pintopierce on April 03, 2006, 12:42:21 PM
As far as width I have not measured my 90 8.8 rear ends width yet.

But, as far as installing it in a pinto it is not real hard.  First, remove mounting tabs from 8.8 with torch, etc.  Next, weld perches onto tubes while rearend is sitting in position.  Clamp down with u Bolts. Attach brake lines.  I plan on putting some anti-roll control arms that will be attached to my sub frame connectors to reduce wheel hop.

Like I said about width of mustang 8.8.  But installing not to difficult, just need a torch and a decent welder... 

What happens when the rear axel grease catches fire?

pintopierce

As far as width I have not measured my 90 8.8 rear ends width yet.

But, as far as installing it in a pinto it is not real hard.  First, remove mounting tabs from 8.8 with torch, etc.  Next, weld perches onto tubes while rearend is sitting in position.  Clamp down with u Bolts. Attach brake lines.  I plan on putting some anti-roll control arms that will be attached to my sub frame connectors to reduce wheel hop.

Like I said about width of mustang 8.8.  But installing not to difficult, just need a torch and a decent welder... 

fast34

Maybe you haven't heard, THEY DO NOT FIT!!!!!  WITHOUT MAJOR MODIFICATIONS!!!!!

ford guy

no go with  89 lx mustang auto trans   3:73 gears

Tude

IMO
the 8.8 has very weak axles you can find them in any fullsize car 79-91 and i think f150 have them (they will have leaf spring pads) but if i was putting a new rearend in anything that i had to fabricate i would go with a 9 inch
custom fit hammered and bent


shockerlover

Yea i checked them all the cheapest one was 600 and i figured that to be a bit much... Anybody live near east tennessee that wants to sell one i would be more then happy to buy it for a decent price...

thx

wagonmaster

Out here, at the self-service yards, complete rearends are $50-$75. Have you tried any local yards to see what they may have to offer?
Brien - wagonmaster
'85 LTD LX
'85 LTD Squire wagon

shockerlover

dude it is bruning the oil like a locomotive train burns coal

77turbopinto

I understand the money issue, been there, trust me.

You can find those rears we mentioned for around 100 bucks (give or take, from what I have seen) or one from a 67/68 stang v8 (not too much to do to install, but will be 5 lug), but keep in mind that your stock rear will last a while if you drive VERY easy. That might help you get going, and you can change it out later. You are also looking at a bunch of other parts to make or buy (driveshaft, engine mounts, exhaust, radiator + hoses, front springs.....), I reccamend doing an estimate on those parts as well, and see how it all works in you budget. If you NEED the car it will do you no good to have it half done and be out of money.

It might be cheaper to find a newer running daily driver than installing a v8 in a pinto; Just some old junker that runs and drives that you don't care about (I have had a few of these over the years when needed). Keep the project, but another car can give you the time to get the money you need, and be able to take your time to search for cheaper parts, or make them yourself.

BTW: Is it leaking the oil or burning? (I have done a few rear main seals on them that were like a garden hose)

Bill
Thanks to all U.S. Military members past & present.

Pintony

Quote from: fast34 on January 24, 2006, 12:00:05 AM
Save yourself alot of trouble/time and find an 8" out of a Must. 2 or a pinto.  They do bolt right in without any modifications as I just did my '78 pinto.  Maybe you'll get lucky and find a Mustang 2 with a factory sway bar that is also a bolt-in with the exception of drilling 4 holes.  Both my 78 v-6 and 78 2300 cars have them and they really do help with the typical Pinto body roll while cornering hard.  Trust me, it is easier to spend the money and get one of these bolt-ins, than to spend a whole lot of time just to have a cobbled up mess when you are done.

Well Put!!!
From Pintony

fast34

Save yourself alot of trouble/time and find an 8" out of a Must. 2 or a pinto.  They do bolt right in without any modifications as I just did my '78 pinto.  Maybe you'll get lucky and find a Mustang 2 with a factory sway bar that is also a bolt-in with the exception of drilling 4 holes.  Both my 78 v-6 and 78 2300 cars have them and they really do help with the typical Pinto body roll while cornering hard.  Trust me, it is easier to spend the money and get one of these bolt-ins, than to spend a whole lot of time just to have a cobbled up mess when you are done.

shockerlover

I am in elizabethton, TN (east tennessee) but heres the thing money is a big issue for me man and this bird is just setting around... believe me i would rather have the bolt on deal but if i cant find a bolt on for a really dirt cheap price then im going to have to go with the bird stuff....But w/e i do i gotta do it fast caus emy 2.3 is burning oil faster then i can put in it and it has vacuum issues and i really have learned to hate it so if there is anything else u all can help me with on installing this rearend then please do....

Thx a really pathetic newbie (lol)

77turbopinto

My (well, all really) 68 8" is about 3" wider overall. Remember when you weld on the perches, you need to set the pinion angle correct or you will be changing u-joints often. (P-man, I know you knew this, wanted him to know)

So much easier to use the bolt-in 8", and they are out there to be found.

Where are you, maybe there is one of us out there near you that can give you a hand with your project.

Bill
Thanks to all U.S. Military members past & present.

pintoman

I installed a 83 Bird axel in my Rallye.Had to cut and grind the birds mounting points,then bought spring perchs from Jegs.I centered the axel on the springs then welded the perchs on. The birds axel is about one and a half inch wider on both sides.
05 Pigon Forge Meet, 06 Carlile Meet Coordinator 06-07 Carlile Regional, Brief Case Award (ask)

Pintony

You would either have to cut the mounts off yor Pinto axel or buy new ones and use the stock Pinto leaf springs.

shockerlover

Wait would it be possible to use my leaf springs on it or would i have to use the coil... You have to forgive me i dont know much about this stuff

shockerlover

No i am going to use my pinto pacers off my pinto but that will work.... Thx man ill let u all know what happens

Pintony

Hello  shockerlover,
The rear for the T-Bird is an 8.8 it also has coil springs.

Would it fit? "YES" BUT it will require more work. The lug pattern is the 4 0n 4 1/4 stock Pinto bolt pattern NOT sure if Pinto wheels will fit... But I bet your planning on using the bird wheels anyhow.
From Pintony

shockerlover

I just found out that it is a 83 not late 80s would that make a difference

77turbopinto

The t-birds in the late 80's did not have the 8" rears. Even it it did, it would be a pain to swap. There are rears from older pinto/bobcats and mustangII's that are a direct bolt-in 8", and yes, those wheels will fit. I have an 8" rear from a 68 stang in mine, but it took some work.

Bill
Thanks to all U.S. Military members past & present.

shockerlover

Alright i have a 1980 with the 2.3 and i want to put a 302 out of a late 80 model t bird i was wondering if the rearend in that would be a 8 inch and if so could i use it and i noticed last time i saw the car that it was 4 lug would it be the same bolt pattern so i could use my wheels... Any help would be appreciated.

thx